Mouse & Rats Trap Machine
this invention is related to trap the mouse/rats in the agricultural and domestic areas. Because rats are proved that they are harmfull to mankind by producing many deseases and ruiningour granaries. They are the inevitable pests in the agricultural fields especially in the case of grains. The rats are not only the carriers of many communicable deseases but also a harmful pest to human. But todays market does not provide more convenient and effective methods to check the population of mouse / rats. There we introduce a new machine called 'the black cat' - rat trap and kill the mouse / rats of any size at any time at any rate.
unlike the other trap this is not made in the form of a cage. So the food stuff on the trap appears just lying on the ground and the mouse/rat does not hesitate to take the food stuff. If the mouse/rat is trapped in the other cage form traps the panic stricken mouse/rat moves randomly and collide with the cage and there is a chance to urinate. This violent actions will secretes pheromones and produce a nasty smell which remains even after washing the cage. By detecting this smell the other mouse/rat hesitates to enter into the cage. But in this trap it kills the mouse/rat by one heavy thud by the hammer. The hammer falls heavily and presses the mouse rat at the same spot on the trap until the mouse/rat is removed. So the urine falls outside the trap. If any smell is produced it can be washed thoroughly,because the body of the trap is made of plastic. Smell does not stick for long on the plastic. This trap is designed to appear more attractive than other traps. This trap consists of ten parts. So if there is any depreciation to any parts it can be replaced by new one and can use for long time.
the body of trap and the parts does not rust. We can use it even in the rain or sunshine at any where,because its body is made of good quality plastic and the parts are g. I. Plated. In the caged form of traps the mouse/ rat are needed to be killed and in the scissor form trap the mouse / rats are brutally killed by the sharp edges. If the rat is poinsoned there is a chance that the rat may be killed at anywhere and rot to produce a foul smell. Hence this new ' black cat '-rat trap is designed to solve all these problems and gives more result. It can be used more easily and kills the rats more easily and more effectively.
Robot Trap Machine
it is fully automatically working machine,its features are following.
this machine consist of 3 parts
1. The trap. 2. The robot 3. The bucket.
one side of robot is connected with a trap which is ideal to trap rats of any size,the otherside is connected with a bucket into which dead rats can be dumped. First select an ideal food stuff which is easily eaten by rats. Fix a piece of this food stuff on the food hook of the trap. Then lift the hammer upward and press with the hammer lock. Now the hammer is locked in the hammer lock. Switch on the power of the trap and the trap is now ready to trap. When the rats touch the food stuff-this movement unlocks the hammer and falls heavily on the neck region of the rat. The food hook is fixed at the centre of the hammer which is in the form of a ring. So that the hammer falls right on the neck of the rats. If the hammer falls on the head or any other parts of the rat,there may be injuries to produce blood from the mouth. But in this trap the hammer ring is made in the same diameter of the neck region of the rats and this hammer ring has no sharp or injuring parts. So this hammer kills the rat very easily by breaking the vertebra and spinal chord without making any injuries to make any bloody scene. So there will be no blood clot on this trap. As soon as the hammer falls on the rat the switch of the robot automatically becomes "on" and the robot lifts the trap by the two hands and moves towards the bucket. When this trap is just above the bucket the hammer opens and the dead rat falls into bucket. At the same time the hammer locks again in the hammer lock automatically.
after dumping the dead rat into the bucket the robot places the trap at same position as before. After trapping the rat it takes only 40 seconds for the trap to dump the dead rat and to get back to same place. The switch of the robot automatically becomes 'off' when the trap is placed at the same position. Now the trap is again to trap other rats. When the rat touches the food hook the hammer falls on the rat and the switch of the robot becomes 'on' and the above process repeats again. As the rats could not eat the food stuff on the food hook,the food stuff remains there and can use again to attract the rats. The machine begins to run only when the rat touches the food hook. So it takes only 40 seconds to kill the rat and to dump it. If we add further 20 seconds for the machine to rest,it takes only 60 seconds that is one minute. So we can trap 60 rats in one hour by this new machine.
it takes only one unit of current to work for 300 times. Because the machine becomes 'on' only when the rat touches the food hook and become ' off ' when the trap is put at the same place. This trap prevents the rat to rot amidst the grains,where as the other traps or rat poisons may kill the rats,so brutally or make chance to rot in the grains. So this new machine is ideal to any godown or granaries and it works more effectively by consuming minimum electricity.
Fresh & Cool Trap Machine
Nowadays atmospheric temperature is rising high.In summer it becomes unbearable.Motor vehicles drivers are most effected by this condition heat from the engine and the temperature together make a drastic condition for drivers.They are not getting any cool air and become easily tires.If they are going as a long journey it will be geadly.They become restless and may cause accidents too.Therefore to give a relief to the drivers in this condition is really is important.
Conventional methods to provide cool and Fresh airs are A/C,coolers,fan etc. But to use A/C and coolers in motor vehicles is not affordable to ordinary drivers.Fan can be used but the air provided by the fan is not enough and layer. Fans can not be used so these methods are either costly or not enough to give a comfortable ride to drivers and passengers.
Using srew driver and spanner this device can easily fix on the vehicle at the desired position. Fix the stand on the vehicle by using ‘ U ’ clamp. Then insert the rider into the stand and fix by the screw driver. While the vehicle is running the rider traps the air and diverts and spreads evenly on the drivers. This will make a fresh and cool atmosphere for drivers. In conclusion hear in presented a device to provide fresh and cool air, the invention is illustrated in thr growing figures and through out the written description.
Cocount Climbing Machine
this invention relates to improvement in device for climbing the cocunut trees. Many persons and cocunut farmers find difficulty in harvesting ripe cocunut and tender ones. Usualy farmers depend upon person to climb up the trees and to pluck the cocunut and to clean the tree top. These persons now ask for higher wages. These persons are not always available. But nowadays security of such person and accident forced them to experiment different machine.
many proposals provided to overcome this problem. But all these proposals requires a great manul strength to climb up the cocunut trees. Hence it make more challenging in climbing. All these proposals are not provide easiness and safely. It makes the person who climbs more fatigue. When these machine struck while climbing itr requires manul efforts to overcome the problem. Sometimes the person may kept for long at the top of the tree. Hence all these proposal are not fully satisfactory to farmers. Even the latest model is not fully effective, and could not provide easiness and safty. Hence these farmers are in now great turmoli.
considering the gravity of the above stated condition of cocunut farmers. All these problems are overcome by the present invention which provides easiness and safety. This invention proposes a machine for climbing up the cocunut trees to pluck the ripe cocunut and clean the tree top. So the farmers no need to rely on the cocunut climbing persons.
this invention also proposes a machine or device, as afore said which can be readily use by fastening to and unfastening from a tree by even skilled or unskilled persons- according to this invention,a machine for climbing up coconut trees or else other palm trees to pluck the coconut and to clean the tree top,comprises wheel,and folding type machine hands,which will help to positioning the machine firmly on the trunk. These wheels with drive and the machine hands together helps to encircle the machine to tree trunk. An engine,gear box,and the worm and pinion mechanism of springs will helps to move the device up with a man and after plucking the coconut,the machine can lower,even with one or twoo bunch of coconut on the machine.