Modern Chiorino conveyor belts and process belts have been used by industries for simple conveyance, automation, various processing plants and a vast range of special, functional applications replacing conventional rubber canvas belts. Chiorino conveyor belts and process belts offer long lasting and trouble free performance. We can help OEM designers for entirely novel concepts to device international standard conveyors.

Certainly we should also have one Chiorino conveyor belt for you.

These conveyor belts are suitable for all types of conveyors whether horizontal, roller supported, toughed, inclined, with suction or curved etc

Available in different material: These conveyor belts and process belts are available with different material such as polyurethane, PVC, elastomer, MF, polyamide, silicone, silon, P4 series .

Special features:

Antistatic and non-conductive, flame retardant (in compliance with DIN 22103 and ISO 340 standards) food quality types to FDA, 2005/79/CE and HACCPstandards resistance to abrasion, oils, fats and chemicals low noise (LdB belts). Special belts can also be manufactured with perforation, guides, profiles and sidewalls fitted.

Megapower

Megapower timing belts are manufactured by unique thermoset moulding process. The high grade polyurethane gives excellent abrasion and shear resistance.

Range: T2.5, T5, T10, T2.5DL, T5DL, T10DL, AT5, AT10, MXL, XL, L, H

Megalinear

Megalinear belts as an open length are normally used in linear motion drives. Endless jointed belts can be produced to any length by joining.

Range: XL, L, H, 3MM, 5MM, 8MM, 14MM, T5, T10, T20, AT5, AT10, AT20, TT5

Megalinear special application belts

• These are wide extruded belts for conveying industry
• Open P4 flat timing belt suitable for elevator application
  
• STD5 belts with black polyurethane and antistatic NFT for the sliding door application. The main properties of this belt is the low noise level.
  

Megaflex

These are truly endless with high traction load capabilities, enabling them to deliver exceptional performance. They are especially suited for power transmission and conveying with high loads and high speeds (up to 10,000 RPM).

Range: T10, T20, AT10, AT20, T5DL,T10DL, AT10DL

Megarib PU Endless belts

Megarib belts are manufactured in polyurethane with polyester high tension cords, which combine the high flexibility of flat belts with the power transmission capacity of V-belt. Also available megarib SE belts with a semi-elstic tension member which can be fitted on fixed centres.

Range : J, H, TB2

We offer the following rubber timing belts:

Polychain GT2:
Polyurethane toothed belt for high torque and low speed
Range: 8MGT & 14MGT

PowerGrip GT2:
Toothed Belt for Accurate Positioning & High Torqe drives
Range: 2GT,3GT,5GT,8MGT,14MGT

PowerGrip HTD:
Suitable for high torque drives
Range: 3M, 5M, 8M, 14M & 20M

PowerGrip Classical:
Highly efficient belt ensuring compact and energy saving drive design
Range: XL,L,H,XH & XXH

Mini Pitch :
High precision Toothed belt
Range: MXL 0.080”

Twin Power:
Double sided Toothed belt
Available in Power Grip XL, L, H and PowerGrip HTD 5M, 8M & 14M pitches and lengths from 381mm to 4318mm

Long Length:
Open end toothed Belt
Available in PowerGrip XL, L,H and PowerGrip HTD 3M,5M, 8M & 14M, PowerGrip GT 3GT,5GT,8MGT.

Poly V belts (Mulit-Rib belt)
Available in J , L, M sections

Polyflex JB (Polyurethane Multiple V-belt)
Available in 5M, 7M, 11M sections (single and multiple bands)

Manufactured by extrusion both polyurethane round belts and V-belts are used in various markets for transmission of light duty drives, at medium low speeds and conveying light loads. Polyurethane round belts are available in the range of 2mm to 15mm & PU V-belts in L,Z,A,B,C section.

We offer a wide range of high duty flat transmission belts with excellent resistance to temperature, oils, dust and abrasion.

Available range:

• Thermoplastic: T-E 10/20, T-OE 30/30, DG-E 10/30, DG-E 10/40
• Polyamide: T, DG HS, DG, P,Z,LT, LL series
• Truly endless PU belts: T, PU, TW series

(These are truly endless mandrel moulded, particularly suitable for both power transmission and conveying)

Suitable for:

• Graphic industry
  
• Carton box folding industry
  
• Textile industry
  
• Packaging and confectionary
  
• Mechanical constructions
  
• Wood industry
  
• Flour mills
  
• Marble and tiles industry
  

These kniting belts are manufactured in PU with high wear resistance and high tensile steel & kevlar cords tension member. These kniting belts are available in forms megalinear jointed & megaflex endless

Features:

• Constant length
• Low noice
• High efficiencies
• Wear resistance
• Low load for positioning & stepper drives
• Low pre-tensioning

Along with kniting belts we also offer roller covering and lifting belts, and can be explained as :
 
Roller covering:

The roller covering offered by us are designed to increase the coefficient of friction of rollers and are used mainly in the weaving and finishing sectors of the Textile industry. They are manufactured to the highest possible standards using specially designed elastomers.

Special features:

• High quality textile carcass with very good dimensional stability even for wet processing
• High wear resistant covers in natural rubber, specially formulated elastomers and silicones
• Consistent quality due to the fully automated cycle of production control

Lifting tapes:
Lifting belts are available in rolls pieces, with & without hole and with nylon or metal holdfast.

Features:

• High tensile strength
• Dimensional stability
• Maximum flexibility
• Oil,grease and acid proof
• No adjustments, maintenance & lubrication
• Replaces chain
• Unlimited endurance

The multiplicity and flexibility of the Modular products ensures a great number of possibilities for applications within various industries. We offer largest and most valued range of products. These belts are available in the Polyethylene (PE), Polypropylene (PP) and Polyacetal (POM). Special materials like high temperature areas, reinforced materials, electrical conductivity, non-stick, detectable polypropylene, flame retardant materials are also available

All standard materials are FDA approved for direct food contact.

Applications

• Automotive
• Bakery
• Bottling & Canning
• Dairy
• Fruit & Vegetables
• Material handling & Packing
• Meat & Poultry
• Seafood & many more

All special timing belts can be manufactured in a standard or coated execution, according to customer specific requirements.

We offer a wide range of MF elastomer belts suitable for applications in various industrial sectors. Toothed belts can be applied to the bottom surface to provide absolute synchronous drive thus avoiding any risk of slippage.

Applications of elastomer belts are:

• Carton Folding Industry
  Truly endless belts used as feeder belts on folder-gluers for smooth and corrugated cardboard. These elastomer belts are available with three different versions of the MF cover to be selected according to the type of material to be processed. The feeder belts of the NEW "HS" (High Speed) Series are suitable for use on high-speed folder-gluers (600 m/min).
  
  
• Draw Down Machines
  We have a range of endless belts for drawdown (formfill) machines to improve the filling of the packets mainly in the food industry.
  
  Various covering is available according to the type of packaging, in order to get the best ratio of needed friction and surface abrasion resistance.
  
  
• Haul-Off Belts
  These haul-off belts are primarily used for the extrusion of cables, plastics and plastic pipes on continuous production lines.
  
  Features:
  • Silent operation
  • Higher speed
  • Energy saving
  • No size limits( length, width, thickness

• Tube Winder Belts
  We offer a comprehensive range of belts for the Paper Tube Industry for all types and sizes of tube.  High tensile carcass and specially formulated elastomer provide strength with excellent flexibility and give ideal control of web resulting in high quality production.  The specially developed joint construction allows quick, efficient turn round of orders.
  

These innovative flexible slat chains offer solutions for all applications and industries. These are available in industry standard and special materials in steel and plastic. We can also supply the slat chains in special materials e.g. chemical resistant, antistatic, flame retardant etc., if needed.

Slat Top Chains Steel

Applications are mainly in the industries that use glass bottles, e.g. breweries, the wine industry and the soft drinks industry. They come in several variants like straight running, side flexing, with or without tabs, as magnet chains. These slat chains run totally level in curves and will not vibrate. The noise level is considerably lower than normal tab chains.

Slat Top, Plastic Chains

Plastic chains constitute a light-weight yet strong and silent alternative to steel chains. These chains are used mainly in the food and packaging industry for conveying of many kinds of containers. The Super Flex tracking system is also available for plastic chains, as are beveled and tab chains for straight-running, side flexing and inclined conveyors.

Roll ring is also known as self adjusting chain tensioner. Roll-Ring is a simple one component by itself acts both a chain tensioner and damper which can be used in various industries.

Benefits:

• Free standing
  
• Needs no extra space
  
• Fitted within matter of seconds
  
• Needs no special tools for installation, alingnment or tensioning arrangement
  
• Fully effective in horizontal, vertical and diagonal drives
  
• Self lubricating and maintenance free
  
• It can be used in dusty environments.
  
• Tensioner and damper in one thus reducing vibrations and noice level

Other Mechanical Accessories:

• Joining Equipment
  There are a wide choice of joining systems, designed to match different application needs
  
  
• Tension Meters
  The belt tension measuring device allows to measure the actual belt tension. This is applicable with all industrially used types of transmission belts, such as: flat belts, V belts, toothed belts, poly-V belts etc.
  
  
• Flexible Couplings
  • Compensate angular, parallel & 3D misalignments
  • Constant velocity, angular accuracy in rotating systems
  • No backlash, no moving parts, maintenance free
    

Timing pulleys are manufactured under technical guidance and license from Gates. Wide range of material can be used such as steel, aluminium, special plastics to various graded castings and alloys etc. Along with stock pulleys are available in the XL, 8M pitches. Made to order timing pulleys can be supplied as per request.