We provide an extensive assortment of online drip irrigation systems that are fabricated using superior quality raw material and are appreciated by our customers for their excellent performance and durability. Moreover, these drip irrigation systems can also be customized as per the exact requirements of our clients.

1) Laterals :

• Available in 12mm and 16 mm outside diameter with 1-1.3mm wall thickness conforming to IS specification.
• Manufactured from virgin LLDPE material with black master batch additives of the highest standards to give the best UV resistance.
• Available with antirodent additives using bifferant which is not harmful but prevents rodents from biting.

2) Drippers :

Openable Turbo Type :

• Non pressure compensating.
• Available in 4 and 8 Iph discharge with ISI Mark.
• Each dripper is individually factory tested for discharge to give the best uniformity.
• The material used is of best quality for complete UV stability and life.
• Also available in pressure compensating 4 Iph discharge.

J- Type :

• Cost effective.
• Can be easily opened and cleaned.
• Particularly used where there is too much of salt in the water.
• Available in 4, 6, 8, 12 Iph discharge.

Eden Type :

• Pressure compensating with no drain non openable drippers.
• Imported and specially used for applications where very high uniformity is required and all the drippers are required to start at one time.
• Available in 2 and 4 lph.

New PCND Dripper :

• Have been developed by us recently and are offered at prices at par with regular drippers in the market.
• all plants at any length or level would get the same quantity of water with the help of these drippers.
• Microtubes available in 1 .2, 1 .3, 1.5 and 4mm in LLDPE virgin material.

Available with us is a premium range of micro irrigation kits that are primarily of two types, Bucket Kit and Drum Kit. Manufactured using premium quality raw material, these micro irrigation kits can be customized as per the specific requirements of the clients and offer reliable performance.

1) Bucket Kit :

• A pre-assembled and packaged kit used for kitchen gardens to grow vegetables for home consumption.
• Comprises a 20 liter bucket with one or two rows of lateral pipes of 5 to 10 meter length depending on the space available.
• Can irrigate up to 20 m² of area.
• Can be hung from a tree or pole at a 1 meter height.
• Very popular with NGO s for promoting the upliftment of the marginal farmers.

2) Drum Kit :

• A pre-assembled and packaged kit useful for cultivating small commercial vegetable gardens.
• In a minimum area of 100 m², the drum kit comprises a 200 liters water storage viz. drum, barrel, tank, etc. placed at an average height of 1 meter to allow the water to flow by gravity.
• 5 or more rows of lateral pipes 10 to 20 meters long depending on crop spacing and shape of the plot.
• The irrigated area can be expanded up to 1000 m² by using a larger sized drum placed at an average height of 1 to 1.5 m.
• Also available custom built micro sprinkler and Mini sprinkler kits for 200-1000 sq meters and Micro-irrigation kits upto 1000sq meters with flat 2 LLDPE Mainlines.
• Popular with non government organizations working all over the world for the upliftment of the poor marginal farmers.

Manufactured using superior quality raw material our range of irrigation sprinklers is used when complete area is to be covered perfectly without causing any harm to the crop/plants. Customized as per the specifications of our clients, these irrigation sprinklers possess quality features.

1) Microsprinkler :

• Fabricated using polyacetal resin.
• Each Microsprinkler assembly consist of microsprinkler with 1 meter of 4mm tubing and 4mm connector which can go into the 12 or 16mm lateral.
• Special holding stakes to hold the assembly firmly also available as an optional item.
• Covers a radius of over 3mtrs at a 1 .2kg/cm2pressure of water in the lateral giving a discharge of 7olph.with a 90% uniform coverage of water.
• Higher coverage at minimum pressure.
• Microsprinklers should be installed at 4mtrs intervals on 16mmlaterals with the maximum of 7 microsprinklers per lateral.
• The laterals should also be put at every 4mtrs.
• Very uniform wetting of the entire area is achieved- hence better and higher yields- pays you back with increased profits in 1st year itself.
• Available at the most reasonable cost and hence have all the advantages over the conventional sprinkler system.
• Highly affordable.
• Necessary to cover entire area, like ginger, safed mush, onions, etc. and all vegetable plantations and nurseries.

 
2) Midispinkler :

• Used particularly for plantation with a height of above 2ft.
• These are the only ones which give best uniformity at the ht of 2.5-3ft.
• Operates at only 1.5kg/cm^3 pressure.
• It covers a radius of over 4mtrs, giving 100 LPH discharge with a
• 90% uniform coverage of water to be installed at a ht of 2.5 ft
• Available with 12mm adaptor connector for low cost.
• Also with 2.5 ft stake having 12/16mm connector.
• All components made up off tough engineering plastics hence more durable & unbreakable.
• Can be used for all types of crops like ginger, onion, shatavari, vegetables & nurseries.
• Very economical and effective for stevia etc.
• To be installed at 5mtrs X 5mtrs maximum 5nos for 16mm lateral and 3 numbers for 12mm lateral.
• Easy to disassemble & clean.

3) Minisprinkler :

• Used where complete area is to be covered perfectly without causing any harm to the crop/plants.
• Minisprinklers are made from the best quality polyacetal resin to give the maximum life.
• Each Minisprinkler assembly consist of mini sprinkler rotating head which is fifed to stake having 12mm/i 6mm connector for connecting directly to the 12/16mm lateral.
• Covers a radius of over 6 meters at a 2kg/cm2 pressure of water in the lateral giving a discharge of 300 lph. with a 90% uniform coverage of water.
• Installed at 7mtrs intervals on 16mm laterals with ideally 2 (maximum 3) minisprinklers per lateral.
• The laterals should also be put at every 7mtrs.
• Very uniform wetting of the entire area is achieved- hence belier and higher yields- pays you back with increased profits in 1st year itself.
• Best uniformity–hence substantial saving of water.
• Highly affordable.

We have been offering a wide range of irrigation sprayers and foggers that are widely used where complete area is to be irrigated as well as certain level of humidity/coolness is required for the tender plants. Fabricated using superior quality polyacetal resin, these irrigation sprayers and foggers are offered with maximum life and are easy to assemble and dismantle. Easy to clean, these irrigation sprayers and foggers are fitted with nozzles which are replaceable.

Features :

• Each Microsprayer assembly consist of microsprayer with 0.3 - 1 meter of 4mm tubing and 4mm connector which can go into the 12 or 16mm lateral.
• Special holding stakes to hold the assembly firmly available as an optional item.
• These microsprayers can cover a radius of over 1 meter at a 2kg/cm2 pressure of water in the lateral, giving a discharge of 40 lph.
• Microspayers should be installed at 1 meters intervals on 16mm laterals with the maximum of 12 microsprinklers per lateral
• Used in combination.
• Available in 4way, 2way mid single way with antileak.
• Single fogger without antileak for irrigation as well microclimate application.
• Operates at low pressure of 1 .5kg/cm2.
• Operating pressure range- 1 .5- 2.5 kg/cms2.
• Can be mounted on 16mm drip laterals.
• Comes with a no drain valve which opens only at 1 kg/cm2 pressure.
• Easy to dissemble and clean.
• All components made out of the best engineering plastics.
• Nozzle size 0.5mm.
• Droplet size-80-100 micron.
• Emission rate 7.5 lph at 2 kg/cm2 from each nozzle.
• Best for polyhouses/greenhouses.
• Can be used with our special antirodent laterals for poultry sheds at lowest pricings.

We have been manufacturing a wide range of special purpose irrigation valves that are widely used in irrigation sector. Customized as per the specifications of our clients, these irrigation valves are available as :

Air Release Valves :

• While using air valves air which is generally trapped with in the outlets always goes into the system.
• Pump system breathers through air valves which are installed at  strategic locations.
• Must when the drip system operates directly from a bore well pump, any pump or water source which is beyond 2 meters below the system and where ever the land is sloppy.
• Recommended positions are just after the filter, at beginning of slopes.

Non Return Valves (NRV) :

• Available in 63mm and 75mm sizes.
• Must when two or more pump are required to run parallel.
• Used when the entire water in the system tend to drain at the last drippers / outlets.

Pressure Release Cum Reducing Valves :

Particularly necessary when the system is to be operated in shifts. In case all the cocks are inadvertently shut when switching for one plot to another, there is sudden surge of pressure in the system which not only damages the pump but tends to burst the PVC pipeline. This is avoided if pressure release valve in installed The release pressure can be adjusted. In this from 1.5-3.0 kgs/ cm2 and as soon as this exceed it releases the water.

• Valve also be used as pressure reducing valve.
• Used in heavy slopes where the head generated is very high.
• The release end can be extended ahead with the lower differential pressure.
• Made in composite metal.
• Inserts and with engineering plastic with chrome plated compression springs for everlasting performance.
• Very affordable.

We have been manufacturing a wide range of drip connectors that are customized as per the specifications of our clients. Available with us is a wide range of drip connectors which are required for drip systems and possess following specifications :

• Tees with many combinations
• Microtees specially for using microtubes
• Holding pegs for puffing the outlets of microtubes in place
• Special connectors for integrated drip lines

Our clients can avail from us a unique gamut of integrated drip lines that are widely used across various parts of the world and can be customized to suit the unique requirements of our clients. These integrated drip lines are available at industry leading prices and are reckoned for their excellent performance and reliability.

1) Adriline :

Applications :

• Used for irrigating row crops, fresh vegetables, potatoes, vineyards, orchards and greenhouse applications.
• Ideal for long irrigation laterals particularly in cotton, banana and sugar cane plantations.

Main Features :

• Contains a turbulent flow emitter inseparably welded to the inside wall of the tube at different spacing.
• Its Labyrinth type emitter features a self-cleaning built-in strainer at its inlet.
• Its jointless design guarantees longer lateral lengths with uniform emission.
• Easy mechanical installation and recovery irregardless of crop density.
• Multi outlet emitter for a more uniform water distribution.
• Easily buried underground when produced with a special root repellent material that protects it from the closing typically caused by roots.
• Easy roll-up, storage and re-use season after season.

Technical Features :

• Adriline is produced in two different diameters mainly 16 and 20mm at a thickness of 1.0mm for both types.
• Two nominal discharge rates, mainly 1.6 LPH and 3.9 LPH for the 16mm diameter, and the 1.8 LPH and 3.8 LPH for the 20mm diameter, are available.
• Emitter spacing is available starting from 20cm up to 100cm at any interval.
• The pipe is produced using a mix of LDPE and LLDPE extrusion grade material. The emitter is produced of LLDPE injection grade.
• Recommended filtration is 120 mesh, using a screen or disc filter.

2) Adritape 30/25 :

Applications :

• Used for irrigating all types of vegetables, strawberries and crops with underground irrigation requirements.
• Particularly useful in irrigation of cotton, banana plantations, sugar cane, corn and fodder crops due to the long irrigation lateral lengths that can be applied at low investment cost.

Main Features :

• A light tape featuring a continuous wide labyrinth strip forming the emitter that is inseparably welded to the pipe's upper wall.
• Unlike most tapes, which are formed from a sheet of plastic, welded at the emitter peripheries, it features a complete extruded pipe.
• Limited clogging due to the self-filtration at the emitter inlet and its relatively wide labyrinth path. Its turbulent passage helps keep contaminants in suspension.
• No welding joints between the pipe and the internal strip, allowing the system to withstand higher working pressure.
• Extra longitudinal strength of the pipe due to the continuous internal strip.
• Standard short emitter outlet spacing (three to ten per meter) offering a complete uniform wetting zone along its length at no extra cost.
• Low pressure drop due to the flow rate per outlet, allowing longer laterals.
• Used in underground applications when produced with a special root repellent material that protects it from the clogging typically caused by roots.
• Easy to install using simple automatic coiling machines.
• Used for one season or more depending on the pipe thickness.
• A low cost high return irrigation system.

Technical Features :

• Adritape is produced in different thickness, mainly 8mil (0.2mm), 10mil (0.25mm), and 12mil (0.3mm).
• The emitter spacing is produced in lengths of 10cm, 20cm or 30cm.
• The mean flow rate of the emitter.

The "Ecoflo" Plastic Treadle Pumps provided by us has been developed and patented under patent registration no: 210928 dated 3-12-07. Treadle pumps have been in use since many years but only in improvised forms. The basic treadle pump comprises two metal cylinders with pistons that are operated by a natural walking motion on two treadles. The treadle pumps are ideal for manually irrigating small land holdings of one hectare or less and have many advantages over motorized pumps. Some of the advantages are :

• Lack of fuel cost and negligible maintenance makes it cost-effective.
• Can be used in inaccessible and remote places with no electricity, and located near any water source.

The range of Ecoflo treadle pumps developed and patented by us works on the same principle of reciprocating suction pump and has the following significant features :

• The pump manifold and fittings, cylinders and pistons are all made from injection molded engineering durable thermoplastic with close tolerances and with every component designed with ribs and reinforced sections to meet the most stringent conditions of wear and tear.
• The whole unit including the fabricated structure is portably designed in such a way that it weighs just 12kgs so a person weighing 60 kg should easily carry the unit, then should be able to suck upto 5000lph water from upto 7mtrs depth and pump it to a level upto 15mtr, a pressure enough to run a drip /sprinkler irrigation system or to transfer water to long distances upto 500mtrs.
• The pump has a metal frame structure to support the thermoplastic “Cylinder-Piston manifold block assembly” in the firm position. The hollow steel powder coated frame structure is designed in such a manner that the plastic molded assembly doesn’t require to be bolted or fixed. It is secured perfectly in place protected from mechanical strains.
• The piston design and the mounting of the rubber gaskets are aimed to get minimum frictional losses.
• The one and the only pressure treadle pump of its kind. The only alternate solution to electric pump.
• No operating cost. Simple & effortless pedaling/stepping motion.
• Very efficient design to give best results with minimum muscle power.
• Available in 1.5” & 2” nipples for connecting the inlet & outlet pipes.
• Water from nearby natural sources like rivers, lakes, ponds etc can be brought and stored for irrigation by means of The Ecoflo Treadle pump into simple manmade reservoirs with simple and low cost pond liners.
• Optional Standard Accessories include suction pipe (50mm dia) - 7mtrs with specially developed foot valve and 25mtrs PE delivery pipe roll.

We offer our clients a wide range of "Ecoflo" Plastic Treadle Pump Accessories that are especially designed for using the Ecoflo pump in an effective manner. The treadle pump accessories developed by us include the following :

1) Delivery Pipe and Nipple :

• Delivery pipe made in premium quality UV stabilized LLDPE.
• Pipe -50mm dia.
• Pipe fits perfectly onto the threaded outlet nipple of the pump.
• Larger diameter required to get the minimum frictional losses. At the same time the thickness is just around 1mm to make it flat and rollable and also to make it affordable to the marginal farmers.
• 50mm joiners developed for this pipe (straight connector for joining 2 pipes).
• 16mm Tee connectors developed to fit onto this pipe so that 16mm lateral be taken out on either side.

2) The Suction Pipe and Outlet Nipple :

• A special threaded nipple in plastic developed as a  standard accessory of the pump for connecting the suction pipe.
  

3) The Foot Valve With Nipple :

• Foot valve specially developed for this pump fabricated in tough UV stabilized black PPCopolymer for long life with provision to fit the same outlet threaded nipple and suction pipe as mentioned above.

4) Mini Sprinkler Systems :

• Developed 8-10 years back.
• Long lasting with uniform coverage of water.
• Require relatively higher pressure of 1.5-2kgs/cm2 and hence could not be used effectively by marginal farmers.
• With the use of the Ecoflo pump and the outlet/delivery pipe with the 16mm connectors and laterals-2 mini sprinklers can be easily operated on every 16mm lateral coming out forming a system of 9.
• Mini sprinklers directly operating from Ecoflo pump and uniformly wetting an area of 300 sq meters at a time.
• Shiftable system.
• light weight.
• Portable hence a larger area of upto 1 hectare can be irrigated.

5) Microirrigation Drip Kits :

• Used for transferring the water to a drum /tank at a higher level.
• Thin walled 17mm tubings.
• Regular 12mm /16mm drip laterals with micro tubes etc. covering 20 sq meters area to 1000sqmtrs area.
• Micro sprinkler kits available with these kits.

Precisely engineered, our range of fertigation systems is in wide demand across the globe. These fertigation systems are fabricated in accordance with the specifications of our clients and possess following specifications :

• Fertigation tanks are available in 40 liters, 60 liters, 120 liters and 180 liters capacity.
• Convenient for mixing and giving liquid fertilizers.
• Ventury Injectors easiest way to give acid treatment and ferligation.

We manufacture a range of low cost water storage equipment that are equipped with latest technological advancements. Precisely engineered, these water storage equipment are high on performance and are an excellent option for :

1) Rainwater Harvesting :

• Simple dug up tanks lined with specially developed plastic sheets -pond liners to easily collect and store rain water.
• Operational cost of around Rs.0.20 per liter.
• Durable, depending upon the thickness of the liners.
• Liners available in different sizes as per the tank capacities.

2) Transportation of Water :

• The water storage reservoirs can store water for irrigation collected from natural sources like rivers, lakes, ponds etc.
• Portable.
• Pumps water to a distance of upto 500mtrs through pipes of trenches
• Collects the water in the reservoirs for further using the water effectively by micro irrigation.

3) Using the Water for Micro Irrigation :

Different types of micro irrigation kits used for irrigating the small farms are mentioned below :

• Bucket kit for growing vegetables in an area of 20 sq meters.
• Drumkit for growing vegetables in an area of 100-200sq meters.
• Horticulture Drum kit for growing horticulture crops in an area of upto 1250 sq meters.
• Mini sprinkler/micro sprinkler kits for directly connecting to the Ecoflo Treadle pump to irrigate vegetable plots of 300sq meters area at a time on a shiftable basis to cover an area of upto 2000sq meters.

Manufactured in accordance with the specifications of our clients our range of filtration systems is in wide demand across the globe. Complying with various industrial standards, these filtration systems are manufactured using superior quality raw material.

Features :

• Complete Range Of Plastic Screen Filters 12mm 16mm ¾ 1 2 inlet and outlet from 240lph capacity to 20000lph capacity.

Highlights :

• Filters made from durable reinforced polyproplene with exceptional UV resistance.
• 10mtrs. 3 filters with 2 inlet and outlet comes with a opening spanner for easy opening and cleaning.
• The flow of water is from inside to the outside of the filter stainless steel mesh element. Hence cleaning of the clogged particles from outside on the screen is very easy.
• Just holding the element under a tap cleans the clog.
• Provision for flush valve is there for easy flushing of the filtered matter. This feature is non existant in the conventional metal filters.
• 20mtr 3 Filter with 2 inlet and outlet is the ultimate and best filter available in the market because of all the above advantages
• It has a robust strong body that can sustain the wear and tear during the cleaning operations.
• For higher volumes of filtration requirement it is advisable to have the above 20000lph capacity filters in parallel (battery of filters) with independent or single central flushing system. This proves more economical and handy than having single larger filters.
• All spares particularly filter elements available at reasonable cost.
• Very reasonably priced - costing is less than the conventional metal filters.
• Plastic screen filter - 16mm, 3/4', 1 3 mtr/5mtr>3- are specially developed for smaller applications including landscape
• Very affordable.
• Can be use even for the household applications.
• Metal screen filters are available with ISI mark from 5mtr3 to 40 mtr3 capacity.
• All metal filters are adequately powder coated and painted from inside with corrosion resistant paint to give long life.
• Sand filters are specially used where the water is from open well, canals, or reservoirs.
• Since these are very easy to flush and clean , we strongly recommend using for any irrigation system above 5 acres area.
• Sand filters are available in 20, 30 and 4Omtr3 m capacity.
• AJl sand filters are adequately powder coated outside and painted from inside with corrosion resistant paint to give long life.
• These come with flange type polyprop1ene heavy duly ball valves.