Our Products
- Anasuya Automatic Plate Rolling Machine
- Anasuya Double Pinch Plate Rolling Machine
- Plate Rolling Machine 2500 X 10mm MS
- Anasuya Beairnwrk60 Mild Steel Plate Rolling Machine
- Roll Plate Bending Machine
- 3-Roll Plate Bending Machine
- Double Pinch Plate Rolling Machine
- Mechanical Plate Rolling Machine
- Hydraulic Roll Plate Bending Machine.
- Mechanical Roll Plate Bending Machine
- Plate Rolling Machine
Plate Rolling Machine
Anasuya Automatic Plate Rolling Machine
₹ 34,20,000/ PieceGet Latest Price
Product Brochure Watch Video
Type of Rolling Machine | Sheet Rolling Machine |
Production Capacity | 5 Ton/day |
Material | Mild Steel |
Automation Grade | Automatic |
Frequency | 50 Hz |
Phase | 3 Phase |
Power Source | Electric |
Voltage | 440 V |
Size | 3500 x 1500 x 2000mm (LxWxH) |
Features;
• Version : Hydraulic Double Pinch Plate Rolling Machine
Operational Data:
• Minimum Bending Diameter: : Top Roll Dia X 3 (Approx.)
• Contol : Touch Screen Electric Control Panel With Plc.
• Lubrication System: : Centralized Lubrication System
Drives:
• Main Drive Motor : 11-k.w. Hydraulic Power Pack Unit Motor
• Roll Drive : Hydro-motor With Planetary Gear Box at Both Bottom Rolls
• Planetary Gear Box Ratio : 1 : 80 (Approx.)
Standard Features / Accessories (Including / Supplied With Machine):-
• Main Drive Motor (Siemens / Crompton/ Abb -make)
• Hydraulic Power Pack Unit.(Valves & Pumps by Yuken / Polyhydron / Rexroth)
• Touch Screen Electric Control Panel Movable Work Station With Joy-sticks.
• Drive of Bottom Roll Through Individual Hydro-motor & Three Stage Planetary Gear Box.
• Hydraulically Operated Bottom Roll Pressing (Double Pinch)
• Frame Built of Laser Cut, High Strength Steel, Welded, M.s. Plates & Structural Steel.
• Hydraulic Drop-end.
• Mechanical Top Roll Balancing System.
• Bending Rolls Assembled on Heavy Duty Bearings.
• Centralized Lubrication With Automatic Timer Settings.
Main Structure and Working Principle :The Double Pinch Series is the Most Precise 3 Roll Machine in Its Category. The Design Reduces to a Minimum the Distance Between the Bending Points Guaranteeing Higher Bending Accuracy.the Ultra Wide Roll Support With Lubrication Circuit Are Mounted Over the Slides to Prevent Wear and Tear.the Very High Rotation Power is a Guarantee of the Machine, Superior Rolling Torque and Speed, Available Without Loss of Energy as Both Bottom Rolls Are Driven Independently by Hydro-motors/ Gearboxes Directly Coupled to the Rolls Shafts.
View Complete Details
Anasuya Double Pinch Plate Rolling Machine
₹ 64,35,000/ PieceGet Latest Price
Type of Rolling Machine | Sheet Rolling Machine |
Production Capacity | 1 Ton/day |
Material | Mild Steel |
Raw Material | Steel |
Automation Grade | Automatic |
Frequency | 50 Hz |
Phase | 3 Phase |
Voltage | 440 V |
Brand | Anasuya |
Double-pinch plate rolling machines offer more versatility and precision in bending, as they allow for pre-bending of the leading and trailing edges of the plate, and provide more control over the bending process. They may be preferred for bending thicker plates or when precise bending results are required.
View Complete Details
Automatic Grade | Semi-Automatic, Automatic, Manual |
Power | Hydraulic, Electric, Pneumatic, Mechanical |
Max Bending Radius | 200-250 mm, 150-200 mm, 100-150 mm, 0-50 mm, 50-100 mm |
Plate Dimensions (mm X mm X mm) | 1200 TO 5000mm |
Max Bending Angle (Degrees) | 360 |
Brand | ANASUYA |
• ANASUYA : HYDRAULIC DOUBLE PINCH PLATE ROLLING MACHINE
• BENDING CAPACITY : 2600 mm LENGTH X 10 mm THICK M.S. OR 8 mm THICK S.S.
• PRE-PINCH CAPACITY : 2600 mm LENGTH X 8 mm THICK M.S. OR 6 mm THICK S.S.
• TOP ROLL DIAMETER : 230 mm (+/- 4% TOLERANCE)
• BOTTOM ROLL DIAMETER : 210 mm (+/- 4% TOLERANCE)
• MATERIAL OF ROLL : E.N.:8/ Forge Steel / Steamer Shaft
• OVER ALL DIMESIONS : 4500 (L) X 1200 (W) X 1300 (H)mm (APPROX.)
• WEIGHT : 5000 KG (APPROX.)
OPERATIONAL DATA:
• ROLLING SPEED (APPROX.) : 1.5 TO 4 mtrs/min.
• MINIMUM BENDING
DIAMETER: : TOP ROLL DIA x 3 (APPROX.)
• CONTOL : TOUCH SCREEN ELECTRIC CONTROL PANEL WITH PLC.
• LUBRICATION SYSTEM: : CENTRALIZED LUBRICATION SYSTEM
DRIVES:
• MAIN DRIVE MOTOR : 7.5-K.W. HYDRAULIC POWER PACK UNIT MOTOR
• ROLL DRIVE : HYDRO-MOTOR WITH PLANETARY GEAR BOX AT BOTH
BOTTOM ROLLS
• PLANETARY GEAR BOX RATIO : 1 : 80 (APPROX.)
STANDARD FEATURES / ACCESSORIES (INCLUDING / supplied with machine):-
• Main Drive Motor (Siemens / Crompton/ ABB -make)
• Hydraulic Power Pack Unit.(Valves & Pumps By Yuken / Polyhydron / Rexroth)
• Touch Screen Electric Control Panel Movable work station with Joy-Sticks.
• Drive of Bottom Roll Through Individual Hydro-motor & Three Stage Planetary Gear Box.
• Hydraulically operated bottom roll Pressing (Double pinch)
• Frame built of laser cut, high strength steel, welded, M.S. plates & Structural Steel.
• Hydraulic drop-end.
• Mechanical top roll balancing system.
• Bending rolls assembled on heavy duty bearings.
• Centralized lubrication with automatic timer settings.
View Complete Details
Anasuya Beairnwrk60 Mild Steel Plate Rolling Machine
₹ 45,27,000/ PieceGet Latest Price
Product Brochure Watch Video
Type of Rolling Machine | Sheet Rolling Machine |
Production Capacity | 15 Ton/day |
Material | Mild Steel |
Raw Material | Mild Steel |
Automation Grade | Automatic |
Appearance Size | 3700 x 1600 x 2000mm (LxWxH) |
Frequency | 50 Hz |
Phase | 3 Phase |
• ANASUYA : HYDRAULIC DOUBLE PINCH PLATE ROLLING MACHINE• BENDING CAPACITY : 2600 mm LENGTH X 16 mm THICK M.S. OR 13 mm THICK S.S.• PRE-PINCH CAPACITY : 2600 mm LENGTH X 13 mm THICK M.S. OR 10 mm THICK S.S.• TOP ROLL DIAMETER : 300 mm (+/- 4% TOLERANCE)• BOTTOM ROLL DIAMETER : 270 mm (+/- 4% TOLERANCE)• MATERIAL OF ROLL : E.N.:8/ Forge Steel / Steamer Shaft• OVER ALL DIMESIONS : 4900 (L) X 1650 (W) X 1650 (H)mm (APPROX.)• WEIGHT : 7650 KG (APPROX.)
OPERATIONAL DATA:
• ROLLING SPEED (APPROX.) : 1.5 TO 4 mtrs/min.• MINIMUM BENDING DIAMETER: : TOP ROLL DIA x 3 (APPROX.)• CONTOL : TOUCH SCREEN ELECTRIC CONTROL PANEL WITH PLC.• LUBRICATION SYSTEM: : CENTRALIZED LUBRICATION SYSTEM
DRIVES:
• MAIN DRIVE MOTOR : 11-K.W. HYDRAULIC POWER PACK UNIT MOTOR• ROLL DRIVE : HYDRO-MOTOR WITH PLANETARY GEAR BOX AT BOTH BOTTOM ROLLS • PLANETARY GEAR BOX RATIO : 1 : 80 (APPROX.)
STANDARD FEATURES / ACCESSORIES (INCLUDING / supplied with machine):-
• Main Drive Motor (Siemens / Crompton/ ABB -make) • Hydraulic Power Pack Unit.(Valves & Pumps By Yuken / Polyhydron / Rexroth)• Touch Screen Electric Control Panel Movable work station with Joy-Sticks.• Drive of Bottom Roll Through Individual Hydro-motor & Three Stage Planetary Gear Box.• Hydraulically operated bottom roll Pressing (Double pinch) • Frame built of laser cut, high strength steel, welded, M.S. plates & Structural Steel.• Hydraulic drop-end. • Mechanical top roll balancing system.• Bending rolls assembled on heavy duty bearings.• Centralized lubrication with automatic timer settings.
MAIN STRUCTURE AND WORKING PRINCIPLE :
The Double Pinch series is the most precise 3 roll machine in its category. The design reduces to a minimum the distance between the bending points guaranteeing higher bending accuracy.The Ultra wide roll support with lubrication circuit are mounted over the slides to prevent wear and tear.The very high rotation power is a guarantee of the machine, superior rolling torque and speed, available without loss of energy as both bottom rolls are driven independently by hydro-motors/ gearboxes directly coupled to the rolls shafts.
View Complete Details
Usage/Application | Industrial |
Plate Dimensions (mm X mm X mm) | 2500 mm, 2500 x 6000 x 6mm (LxT) |
Max Bending Radius | 250mm |
Material | Mild Steel |
Automatic Grade | Automatic |
Power | Hydraulic |
Brand | Anasuya |
Automation Grade | Automatic |
Frequency | 50 Hz |
Anasuya - presents to you a range of most technically advanced 3-ROLL PLATE BENDING MACHINE with all latest features as per international standards.
Standard Features/Accessories:
The Double Pinch series is the most precise 3 roll machine in its category. The design reduces to a minimum the distance between the bending points guaranteeing higher bending accuracy.
The bearing system, incorporating 4 independent bearings for each bending roll is a standard feature of the DP. It guarantees higher reliability (higher capacity of load absorption) and increases the range for tilting the side rolls, resulting in more versatility, when rolling cones.
The Ultra wide roll support with lubrication circuit are mounted over the slides to prevent wear and tear.
Another important standard feature to increase the versatility of the machine is the roll shaft extensions to allow dies to be fitted to bend profile and pipe..
The very high rotation power is a guarantee of the DP superior rolling torque and speed, available without loss of energy as all three rolls are driven independently by hydro-motors and gearboxes directly coupled to the rolls shafts.
Bhagwati Engineers
View Complete Details
3-Roll Plate Bending Machine
₹ 3,75,000/ PieceGet Latest Price
Minimum Order Quantity: 1 Piece
Product Brochure Watch Video
Automatic Grade | Automatic, Manual, Semi-Automatic |
Power | Electric, Hydraulic, Mechanical |
Max Bending Radius | 0-50 mm |
Plate Dimensions (mm X mm X mm) | 2500 |
Max Bending Angle (Degrees) | 0TO180 |
Brand | ANASUYA |
We offer our customers with high quality 3-Roll Plate Bending Machines. These are made using best quality components and other raw material. These robustly manufactured machines are widely used in various applications and appreciated for superior results and robustness.
The standard accessories in which the machines are available include:
Main Drive Motor
Frame built of laser cut high strength steel, welded, stress relieved and sand blasted
Hydraulic pressing system on top roll
Hydraulic unit by Rexroth and valves by Aron
Screw jeck drop-end
Mechanical rolls parallelism
Bending rolls assembled on heavy duty SKF bearings
Centralized lubrication by means of a hand pump
Separate controls on control panel
Movable work station with pair of foot switch
Pair of lifting links
Safety devices and operating manual according to CE norms
The various optional accessories that are supplied by us on customer request include:
Hardened rolls to HRC 54-56
Automatic rolls parallelism by a micro processor
Tilting of the bending rolls by means of proportional valves and PLC
Top roll hydraulic balancing system
Variable speed
Section bending tools
Vertical hydraulic support max. Ø2500 mm/ 98” and max. weight 1600 Kg/ 3530 lbs
N.C. Operated Stroke control
First fill of hydraulic oil
The bending operation of the machines is as follows:
The Plate can be bent on machine by hammering as shown if the thickness of the plate is half than capacity
Thicker plates should be prevent outside the machine
Place the Plate between bottom and top rolls by adjusting top roll manually
Down the top roll and given pressure on the plate. Then start Main motor in clock wise direction till one end of the plate comes over first bottom roll Reverse the Motors and get second end on second bottom
Continue above process until you et desired shall as shown in picture.
View Complete Details
Double Pinch Plate Rolling Machine
₹ 15,50,000/ PieceGet Latest Price
Automatic Grade | Semi-Automatic, Manual, Automatic |
Rolled Shape | Tube, Round Bar, Wire |
Production Capacity | 6-10 ton/day, 10-15 ton/day, 1-3 ton/day, 3-6 ton/day |
Machine Type | Hot Rolling Mill, Cold Rolling Mill |
Max Rolling Speed (metres/min) | 1.5MTR/MIN |
Brand | ANASUYA |
ANASUYA' presents to you a range of most technically advanced 3-ROLL PLATE BENDING MACHINE with all latest features as per international standards.
The Double Pinch series is the most precise 3 roll machine in its category. The design reduces to a minimum the distance between the bending points guaranteeing higher bending accuracy.
The bearing system, incorporating 4 independent bearings for each bending roll is a standard feature of the DP. It guarantees higher reliability (higher capacity of load absorption) and increases the range for tilting the side rolls, resulting in more versatility, when rolling cones.
The Ultra wide roll support with lubrication circuit are mounted over the slides to prevent wear and tear.
Another important standard feature to increase the versatility of the machine is the roll shaft extensions to allow dies to be fitted to bend profile and pipe.
The very high rotation power is a guarantee of the DP superior rolling torque and speed, available without loss of energy as all three rolls are driven independently by hydro-motors and gearboxes directly coupled to the rolls shafts.
Wide Range of Machines
The standard range of 3-roll plate bending machines covers plate thicknesses from 3 mm (1/8”) to 100 mm (4”) and widths from 1 000 mm to 8 000 mm (3’ to 26’). All machines have unique features needed for high precision and versatility:
Prebending of both the leading and trailing edge. In many cases, the remaining fl at end is as short as one time the plate thickness.
Fully hydraulic, infinitely variable speed drive and adjustment of the rolls.
Highest drive torque of any competitive machine.
Frames made of high-strength steel, fully welded and stress relieved before machining to have sufficient strength to absorb bending forces and to achieve highest possible accuracy.
All purpose machine with wide working range.
Excellent for cone bending.
View Complete Details
Mechanical Plate Rolling Machine
₹ 3,75,000/ PieceGet Latest Price
Automatic Grade | Automatic, Semi-Automatic |
Rolled Shape | Tube, Round Bar, Rectangular Bar |
Production Capacity | 3-6 ton/day, 1-3 ton/day |
Machine Type | Hot Rolling Mill, Cold Rolling Mill |
Max Rolling Speed (metres/min) | 1.5 |
We provide our customers with superior range of Mechanical Plate Rolling Machines. These provide users with great functional values as they are known for their durability and output ability. Manufactured using premium quality material, these are used for a number of industrial applications.
The basic structure and working principle behind these Mechanical Plate Rolling Machines are as follows:
- This machine is manually operated and works on screw-nut principle.
- The pressing of top roll is driven by means of fine threaded screw provided at both the ends of TOP-roll by means of Tommy bar which is supplied with the machine
- The equipment composed of two parts - working parts and drive system
- The working parts is composed of right and left bearing plate, one upper roll, two down rolls (material of rolls is EN8 / Forge Steel / Steamer Shaft.), lifting screw and other accessory parts.
- Down rolls drive upper rolls to revolve. Upper rolls can adjust up/down by rotating screw at both the ends.
- Drive system is composed of main motor, main speed reducer gearbox and other accessory parts
- Down rolls are driven by main motor and main speed reducer gear, the spindle of main speed reducer drive two down rolls by one group gears, the direction adjusted by the main motor.
- Unloading device is used for bending circle type to remove the work piece.
- While unloading the upper rolls move to up limit position, the balance device on upper rolls ends hit upper rolls to remove the work pie
The main standard features of the product are:
- Main Drive Motor (Siemens / Crompton -make)
- Gear Box (Elecon –make)
- Drive of Bottom Roll Through Gear Box and Main motor Drive
- Manually operated Top Roll Pressing (vertical feeding) through 2-nos Tommy bar (supplied with machine)
- Roller for Bending Sections (angles, channels, etc)
- Frame built of laser cut high strength steel, welded, stress relieved and sand blasted
- Mechanical opening-end and top roll balancing system
- Bending rolls assembled on heavy duty Brass bush bearings
- Manual lubrication by means of Oil cups provided at lubricating points.
The bending operation of the machines is as follows:
- The Plate can be bent on machine by hammering as shown if the thickness of the plate is half than capacity
- Thicker plates should be prevent outside the machine
- Place the Plate between bottom and top rolls by adjusting top roll manually
- Down the top roll and given pressure on the plate
- Then start Main motor in clock wise direction till one end of the plate comes over first bottom roll Reverse the Motors and get second end on second bottom
- Continue above process until you get desired result.
View Complete Details
Hydraulic Roll Plate Bending Machine.
₹ 5,25,000/ PieceGet Latest Price
Minimum Order Quantity: 1 Piece
Automation Grade | Automatic, Semi-Automatic |
Max Bending Radius | 100-150 mm, 50-100 mm, 150-200 mm, 200-250 mm |
Max Bending Angle (Degrees) | ALL ANGLE |
Model | BE-A |
Brand | ANASUYA |
Hydraulic Roll Plate Bending Machine. ? The bearing system, incorporating 4 independent bearings for each bending roll is a standard feature of the DP. It guarantees higher reliability (higher capacity of load absorption) and increases the range for tilting the side rolls, resulting in more versatility, when rolling cones. ? The Ultra wide roll support with lubrication circuit are mounted over the slides to prevent wear and tear. ? Another important standard feature to increase the versatility of the machine is the roll shaft extensions to allow dies to be fitted to bend profile and pipe.. ? The very high rotation power is a guarantee of the DP superior rolling torque and speed, available without loss of energy as all three rolls are driven independently by hydro-motors and gearboxes directly coupled to the rolls shafts. Bhagwati Engineers
View Complete Details
Mechanical Roll Plate Bending Machine
₹ 3,75,000/ PieceGet Latest Price
Automatic Grade | Semi-Automatic, Manual, Automatic |
Power | Electric, Hydraulic, Mechanical |
Max Bending Radius | 0-50 mm, 150-200 mm |
Plate Dimensions (mm X mm X mm) | 2500 |
Max Bending Angle (Degrees) | ALL ANGLES 0-180 |
Brand | ANASUYA |
Mechanical Roll Plate Bending Machine ? The bearing system, incorporating 4 independent bearings for each bending roll is a standard feature of the DP. It guarantees higher reliability (higher capacity of load absorption) and increases the range for tilting the side rolls, resulting in more versatility, when rolling cones. ? The Ultra wide roll support with lubrication circuit are mounted over the slides to prevent wear and tear. ? Another important standard feature to increase the versatility of the machine is the roll shaft extensions to allow dies to be fitted to bend profile and pipe.. ? The very high rotation power is a guarantee of the DP superior rolling torque and speed, available without loss of energy as all three rolls are driven independently by hydro-motors and gearboxes directly coupled to the rolls shafts. Bhagwati Engineers
View Complete Details
Plate Rolling Machine
₹ 3,75,000/ PieceGet Latest Price
Automatic Grade | Automatic |
Brand | ANASUYA |
Capacity | 1000mm - 6000mm LENGTH , 2mm -100mm |
Model | BEA |
Plate Rolling Machine The bearing system, incorporating 4 independent bearings for each bending roll is a standard feature of the DP. It guarantees higher reliability (higher capacity of load absorption) and increases the range for tilting the side rolls, resulting in more versatility, when rolling cones. The Ultra wide roll support with lubrication circuit are mounted over the slides to prevent wear and tear. Another important standard feature to increase the versatility of the machine is the roll shaft extensions to allow dies to be fitted to bend profile and pipe.. The very high rotation power is a guarantee of the DP superior rolling torque and speed, available without loss of energy as all three rolls are driven independently by hydro-motors and gearboxes directly coupled to the rolls shafts. Bhagwati Engineers
View Complete Details
- Developed and Managed by IndiaMART InterMESH Limited