Our range of aluminum cast-in heaters are provided in plates or bent shapes. Provided with tubular type heating elements, the requisite watt density offers excellent surface contact and quick heat transfer. The application areas and specifications of this range is provided below:

• Max. watt density – 50 W/sq. inch
• Max. surface temperature – 300° C

Application

• Extrudes & presses of thermoplastic machinery
• Plates for rubber presses
• Packing machinery

The range of embedded strip heaters are provided with rectangular section heaters. Offered with compact MgO insulation, these heaters provide quick heating and durable performance. Our range is offered in following specifications:

• Max. watt density – 40 W/sq. inch
• Max. surface temperature – 650° C

Application

• Air Heating & external heating for tanks and vessels

We offer cartridge heaters, which are fabricated as per the varied requirements of the clients. These heaters can be provided in different diameters, lengths and supply voltages. We can also offer this range with or without thermocouples. Offered with a variety of terminal types, these heater materials depends upon the temperature requirement.

• Max. Watt density - 10 W to 160 W/sq. Inch
• Max. surface temp – 800° C
• Supply voltages - 12 to 460 Volts
• Terminal types - leads, screw type or pin type
• Heater materials - incoloy, inconel, stainless steel or brass

Application

• Heating of dies, moulds and packaging machines

We offer a wide range of tabular heaters, which are sheathed in incoloy and chrome steel tube. Our range is provided with MgO compacted heating elements. These heaters are offered in different sizes and shapes.

• Max. watt density – 40 W/sq. inch
• Max. surface temperature – 750° C

Application

• Industrial air heating applications
• Dies & moulds heating

We offer half sheathed ring heaters in eight convenient sizes. These heaters are provided with MgO insulated heating coil having terminal studs. Being enclosed from one side only, these heaters have less residual heat.

• Max. watt density – 58 W/sq. inch
• Max. surface temperature – 650° C

Application

• Heating of Dies, moulds, packaging machines, etc.
• Soft metal melting

We offer micro tubular coiled heaters, which comes with wide contact surfaces provide superior thermal conductivity towards the matter. The excellent construction results effective mechanical shocks. We also offer these heaters with brass or aluminum casting.

• Max. watt density – 95 W/sq. inch
• Max. surface temperature – 700° C or 1300° F

Application

• Heating of plastic injection nozzles
• Railway
• Aerospace
• Metalworking
• Chemical industry
• Glass & paper industry
• Food industry
• Packing & medical industry
• Automotive industry

We offer a range of ceramic sealed infrared heaters, which has special ceramic body. Offered with built-in thermocouple along with fixing clips facilitating easy installations, these heaters have medium wavelength radiation and emitting external surface.

We can offer our range in curved or flat shape with following specifications of sizes (in mm):

• 70 x 60 for 150 W
• 245 x 60 for 250 W to 1 KW
• 122 x 122 for 250 W to 1 KW
• 122 x 60 for 125 to 500 W

The other specifications are provided as follows:

• Max. watt density – 44 W/sq. inch
• Max. surface temperature – 800° C
• Wave length - 3 to 4 microns

Application

• Thermoforming & thermowelding machines
• Industrial drying
• Curing processes of various types
• Other applications where continuous heating is required

Our range of immersion heaters are provided in tubular types or rod types having sheath material. The sheath material helps in corrosion resistance caused by the liquid to be heated. We can offer our range in various sizes and rating as per varied requirements. In addition, we can also offer these heaters with flanges or screw type end connections with or without flameproof terminal cover. The other specifications are given as:

• Max. watt density – 60 W/sq. inch
• Max. surface temperature – 400° C

Application

• Suitable to heat various liquid such as water, oil, chemicals & acids

Features

• that automatically turns on itself after the cause has been settled (such as electric leakage, overload, lightning or malfunction)
• best option where there is no attendant (e.g big houses, offices, mobile phone, internet relay station, equipment & base station, atm equipment in bank, automatic circulation doors, billboards & neon sign advertisement panels, road (street) lamp, traffic signal lamp, radar basement of weather forecasting department, army facilities, cctv, aquarium, automatic selling slot machines, boilers facilities, dam (for generating water power), sewage treatment plant, railroad facilities, gas facilities, elevator, airport runway, express highway electrical light panel, national park, leisure & entertainment facilities (resorts & amusement parks).
• That will not switch on until the fault gets recovered.
• That will not switch on automatically if switched off manually.
• Available with two built in operations in case of earth leakage: With automatic on & manually on.
• Single (built-in) type (break / recovery)
• Good size & weight - fit to distribution board
• Size 55x95x60 mm
• Rated voltage: 220
• Rated current: 30amps
• Rated sensitivity leakage current: 30ma
• Automatic reset time: 10 & 60 sec
• Short circuit responses:<0.03 sec.
• Short circuited current: 1.5ka
• Installation method: screw / din-rail.
• Approvals: ce (europe), tuv-gs (germany), pse (japan), ks c 4613 & k 60947-2 (ek) (korea) keri test report-emc (emi+ems).

We offer a wide range of quartz infrared heating modules & panels, which are preferred in those applications where rapid heater response is required. Having medium wavelength radiation, this range comprises of series of quartz tube sheathed heating elements in steel enclosure.

Our range is provided in following modules (in mm) for a range of 150 to 1250 Watts:

• 248 x 62
• 125 x 62
• 62 x 62
• 125 x 125
• 248 x 117

The other specifications are given as:

• Max. watt density – 30 W/sq. inch
• Max. surface temperature – 870° C
• Wave length - 2.55 microns

Application

• Various industrial heating application such as drying, curing, softening, etc.

We offer a comprehensive range of short wave infrared heaters and modules, which are provided with tungsten filaments enclosed in quartz tube and provided with inert gas sealing having terminal leads at both the ends. The prominent features are given as:

• Max. watt density – 100 W/linear inch
• Max. surface temperature – up to 1500° C
• Wave length - 1.16 microns

Application

• High speed heating, drying and softening

We offer a wide range of temperature sensors, which includes thermocouples and thermal-resistances having MgO insulation along with grounded or ungrounded junctions. In addition, we cal also provide various shapes and fittings as per the client's specific requirements.

Application

• Measuring of temperature through electronic temperature controller indicator