Compatible with 3-wired Pt.100/DIN and JIS standard type - Self-diagnostic function detecting sensor's breakdown per channel - High accuracy (less than 0.3% of full scale) ¤ Must be used with SPC or SP2B power module
Model
CM1-RD04A
CM1-RD04B
Available RTD
Pt100 (JIS C1640-1989, DIN 43760-1980)
Pt1000 (DIN EN 60751) Ni1000 (Din43760)
JPt100 (KS C1603-1991, JIS C1604-1981)
Range of InputTemperatures
Pt100 : -200.0°C to 600°C (18.48 to 313.59 Ohm)
Pt1000 : -200.0°C to 600°C (184.8 to 3135.9 Ohm) Ni1000 : -60.0°C to 150°C (695.2 to 1986.3 Ohm)
JPt100 : -200.0°C to 600°C(17.14 to 317.28 Ohm)
Digital Output
Digitally Converted Value: 0 ~ 16,000 Detected Temperature Value: -2000 ~ 6000(Value of the first decimal place*10)
Redundancy for a CPU module, Power modules, Base and Communication modules is available
CPU redundancy system is composed of separate bases for ideal redundancy structure In case an error occurs in an active CPU module, a back up module is automatically converted to active one for continuous operation
Furnishes a test button to check and maintain a system easily
Direct input from temperature sensor's eliminates the external transducer - Thermocouple sensors compatible with K-J-E-T- B -R-S - type - Self-diagnostic function detecting sensor's breakdown per channel - Cold junction compensation is also equipped (automatic) - Acceptable for worldwide standard as ANSI, DIN, BS, JIS and KS ¤ Must be used with SPC or SP2B power module
Model
CM1-TC04A
Available TC
Type K, J, E, T, B, R, S
Range of Input Temperatures
Type of TC
Standard
Range of Measured Temperatutes( )
Range of Measured Voltage
K
ANSI DIN BS JIS KS
-200.0~1200.0
-5891~48828
J
-200.0~800.0
-7890~45498
E
-150.0~600.0
-7297~45085
T
-200.0~400.0
-5602~20869
B
400.0~1800.0
786~13585
R
0.0~1750.0
0~21006
S
0.0~1750.0
0~18612
Digital Output
Digitally Converted Value: 0 ~ 16,000, Converted Temperature Value: (Range of Measured Temperature*10)
Compensation Type
Automatic Compensation
Breakdown Detection
Detection by Channels
Precision
±0.3%(Full Scale) +1oC(error for base contact compensation)
- Max. 8 channel NTC thermistor with one module - Possible to measure NTC (Negative Temperature Coefficient) type Thermistor - Temperature data accuracy of one decimal place. - For each channel, this unit could detect any thermistor's single line input and assuming oversetting of input. - In the use of the Thermistor temperature-resistance table, it is able to input desired maximum, medium and minimum temperature(C) point and Resistance (Q) to measure.
Kamala Electrical Supplier of electrical component like electrical switches, fuses, control panels, modular case circuit boards, power cables, switch disconnector fuses, on load change over switches, double brake fuse switches, DMC fuse switches, RCCB and metal clad plugs.
Mapro Trading Company Supplier of electronic board like industrial electronic boards, siemens electronic boards, minigard distribution boards, betagard distribution boards, betagard miniature circuit brakers and betagard residual circuit braker operators.
Processing...
