Beacon Engineering India Pvt Ltd

We offer Hydraulic Goods Lift (scissors Type)

Model	capacity (kgs)	platform size (mm) l x b	vertical travel (mm) b = c - a	min (lowered) height (mm) a	max height (mm) c
single	2000	5000 x 2900	3000	1000	4000
single	1000	5400 x 2500	3200	600	3800
double	2000	2040 x 780	2500	600	3100
double	1000	3300 x 2700	3960	650	4610
double	1000	4000 x 2750	3200	1000	4200
triple	2000	2900 x 2000	3800	1200	5000
triple	1000	2200 x 1500	2700	1000	3700
four	3000	2600 x 1500	4500	1500	6000
four	7500	1600 x  1200	3650	1050	4700
five	500	3100 x 1200	7750	2250	10000

For more details refer attached pdf.

Ideally used for a wide range of operations like lifting, feeding, accumulating, aligning and other production and assembly operations, our assortment of hydraulic lifts are heavy duty and sturdy. Having a height of up to 70 inches and load bearing capacity of 500 to 10,000 Kgs, these highly versatile lifts can be customized for our clients at the mutually agreed specifications.

The other lifts available with us are mentioned below:

•  Dock Levaler lift
  
•  Pit Mounted Lifted Table
•  Single Scissor

For more details refer attached pdf.

Engineered for smooth operation and outstanding durability, the Hydraulic Stacker Lift can handle the following applications: lift and transport skids, bales and baskets; load/unload trucks; stock shelves; and handle dies, molds, or pallets. By combining a power lift with an easy to operate manual push, these Hydraulic Stackers are perfect for maneuvering in tight or congested areas.

For more details refer attached pdf.

Servotech C Series Lift, Versatile Lift are designed for moving material between two or more levels where overhead clearance is minimal.

Perfect for record storageautomotive parts warehousing balconiestire stores distributionthrough floorretail stores freight mezzanines.


Standard Features

• Load capacity: up to 2000kgs    
• Platform size: up to 7’w x 7’l
• Travel height: up to 28’
• Operating levels: up to 4-stops
• Operating speed: 20-25 fpm
• Power: 230v/3p or 460v/3p
• Illuminated controls at each level
• Electromechanical interlocks
• All-mechanical, dual chain lifting system


Many Options Available

Top mounted drive system allows for a smaller footprint than other styles of lifts. Overhead clearance as low as 7’ from upper floor.
The all-mechanical design reduces noise and maintenance while providing a chemically clean workplace.


Surface Mount:
Tthe platform deck is 6” or 8” from the floor on the ground level and flush with the floor on upper levels.
pit mount:
Platform deck is flush with the floor on all levels (standard pit is 6”-8”). Load / unload configurations.


Structure:-

Mast is constructed from structural steel tube. Carriage uses steel channel for vertical members. Carriage deck (platform) is built from solid steel plate on a square steel tube frame.


Operation:-

Illuminated push-button stations at each level allow full call/send capabilities and inform the operator of carriage position and notify of doors open. E-stop buttons are included in every call station.


Carriage:-

Carriage is built as one piece for added strength. Platform panels are provided on non-operating sides of the carriage and snap chains on operating sides for safety.


Electrical:-

Control voltage is 24v for all switches and momentary push button stations. Push button stations are nema 12.


Mechanical Drive:-

The carriage is moved by using an electric fail-safe brake motor and reducer. Dual chains provide extra safety and durability. This drive system requires very little maintenance.


Safety Systems:-

Fail-safe electric brake locks the carriage in place in the event of a power failure. Slack chain switches shut off the motor if the chain becomes slack. Chain brakes prevent the carriage from falling in the unlikely event of a chain failure. Limit switches provide accurate leveling at each level. “no rider” signs are posted on the carriage and provided at each entry point.


Security Enclosures (optional):-

Panel and gate frames are constructed from steel angle covered by 1/2” expanded metal. These enclosures provide a means of protecting personnel from entering the path of a moving lift. Double swing interlocked gates prevent access to the carriage while in motion and when not present at that level.

For more details refer attached pdf.