|
Leading Exporter and Service Provider of Electronic Products such as Preset Valves, Conductivity /TDS Indicator & Controller, Microcompt Batch Controller, Conductivity / PH Meters & Transmitters, Digital Control Valves, Level Management Solutions and many more items from Chennai.
|
| Preset Valves | 
 | Preset valves provide an accurate and automatic control of a pre determined quantity of liquid to be delivered through the PD Flow Meter. A typical preset arrangement consists of a Preset Valve mounted on the PD Flow Meter outlet and connected by a mechanical linkage to the preset register fitted below the PD flow meter counter.
Design Features
- Compact design
- Accurate shut-off
- Low pressure drop
- Emergnecy stop facility
- Batch quantity upto 99,999 litres
- Bubble tight two stage cushioned closure
- Optional electrical preset switch for remote pump control
Specifications :
| Type | Pilot operated, hydraulically actuated | | Size | 800 mm NB, 100 mm NB | | Max.flow rate | 1364 lpm for 80 mm
(used with TL - 03/04 or TLD - 01/02)
2046 lpm for 80 mm
(used with TL-05/06 or TLD - 03/04)
2273 lpm for 100 mm
( used with TL-07/08 or TLD - 05/06) | | End Connections | 150 Class, ANSI B 16.5, FF/RF | | Max Working Pressure | 10.54 kg/cm2 | | Temperature | Upto 70 C | | Control | Two stage cushioned shut - down | | Mounting | At flow meter outlet |
Digital Control Valves
Digital control valve is an electrically actuated, hydraulically operated multi-function control valve. It can be used for local as well as remote controlled batching operations with electronic batch controller. The Valve also offers an in-built flow governing function.
Design features
- Precision multi-stage opening and closing
- Fail-safe design
- Low pressure drop
- Bubble-tight seat design
- Flow rate control
| Type | Electrically actuated, hydraulically operated | | Size | 80 mm NB | | Flow Range | 1500 lpm maximum | | End Connections | ANSI B16.5 RF, Class 150 | | Max. working pressure Temperature | 70 C | | Solenoid operating voltage | 230 V AC, 50 Hz | | Mounting | Downstream of blk meter |
| | Send Enquiry |
| Conductivity /TDS Indicator & Controller | | We make KI-110 is a field mounted type ( On-line) digital conductivity Indicator. It comes in IP-65 plastic enclosure. The IP - 65 plastic enclosure enqures protection from corrosive, wet, dusty atmosphere. The advanced solid state electronic module gives accurate and repetitive reading. It is very easy to install and to calibrate.
Conductivity Range:
- 0 to 4
- 0 to 40
- 0 to 100
- 0 to 2000 ( Scale is in uS/cm/ppm)
For control applications such as initiation of regeneration of automatic demineralizers, pump tripping or audiovisual alarm, the Panel mounted conductivity controller KT - 250 is the best instrument available in the market today. At the set point, relay gets energised.
| | Send Enquiry |
| Microcompt Batch Controller | | The microcompt is a powerful flow computer, designed to meet the requirements of all types of Fluid metering installations. Microcompt is designed for refuellers, tank trucks and marine applications.
Salient Features
- Self - diagnostic
- Meter error curve linerization
- Large 6 - digit backlit LCD display
- Tamper - proof and sealed calibration facility and approved by Weights & Measures department
- Accepts all types of interlocks for fail-safe operation
- Can be used with any make of flow meters and pulse generators
- RS-232 / RS - 485 connectivity
- Flameproof enclosure for hazardous area application
Weatherproof to IP - 65
Power Requirement :
| Voltage |
12 VDC / 24 VDC / 110 VAC / 230 VAC |
| Current |
250 mAmp |
| Date Entry |
4 nos. multi-function push button keys |
| Display |
1" size, 6 - digit, 7 segment, backlit LCD display |
| Memory |
64 KB EEPROM - a sophisticated firmware package to govern the system operation |
| Battery |
Not required as all the data is stored in EEPROM memory |
| | Send Enquiry |
| Conductivity / PH Meters & Transmitters | | An electrical conductivity meter (EC meter) measures the electrical conductivity in a solution. We supply these conductivity meters according to the clients specifications.
CONTROL PROCESS INDICATOR
- Microprocessor based ON/OFF controller.
- Single Channel/ Dual Channel/ Three Channel modes
- Input: Dedicated
- Display: 4 Digit, 0.5”/ 0.3”, 7 Seg. Red LED
- Range: Programmable through front Keypad
- Accuracy: +/- 0.25% F. S
- Power Supply: 230 V AC +/- 10%, 50 Hz
Optional
- Transmitter Supply: 24 V DC, 30 mA
- Alarm Output: Potential free relay Contact
- Retransmission Output: 4-20 mA DC / 1-5 V DC, Isolated
- Communication Port: RS 485/ RS 232 supporting MODBUS RTU protocol.
PH Transmitter
On-line measurement
| Output |
4 - 20 mA DC, 2 wire Isolated |
| Auto/ Manual temperature compensation upto 100 C Display |
8 x 1 LCD |
| Enclosure |
Flame - proof, IP-65, IIa,IIB,, CMRI certified software calibration with buffer solution |
| Power Supply |
24 V DC, External |
| Mounting |
2" Pipe |
| Compatible with all types of pH electrodes suitable for various service conditions Flow Through |
on demand |
| | Send Enquiry |
| Digital Control Valves | | Digital control valve is an electrically actuated, hydraulically operated multi-function control valve. It can be used for local as well as remote controlled batching operations with electronic batch controller. The Valve also offers an in-built flow governing function.
Design features
- Precision multi-stage opening and closing
- Fail-safe design
- Low pressure drop
- Bubble-tight seat design
- Flow rate control
| Type |
Electrically actuated, hydraulically operated |
| Size |
80 mm NB |
| Flow Range |
1500 lpm maximum |
| End Connections |
ANSI B16.5 RF, Class 150 |
| Max. working pressure Temperature |
70 C |
| Solenoid operating voltage |
230 V AC, 50 Hz |
| Mounting |
Downstream of blk meter |
| | Send Enquiry |
| Level Management Solutions | | From Simple, single point, low cost level sensors to specialized & complex level monitoring solutions for conducting & non conducting liquids, granuales, powders and heavy solids
- Cable end Float switches
- Conductivity type level measurement
- Float type level switch
- Side mounted float switch
- Level Sensors for granules & powders
- Tilt type level switch for clar and lime stone
- RF capacitance type level sensor
- Material level switch tilt switch
- Vibrating Fork type level switch
- Paddle type level switch
- Ultrasonic type level sensor
- Ultrasonic level transmitter
- Raddar level transmitter
- Nucleonic level transmitter
| | Send Enquiry |
| Safety Switches | | Most rugged, reliable and dependable range of safety switches. A must for every conveyor and material handling plant. Thousand of switches are in use at cement, fertilizer, Steel, Mining and power plants. Specially developed field mounting enclosures with added safety features:
- Pull cord switch
- Belt sway switch
- Heavy duty limit switch
- Zero speed switches
- Electonic speed switch with extension stand
- Speed indicator Tachometers
- Belt loading Monitor
- Belt damage Detector
- Switches with PC interface facility
- Damaged belt detector/ belt weir monitor
- Material flow switch
- Smart / Addressable Pull cord switch
Assessories
- Pull cord wire
- Typing clips
Control Instruments
- Anti collision switch for cranes
- De- interlocking switch
- Chute-Block detector
- Boot level indicator
| | Send Enquiry |
| Industrial Communication Equipments | | This unit is suitable for paging and communication application in industrial areas having hazardous atmospheres. The main enclosure of the equipment is designed to meet requirements of flameproofness as per IS:2148-2004( for gas groups IIA and IIB) and weather proofness as per IS: 12063 - 1987 for IP - 55. the handset is rendered intrinsiclly safe by using protective circuits housed inside the flameproof enclosure and designed as per IS 5780 - 2002.
Salient Features
- Equipment is certified for use in hazardous areas GAS GROUPS I ,IIa & IIB and ZONE 1 & 2 Atmospheres area.
- Flameproof Testing IS : 2148 - 2004 ( IEC 60079 - 1/2001)
- Weather proof Testing IS : 12063 - 1987
- IP Protection Class IP55
- Temperature Class T6
- CMRI Certified
- Intrinsically Safe Testing
- Two indiepended communication Channels
- Construction - suitable for easy instalation & servicing
- Compatiable with Philips/ Bosch paging system
- Simplicity of operation
- Distortion free communication on both the channels
- Front panel busy indication
- Indifnite short circuit protected
- Operating voltage selection provided
| | Send Enquiry |
|
|
© Base Electronics & Systems. All Rights Reserved (Terms of Use)