Beat Box Entertainment

Neumann TLM 102 Transformerless Cardioid Condenser Microphone at a Glance:

• A great way to naturally sweeten vocals
  
• Tiny condenser with massive versatility
  
• TLM technology means low noise and high clarity

A great way to naturally sweeten vocals
Up to 6kHz the frequency response of the TLM 102 extremely linear. But just after 6kHz, Neumann built in a slight boost to bolster the presence of the voice. This characteristic adds a quality often called "sweetness" to vocals that makes them jump out in the mix. The extra smoothness tends to enhance vocals by smoothing out a highly audible frequency range and adds some extra dimension to spoken recordings. The small stature of the TLM 102 is also a major asset in applications where maintaining a clear line of sight between the vocalist and the control room or or band is a priority.

Tiny condenser with massive versatility
The TLM 102 has an extremely flexible field of application and is affordable enough to find a place in professional and project studios alike, as well as in broadcast and live sound. Its largely linear frequency response extends across the audible spectrum from 20Hz to 20kHz. Since it doesn't take up as much space as a typical large-diaphragm condenser, it is easy to position the TLM 102 in front of guitar cabinets or use it as a drum mic. And there's no need to worry about high SPLs — the TLM 102 can easily handle up to 144dB, so loud sound sources are not off limits.

TLM technology means low noise and high clarity
The letters TLM stand for "transformerless microphone." With TLM technology the usual output transformer is replaced by an electronic circuit. TLM technology ensures good common mode rejection, and prevents RF interference that may influence the balanced audio signal. The capsule's built-in elastic suspension mechanism and pop screen in the TLM 102 also further diminish the noise of handling and use.

Neumann TLM 102 Transformerless Cardioid Condenser Microphone Features:

• Maximum 144dB maximum SPL
  
• Cardioid pickup pattern
  
• 20Hz - 20kHz frequency range
  
• 132dB dynamic range
  
• 50-ohm impedance
  
• Weight: approximately 260g
  
• Diameter: 52mm
  
• Length: 116mm

_{Neumann TLM 103}Large-diaphragm Cardioid Microphone with Shockmount inside Carton Box.
Neumann TLM 103 Anniversary Features:

• Nickel finish
  
• Large-diaphragm cardioid condenser microphone
  
• Pressure gradient transducer with with one-diaphragm capsule
  
• Transformerless circuitry
  
• Extremely low noise
  
• Includes swivel mount
  
• Minimal self-noise
  
• Frequency range: 20Hz-20kHz
  
• Rated impedance: 50 ohms
  
• Rated load impedance: 1 kohms
  
• Maximum SPL for THD 0.5%2: 138 dB

Neumann U 87 Ai 
Large-diaphragm Condenser Microphone with 3 Switchable Polar Patterns________________________________________________
Neumann U 87 Ai Features:

• Variable large diaphragm microphone 
  
• Pressure-gradient transducer with double membrane capsule 
  
• The studio microphone classic 
  
• Three directional characteristics: omni, cardioid, figure-8 
  
• Switchable low frequency roll-off 
  
• Switchable 10 dB pre-attenuation 
  
• Ideal as main and as support microphone in the most differing recording situations

Rode NT1-A
Large-diaphragm Cardioid Condenser Microphone with Shock Mount, Pop Shield, XLR Cable, Dust Cover, and Instructional DVD________________________________________________
ODE NT1-A Condenser Microphone Features at a Glance:

• Acoustic Principle: Externally polarized 1" condenser with gold-plated membrane
  
• Active Electronics: JFET impedance converter with bipolar output buffer
  
• Pickup Pattern: Cardioid 
  
• Frequency Response: 20Hz-20kHz 
  
• Dynamic Range: > 132 dB 
  
• Maximum SPL: 137 dB 
  
• Cardioid Polar Pattern
  
• Ultra-low noise transformerless circuitry
  
• State of the art surface mount electronics
  
• Heavy duty satin nickel finish
  
• Internal shock-mounting system
  
• Gold plated output connectors
  
• True Condenser (externally biased)
  
• Full (20Hz-20kHz) frequency response
  
• Includes shockmount, pop shield, XLR cable, mic dust cover, and instructional DVD

Rode NT2-A Studio SolutionLarge-diaphragm Condenser Microphone with Shockmount, Cable, Dust Cover and Exclusive NT2-A Recording Techniques DVD with John Merchant________________________________________________
Rode NT2-A Features:

• The Australian designed and manufactured HF1 1" edge terminated, gold sputtered, dual 5 um diaphragm capsule.
  
• 3-position variable polar pattern: Omni, Cardioid & Figure 8; all controlled on the mic.
  
• 3-position variable high-pass filter: Flat, 80 Hz or 40 Hz.
  
• 3-position variable pad: 0 dB, -5 dB or -10 dB.
  
• Ultra low noise, transformerless SMT circuitry.
  
• Wide dynamic range.
  
• High strength heat-treated steel mesh head.
  
• Durable satin nickel finish.
  
• Internal capsule shock mounting.
  
• Supplied complete with soft pouch and clip.
  
• Designed and manufactured in Sydney, Australia.
  
• SM6 Shockmount
  
• XLR Cable
  
• Microphone Dust Cover
  
• Exclusive NT2-A Recording Techniques DVD w/John Merchant

Rode NT5Small-diaphragm Matched Pair Cardioid Condenser Microphones_________________________________________________
RØDE NT5 Matched Pair of Small-diaphragm Condenser Mics Features at a Glance:

• True condenser transducers
  
• Gold sputtered 1/2" capsules
  
• Heavy duty satin-nickel-plated bodies
  
• Full frequency response
  
• Low-noise, surface-mount transformerless circuitry
  
• Supplied as a matched pair in a custom carrying case
  
• Includes two WS5 wind shields
  
• Includes two RM5 stand mount, plus a 3/8" to 5/8" thread adapter

Rode NTG-2Directional Shotgun Condenser Microphone with Battery/Phantom Power Option, Windscreen, Stand Mount, and Zip Pouch________________________________________________
RØDE NTG-2 Supercardioid Shotgun Microphone Features at a Glance:

• Supercardioid
  
• Frequency Range: 20Hz-20kHz selectable HPF @ 80Hz/12dB octave
  
• Maximum SPL: 131dB 
  
• Broadcast sound quality
  
• Rugged metal contruction
  
• Condenser microphone transducer
  
• Weighing 161 grams approx. (5.17 oz.)
  
• Low noise circuitry
  
• Low handling noise
  
• Supplied with stand mount and zip pouch
  
• Designed and manufactured in Australia