These cylinders are ideally suited for supporting function in constuction and mining industries, in the handling of heavy industrial equipments, steel, and for mobile transport systems. Also used in machine tools as positioning and loading cylinders and for maintainence activity in railways and overhead craning equipments.

• Models include
• LSP( spring return)
• LLP (Load return)
• LLT (Threaded ram with lock nut)
• SSP( Shorty rams)
• FSP( flat jacks)
• LSHC & LDHC( Centre hole Jacks)
• LD (Double acting Jacks)
• ALP( Aluminium Jacks) etc.

Features:

• Heat treated alloy steel body
• Hard chrome plated ram for surface protection in spring return snd plain ram jacks
• High pressure, long life seals
• Supplied with quick coupler with dust cap
• Fixing holes at the base
• Surface treatment on cylinder body & tilting saddle can also be provided on request
• Working Pressure 700 bar
• All jacks designed & tested to ASME standards

'BEMCO mechanical jacks have beenused for decades in various fields and specifically in the Railways, Dockyards and Mining industry. Available in various models they have prooved to be rugged and dependable. Models include:

• Track Jacks (for rail track maintainence)
• Journal Jacks (low height jacks for maintainence)
• Reel Jacks (for cable work)
• Ratchet Jacks (for lifting heavy loads)
• Geared jacks (for controlled lifting and lowering of loads)
• Traversing bases (for traversing of lifted load)
  

Electromechanical lifting jacks are used in sets for the lifting of Railway Rolling stock such as Engines, Bogies etc for repairing in Railway Workshops. They are also used for general repair work of big automotive jobs and wherever synchronous lifting is required.

Features:

• Available in 15T,25T,35T,50T capacity.
• Lift height 1500mm to 2500mm.
• Electrical / Electronic controls for synchronous lifting of all jacks.
• Emergency all stop functions for safety.
• Sensor for wear out and wear compensation.
• All operation from common control panel

'BJ' make Hydraulics Cylinders are designed for high efficiency performance and easy maintenance, widely used in Steel Plant, Cement Plant, Sugar Plant, Ferro Alloys furnaces, Mining, Earth moving Equipments, Machine tools and Automobiles.

RANGE:

• Cylinder bore conform to CETOP/ISO3320/IS 8208/
• Maximum stroke of 5000mm.

Cylinders are available in various mounting styles:

• (Front)flange mounting
• (Rear) flange mounting
• Male/Female clevis mounting
• Head end / cap end / central trunnion mounting
• Foot mounting
• Plain piston rod end
• Male / Female threaded rod end
• Rod end with eye

MANUFACTURING AND TESTS: Cylinders are made of cold drawn seamless steel tube(CDS), material conforming to ASTMA 106 gr . B or DIN 2391,they are precision honed.The life of the cylinders is enhanced using highest quality seals from Bushak Shamban / Parker / Hunger / Simirit etc. They are tested as per ANSI / IS 10585 for pressure / static /internal leakage and static friction.

Special Features

These features are provided as per customer / end use requirements.

• Inner diameter chrome plated for corrosion resistance and low seal friction.
• Cylinder outside surface coated for marine application.
• Imported sealing system with non metallic guide rings on piston and rod.
• Cylinder end and / or rod end with adjustable or non adjustable cushioning.
• Clevis and rod end eye fitted with plain spherical bearings.
• Stop tube provided in extra long Cylinders.

We are manufacturing and supplying a wide range of telescopic cylinders which are offered in specific and customized specifications. These cylinders can be availed from us as per the specific requirements of the customers. These cylinders are used in:

• Atomic plants
• Hydro plants
• Thermal plants
• Defense
• Aerospace
• Railways

We manufacture a wide range of hand pumps which are provided with the following features:

Features:

• Working pressure 700 bar
• Designed for heavy duty and high efficiency
• Least hand efforts
• Hardened and ground plunger
• Inbuilt suction valve,delivery valve and release valve
• Relief valve adjustable,however set to maximum pressure
• Pressure gauge can be attached to the pump

Two speed hand pumps have two relief valves, one for low pressure and the other for high pressure. The change over from high discharge at low pressure to low discharge at high pressure is automatic.

We provide a wide range of hydraulic power packs with the following features:

Features:

• Pressure 700 bar Hydraulic power pack with electric motor / Diesel engine /Petrol engine driven are available with push button and lever operated directional control valves
• Single stage construction available
  
• Maximum discharge : 500 L/min
• Maximum working pressure : 700 bar

We manufacture a wide range of hydraulic accessories which are listed below:

Hoses

• Thermoplastic, steel wire braided hoses
• Maximum working pressure 700 bar
• Spiral spring gaurd on request

Pressure Gauges

• Calibrated to read in bar, KN or Tons
• Easy installation

Quick Change Coupler

• Standard equipment on all 'BJ' jacks
• Fitted with dust caps
• Standard size 3/8" NPT

D.C.Valve

• Direction control valve in 4 way / 3 position
• Allows Forward Hold and Retract functions
• Used with all Double Acting Cylinder

Relief Valve

• Used to limit pressure developed in the system

Pilot Operated Check ValveShut Off Valve/Needle Valve

• Meters the quantity of oil into the System.

Adapter / Fitting /Manifolds

• Used for connection of various valves/gauges pumps.
• Used to hold load in case of loss of system pressure generally with Double Acting Cylinde

Our Bj range of Hydraulic tools include:

• Track link pin press ( ideal for removing and assembling pins in earth moving equipments)
• Bolt Tensioners ( upto 300 tons for metric threads)
• Pullers ( for removal of bearings, bushes, sprokets etc. Capacity upto 100tons)

Our range of hydraulic presses includes:

Workshop & Bench Presses:

• Ideally suited for assembly and disassembly of components in a general Engineering Workshop
• Fitted with dual speed Hand Pump
• Winch for adjustment of daylight
• Higher Tonnage models have double acting Cylinders
• Light weight yet sturdy
• Higher Models can be fitted with power pack for higher working speeds
•  Available in standards and custom built models

C-Frame Presses

• Ideally suited for Assembly, dismantling , forming of small components
• Cylinders fitted with high life seals for better Performance
• Extra length guides for eccentric loading
• Built in power pack
• Compact and sturdy design
• Push button & hand lever operated

H- Frame / FOUR Column

• Ideally suited for variety of application such as deep drawing
• Sturdy, computer designed sections for optimum load distribution
• Programmable logic controls for easy operation and setting
• Compact power pack with valves mounted on manifolds
  
• Custom built as per specific requirements

These platforms are most essential & indispensable for loading / unloading, transport, repairs packing, inspection at height and are custom built . These are highly versatile and portable. Some models also self propelling. All versions have load safety valve in case of pressure drop in the system. The models which are manufactured and supplied by us are:

Scissor Type(Hydraulic Lift Tables)

• Single / Multiscissor type


• Portable / self propelling


• Hand pump or pump pack as required

Telescopic Type

• Multistage single cylinder type


• Portable


• Used for greater heights

Lifting Swiveling Platform

• Specially designed for Railways


• Swivelling 180 at any height


• Specially designed to take cantilever Loads

FEATURES:

• Pilot operated check valve fitted in cylinder to lock creeping of load


• Adjustable lifting speed


• Bushes / bearing at joints


• Mechanical stabilizers


• Chequered plate on working platform to prevent slippage


• Detachable railing on working platform


• Telescopic ladder


• Push button stations at bottom & top for high lift tables

Equipment mainly comprises of jacks of various capacities and sizes attachments, powered by petrol engine pumping unit and controlled by master hydraulic control table, hoses and trolley, bridge, wire ropes and other hardware.

TELESCOPIC JACKS

Made from light Aluminium alloy , these jacks have a repressure system for returning to initial position, and are fitted with hardened saddle. They incorporate safety features such as blow of valve for excess pressure , hydraulic locking against pipe burst and protection from load slipping from the jack head.

PUMPING UNIT

A portable pumping unit powered by petrol/diesel engine is compact and easy to handle.

CONTROL DESK

Houses the control block (Direct control valve) which directs the flow of oil to the required jacks. Fitted with Quick Change Couplings, pressure gauge and safety valves.

RERAILING BRIDGE

Light weight bridges are used for horizontal displacement along with roller carriage assembly two or more can be coupled using bridge coupling.

EQUIPMENTS FOR LATERAL TRAVERSING

Roller carriage /displacing jack/single control supports, Removal Top plate, Distance bars. All these equipments are assembled on the bridge along with the required jacks for lateral traversing.

Stacking sets:

Used with jack of jack low closed height when initial ground clearance is less when used, this work as a multistage jacking system.

EQUIPMENT FOR OVERTURNED CAPSIZED VEHICLES

This mainly consists of Aluminium alloy step jacks rocker bearing plate and lifting belt used along with other accessories to raise the cap sized and overturned rolling stock.