Our range of CNC heavy duty lathes are manufactured by using high grade raw material and is suitable for various industrial applications. Our range has high loading capacity that varies from 25000 kg to 350000 kg. Apart from this, their main motor power varied from 60 to 330 KW. These are also used for deep-hole boring and 5D profile machining.
 
Following table shows the technical specifications of our range:
 

		Min.	Max.
Loading Capacity	kg	25000	350000
Swing Over Bed	Dia-mm	1500	5200
Admit Between Centres	mm	4000	30000
Spindle Speed Range	RPM	1-120	1-1000
Main Motor Power	KW	60	330

 
 
Accessories used are as follows:

• Plate Slide Rest (Lamella Carriage)
• Milling Towers
• Tool Turrets
• Steady Rests for CNC Lathes (various types)
• Chip Conveyors

  Applications are of our range is as follows:

• Crank Shaft Machining (large & medium size)
• Turbine and Generator Slot Machining
• Deep-Hole Boring
• 5D Profile Machining
• Major Overhaul and Modernization of Old Skoda Machines To CNC

CNC vertical lathes offered by us are fabricated s per the industrial requirements and are available with Y-axis. These are provided with pallet changers as well as with or without C axis & live spindles. These have a load carrying capacity that varies from 800 to 7000 mm. Following table shows the technical specifications of our range:

		Min.	Max.
Table Dia.	mm	800	7000
Max. Work-piece Height	mm	1200	7900
Max. Turning Dia	mm	1300	5900
Loading Capacity	T	8	200
Power	KW	40	140

• Machine with / without C- Axis And Live Spindle
  
• Machine With Pallet Changers
  
• Also Available Machines With Y-axis
  

We also offer an assortment of centre lathes that are available as motorized tail stock, bigger spindle bores, special steady rests and are widely used in various industries. These are available in varied versions such as tool room lathes, universal centre lathes, oil country lathes, infinitely variable speed drive lathes, machines with metric and inch lead screws and gap bed lathes. Following table shows the specifications of our range:

		Min.	Max.
Center Height	mm	165	840
Swing Over Bed	mm	325	1600
Horse Power	KW	2.2	55
Admit Between Centres	mm	500	10000

Versions:

• Tool Room Lathes
  
• Universal Centre Lathes
  
• Oil Country Lathes
  
• Infinitely Variable Speed Drive Lathes
  
• Machines With Metric And Inch Lead Screws
  
• Gap Bed Lathes
  

Lathes With Special Features Such As Motorized Tail Stock, Bigger Spindle Bores, Special Steady Rests and Many More on Request For Tailor Made Solutions.

We are engaged in offering a wide range of CNC high power, high speed milling machines that are used for aerospace applications, moulds & dies energy, styling & model making and general engineering applications. These are available in various forms such as mobile gantry Machines, fixed gantry, moving table, gantry with mobile cross beam, mobile column machine, gantry with linear motors and fixed gantry with vertical mobile cross beam. Following table shows the technical specifications of our range:


Providing Machines For

• Aerospace Applications (Titanium And Aluminum)
  
• Composite / Carbon Fiber Machining
  
• Moulds And Dies
  
• Energy
  
• Styling And Model Making
  
• General Engineering Applications
  

Mobile Gantry Machines, Fixed Gantry, Moving Table, Gantry With Mobile Cross Beam, Mobile Column Machine, Gantry With Linear Motors Fixed Gantry With Vertical Mobile Cross Beam

		Min.	Max.
Long Traverse	mm	1730	12000 +
Cross Traverse	mm	2000	6000
Vertical Traverse	mm	1000	5000
Spindle Power	mm	11	80
Spindle Speed	RPM	4000	27000
Feed Rates	Mm/min		Upto 80000

Our experts are engaged in offering a wide range of CNC double column drilling and milling machines that is available in X axis travels, Y axis travels and Z axis stroke. Their spindle speed varied from 3000 to 10000 rpm and is suitable for various industrial applications.

Following table shows the technical specifications of our range:
Gantry Series

		Min.	Max.
X-axis Travel	mm	2578	20930
Bridge Height	mm	610	1828
Y-axis Travel	mm	914	4267
Distance Between Columns	mm	1371	4724
Z-axis stroke (Spindle)	mm	610	762
Spindle Speeds	rpm	3000	10000
Main Spindle Power	KW	30	56

Bridge Series

		Min.	Max.
X-axis Travel	mm	1250	5200
Y-axis Travel	mm	1000	3200
Distance Between Columns	mm	1250	3200
Z-axis stroke (Spindle)	mm	400	1000
Spindle Speeds	rpm	40-2,500	40-6,000
Main Spindle Power	KW	11/15	37

We offer a wide range of CNC floor type horizontal boring & milling machines that are manufactured by using high grade raw material as per the industrial requirements. These are durable and are suitable of varied industrial applications. Following table shows the specifications of our range:

		Min.	Max.
Spindle Dia. Range	mm	140	300
Longi. Traverse	mm	1500	30000
Vertical Traverse	mm	1000	10000
Ram + Spindle Out	mm	1700	3800
Main Motor Power	KW	40	129

CNC Rotary Table

		Min	Max(*)
Clamping Area	mm	1600 X 2500	5000 X 5000
V-Axis	mm	2500	4000 X 4000 (*)
Loading Capacity	T	25	350

*as standards ; larger possible as request
Accessories For HBMs

• Milling / Drilling / Boring / Facing Attachments
  
• Automatic Tool Chargers
  
• Floor Clamping Plates
  
• Chip Conveyors etc
  

Hydraulic And CNC Plate Rolling Machine-3 Roll Pyramid Type (Plate Bending Machines), 3 Roll Variable Geometry Type and 4 Roll Double Pinching Type
 

		Min.	Max.
Range of Plate Thicknesses in Cold	mm	3	250
Range of Plate Width	mm	600	12,000
Top Roll Diameters	mm	185	1,250

• PSG Swinging Guide Technology Davi Patent Eliminates Slipping Friction For Side Rolls
  
• ABS Automatic Balancing System High Precision SERVO-TRONIC Electronically Synchronized Parallelism
  
• Lubrication By PLT Permanent Lubrication Technology
  
• Energy Saving System EST
  
• Various levels of CNC Systems Available For Ease of Production.
  

Our range of section bending & pipe bending machines are ideal for bending different sections, bars pad pipes and are available in 3 roll as well as 4 roll configuration. Moreover, several models are available to suit different sizes of sections, bars and pipes. Owing to this, our range is appreciated in the global market.

Some Features are :

• Ideal for bending of variety of sections, bars pad pipes
  
• Available in 3 roll and 4 roll configuration
  
• Different models available to suit different sizes of sections, bars and pipes.
  

 

We offer a wide range of axes vertical machining centers that are manufactured by using high grade raw material as per the industrial requirements. These are suitable of varied industrial applications and have the following technical specifications:
 

		Min.	Max
Longi Traverse	mm	700	1550
Vertical Traverse	mm	520	710
Cross Traverse	mm	610	900
Spindle Motor Power	KW	21	40

We manufacture radial drilling machine that is offered with a capacity of 75 and 100 mm in steel with optional tapping arrangement. These machines are also offered with the option of automatic feed and manual feed spindle. Our range is widely used in the automotive and heavy engineering industry.   Some of the features of our range of radial drilling machine include:

		Min	Max
Drilling Capacity In Steel	Mm	75	100
Max. Head Stock Travel Over Arm	Mm	1614	3470
Spindle Axis To Column Guide	Mm	386/2,000	540/4,000
Height Spindle Nose Over Machine Base	Mm	473/1,803	710/2,720
Main Motor Power	Kw	7.5	11(15)
Spindle Speed Range	Rpm	11.2-2000	9-2800

CNC cylinder grinders offered by us are manufactured by using high grade raw material as per the industrial applications. Their distance lies between 500 mm to 7000 mm and are suitable for various industrial applications. Following table shows the specifications of our range:
 

		Min.	Max.
Max.Swing Dia Range	mm	250	1000
Max. Distance Between	mm	500	7000
Max. Component Weight	Kg.		3500

Die-spotting presses & die-splitters offered by us are manufactured as per the industrial applications. Their die weight varies form 2500 to 80000 kgs and platen sizes varied from 780x760 mm to 3500x2500mm. Following are the salient features of our range:
 

• Electronic Control of Parallelism
• Upper And Lower Platen Tilting (110 deg / 180 deg For Upper Platen / 70 deg Lower Platen)
• Special Resin Injection Units / Ejection Units
• Electronic PLC Controls For Press Movements And Function / Pictograms

 
Details of press positions of our range are as follows:
 

• Instant Energy Release Accumulator (Patented)
• Digital Monitoring of Pressure and Travel
• Self Learning System for the Memorization of Travel and Speeds

 
Following table shows the technical specifications of our range:
 

		Min.	Max.
Platen Sizes	mm	780 x 760	3500 x 2500
Clamping Force	T	18	500
Die Weight	Kgs	2,500	80,000