|
PVC Dip Mouldings
|
We have been successful in achieving the individual identity in the market as the prominent manufacturer and exporter of the PVC Dip Mouldings, PVC Caps, Shrouds, Handle Cable End Caps, PVC Shrouds and many other assortments. Our range of gamut is known for its resistant to UV, ozone rays and his excellent electrical and thermal properties.It is manufactured in accordance of requisite norms and standards. Our range comprises of:
|
 
PVC Bellow We manufacture PVC bellow which is manufactured from PVC or the polyurethane and is suitable for the applications which requires the water tight construction. These bellows have good temperature and oil resistant quality. It has also excellent abrasion resistant quality and these are available in standard sizes. These are manufactured in accordance of requisite norms and standards and it is delivered within given time frame.
It is highly resistant to:
- Oil
- Grease
- Cutting Fluids
- Fuel Oil
|  |
| Industrial Bellow These industrial bellows are used to
protect gear rod in automobile from dirt and dust. These are used for
electrical insulation and for protection against corrosion. Its important
feature. Features :
- Soft
- Flexible
- Have a glossy finish with excellent compression & expansion
capabilities
- Low priced alternative for you industry requirements.
- Trifurcating gloves for XLPE cables
- Provides significant
reduction in air clearances.
- Excellent electrical
and thermal properties.
- Highly resistant to
UV rays and Ozone. Good for outdoor or indoor applications.
- Customized design
possible as per end application. New design moulds can be
developed in a week
|
PVC Caps As the largest manufacturer of PVC caps in the
world, has the most extensive line of PVC
caps, plugs, flange covers, and masking products available.
Of course, this broad line of products evolved due
to the special advantages that PVC caps and plugs
have over most hard plastic closures. Here are some
of the most common reasons people choose to use PVC
when specifying everything from dust caps to plastic closures
- PVC is a flexible material. When used as the
material for a cap or plug, it provides a much better
seal and will not crack or shred like hard plastic
closures.
- For threaded applications, PVC caps and plugs
will not shred and leave residue in the very part
that they are trying to protect from dust or other contaminants.
- PVC can be made in more vibrant colors.
- The flexibility of PVC caps makes them easy
to install while the airtight seal that they provide
keeps them in place once they are on.
- PVC withstands high temperatures and can often
be used as an alternative to more expensive rubber
caps in paint masking applications.
- PVC has a greater chemical resistance than
most other plastics making it the perfect cap material
for plating applications.
- PVC is a naturally insulative material making
these caps and plugs the ideal choice for closures
that are going to be used in electrical applications.
- Due to the unique molding process used to make
PVC caps, engineers can specify caps in
almost any length without incurring tooling charges.
- PVC formulations can be made to achieve a wide
variety of textures and chemical properties.
| |
| PVC Shrouds PVC Shrouds are flexible, reusable electrical insulating covers for cable. These
pliable Shrouds or boots can be installed, removed or replaced in few
minutes. Made from polyvinyl chloride material (PVC), it is formulated
specially for electrical applications at high voltages.
Features :
- Trifurcating gloves for XLPE cables
- Provides
significant reduction in air clearences.
- Excellent
electrical and thermal properties.
- Highly
resistant to UV rays and Ozone.Good for outdoor or indoor applications.
- Customised
design possible as per end application.
- New
design moulds can be developed in a week.
|
PVC Bush Bar Shrouds We offer PVC Bush Bar Insulation Shrouds and Boots which are known for its effectual working among our valued clients. These are flexible, reusable electrical insulating covers which are used for bus and switchgear connections. It can be easily installed, replaced and removed within few minutes. Theses are manufactured from high quality of polyvinyl chloride material (PVC) and is formulated for electrical applications at the high voltage.
It has following noteworthy features:
- Excellent electrical and thermal properties.
- Highly resistant to UV rays and Ozone. Good for outdoor or indoor applications.
- Customized design possible as per end application.
- New design moulds can be developed in a week.
- Suitable for insulating bus bar joint works applications (Tees, Elbows etc.)
- Provides significant reduction in air clearances.
- Special buttons makes it quick to install, remove or replace during maintenance
| |
| Cable Gland Shrouds We are engaged in manufacturing PVC cable gland shrounds which are flexible, reusable electrical insulating covers which is used for the cable gland connections. Manufactured from high quality of the polyvinyl chloride material, with the thickness of 2 mm and is formulated specially for the electrical application at the high voltages. It can be easily installed, removed and is replaced within few minutes.It is available in following sizes:
- BW Cable Gland
- CW Cable Gland
- CCG Cable Gland
|
LSF Cable Gland Shrouds We are engaged in manufacturing LSF cable gland shrouds which is manufactured for the electrical application at the high voltage. It is manufactured from high quality of raw material which is in compliance of necessary standards. Timely delivery of our product is an added advantage for our clients. It has following features:
- High Durability
- Resistant To Wear And Tear
- Low Maintenance Cost
| |
| Dip Mouldings We manufacture dip mouldings which are known for its effective functioning among our valued clients. These are most appropriate for the short and the long production run and have
the lower startup tooling cost as compared to the regular injection moulding. The fully functional prototypes can be provide before investing in the full
production tooling a and has the dip moulding process which erases the parting
lines, mould marks and flash from the finished plastic parts.
|
Vinyl Coating We are engaged in manufacturing
PVC vinyl coating which helps in protecting the surface of the metal from the
corrosion and from the dirt and dust in the environment. This dip coating also helps in the protecting
from electrical shock and damage. This helps in providing a shiny and the
glossy look to the complete structure. It is also used for the insulation of
the metal part and is manufactured in accordance of requisite norms and
standards.
| |
| Insulation Sleeves We manufacture insulation sleeves which are manufactured from high quality of raw material. The raw material comprises of PVC which provides the extra insulation which help in the protection of the wire. It is extensively used in wire harness, cable and battry industry. It is manufactured in accordance of requisite norms and standards and is delivered within stipulated time frame.
Some of its technical specifications are as follows:
- Provides extra insulation and protection on wire
- Material: PVC
- Color : Clear blue
- Available in different colors
- Special quantity packing available
|
Coupler Covers We offer coupler covers which are
known for its effective functioning among our valued clients. It is
manufactured from high quality of raw material which is procured from genuine
vendors. These covers are primarily used in the wiring harness of the two
wheelers. It is manufactured in accordance of requisite norms and standards.
| |
| Tool Handles We are engaged in manufacturing grips or tools handles which are highly durable and offered good comfort through the flexibility.It can be made in glossy, matt and the foam finish in various colors according to client requirement. It is manufactured in accordance of necessary standards and can be delivered within given time frame.
These are widely used in:
- Automobile
- Industrial
- Sports/ Gym Equipment
|
|
© Bharat Ind. All Rights Reserved (Terms of Use)