Bimal Pharma Private Limited

1.  NOMENCLATURE                   

:2,4-Hexadienoic acid, potassium salt.

:Potassium 2,4-hexadienate.

:Sorbistat-K.

:Sorbistat-potassium .

2.  CAS  NO.:   590-00-1 / 24634-61-5

3.  EMPIRICAL FORMULA  :C₆H₇KO₂                               

4.  MOL. WT.  :  150.2

5.  DESCRIPTION :White or Off- white granular or powder.

:        Slight characteristic odor.

6.  SOLUBILITY :Very soluble in water, slightly soluble In  Alcohol.

8.  HEAVY METALS: 10 ppm Max.

9.  PH (Acidity or Alkalinity):NMT 0.25 ml. of 0.1M NaOH or

0.1 M HCL is  required.                  

10. FREE ALKALI :NMT 1%.

11.    ARSENIC (AS As):  Max. 3 ppm .

12.    WATER CONTENT (Loss on Drying)   : Max. 1.0%

13.    ALDEHYDES AS Formaldehyde. :    Max. 0.1%

14.    LEAD CONTENT:2 ppm Max.  (2 mg. /Kg. Max.)

15.    MERCURY :1 ppm Max. (1 mg/ Kg. Max.)

16.    LIGHT STABILITY :No change in color after an hour

          exposure  to light.

15.    POTASSIUM SORBATE CONTENT    :99.0% - 101.0%

16.    PACKING : 25 Kgs.  LD Polythene Bag (800 guage)  with double LDPE  Liners.

1. Description :a white or almost white,

crystalline powder.

:slight characteristic odour.

2. Solubility :slightly soluble in water;

freely soluble in alcohol and in ether.

3. Melting point  :132 deg. C to 136 degc.

4. Heavy metals (as pb): 10 ppm max

5. Residue on ignition :0. 2% max.

6. Arsenic (as as)  :2 ppm max.

7. Aldehydes as formaldehyde  :    0. 1% max.

8.   mercury:1 mg. / kg. Max

(1 ppm max. )

9.   water content:0. 5% max

10. Heat stability             :no change in color after heating for 90 minutes at 105 degc

11. Sorbic acid content :99. 0% -101. 0%

12. Packing:25 kgs.   ld polythene bag (800 guage)  with double ldpe  liners.

1.      DESCRIPTION :A White to Off-White Crystalline Powder . 

2.      SOLUBILITY                     

          :Freely soluble in Water, Methanol and Ethanol, and is slightly soluble in EthyAcetate.                                            

3.      CLARITY AND COLOR  OF SOLUTION

  :  1.0 gm,. Solution in 10 ml. water is Clear. 

4.      SPECIFIC ROTATION  (At 20°C of 1% Sol. in water)

 : Bet. + 84.0° to 87.5° on Anhy. Basis.       

5.    WATER CONTENT (BY KF)

  : Max. 2.0%        

6.  pH  (2.0 gm., in 20 ml. Water.)

        : 3.0 to 6.0

7.      HEAVY METALS: NMT 0.001%   (10 ppm)

8.   ARSENIC  (as As₂O₃) : NMT 0.0004%  (4 ppm)

 9.      RSIDUE ON IGNITION  (Sulphated Ash)      :Max. 0.7%

10.    LIMIT OF HYDROLYSIS  PRODUCTS         :Passes the Test  as per USP and FCC .

11.    LIMIT OF METHANOL  :     Max. 0.1% (1000 ppm)                

12.    LIMIT OF LEAD  : Max. 0.0001% (1 ppm)

13.    ASSAY :Bet.  98.0 % to  102.0%      (Calculated on Anhy. Basis)

15.    PACKING : 10 Kgs. / 20 Kgs. Fibre drums with double PE liners.

:        1 Kg. packing on special request, in original intact packing.

16.    STORAGE:Preserve in a Cool and Dry place .    

(1)  NOMECLATURE       :        Edetate Di Sodium
:  Ethylene Diamine Tetra Acetic Acid Di Sod.

                                                          Salt.

(2)    EMPERICALFORMULA :        C₁₀ H₁₄ N₂ Na₂ O_{8 ,}  2 H₂O        

(3)    CAS NO.      :        139-33-3 (Anhy.)          

    :        6381-92-6 (Dihydrate)

(4) MOL. WT.                       :        372.24 (Dihydrate)

(5)           PHYSICAL PROPERTIES

          MELTING RANGE        :        250°C – 253°C(With Decomposition)

(6)    BULK DENSITY   :        0.65 gm/cm³ – 0.70 gm/cm³

(7) DESCRIPTION    :        White Sparkling Crystalline Material.

   :     Slightly bitter in Taste.:        Free Flowing.

  PURITY (ASSAY)   :        Minimum 98.5%   

1. Description :white, odorless, crystalline powder, having a

strong sweet taste .

2. Solubility :sparingly soluble or slightly soluble in water

and in alcohol.

:practically insoluble in hexane and in methylene  chloride.

3.   identifications:         

a) by uv

b) by ir

c) by tlc

d) by color development.

4.   clarity  and color of solution (appearance of solution)   :0. 8 gm. , is soluble in 100 ml. Water

the solution is clear and not more intensely colored than ref. Solution gy 6

5. Specific rotation       :+14. 5 deg. To +16. 5 deg.

6.   transmittance  : nlt 95. 0%

7. Diketopiperzine (dkp)

:less than 1. 5 %

8.   other  impurities (other related substances)

:  nmt 2%

9. Heavy metals:nmt 0. 001 % (10 ppm) .

10.   organic  volatile impurities    : pass the test (as per usp).  

11. Arsenic  :nmt 3 ppm  (as per usp)

12. Loss on drying:         nmt 4. 5%

13. Residue  on ignition (sulphated ash)

:nmt  0. 2%

14. Ph :4. 5 to  6. 0

15. Assay (odb):98. 0% to 102. 0%

16. Packing            :25 kgs. Fibre drums with double

pe liners.

:1 kg. Packing on special request, in original

intact packing.

17. Storage :store in an airtight container .

18. Available grades     :

1)  regular powder

  (80% passing through 100 mesh)

2)  regular granular

 (particle size, 20 to  60 mesh)

3)high density powder (hd powder)

(particle size, 100 to 200 mesh)

4)  fine granular

 (particle size, 60 to 100 mesh)

5)  super fine powder

 (passing through 300 mesh)

1.DESCRIPTION :White, Odorless, crystalline Powder, having a

strong sweet taste .

2.SOLUBILITY :Sparingly soluble or slightly soluble in Water

and in Alcohol.

:Practically insoluble in Hexane and in Methylene  Chloride.

3.  Identifications:         

A) By UV

B) By IR

C) By TLC

D) By Color Development.

4.  CLARITY  AND COLOR OF SOLUTION (Appearance of Solution)   :0.8 gm., is soluble in 100 ml. water

The solution is Clear and not more intensely colored than Ref. Solution GY 6

5.SPECIFIC ROTATION       :+14.5 Deg. to +16.5 Deg.

6.  TRANSMITTANCE  : NLT 95.0%

7.DIKETOPIPERZINE (DKP)

:Less than 1.5 %

8.  OTHER  IMPURITIES (OTHER RELATED SUBSTANCES)

:  NMT 2%

9.HEAVY METALS:NMT 0.001 % (10 ppm) .

10.  ORGANIC  VOLATILE IMPURITIES    : Pass the Test (as per USP). 

11.ARSENIC  :NMT 3 ppm  (As per USP)

12. LOSS ON DRYING:         NMT 4.5%

13. RESIDUE  ON IGNITION (Sulphated Ash)

:NMT  0.2%

14.pH :4.5 to  6.0

15.ASSAY (ODB):98.0% to 102.0%

16. PACKING            :25 Kgs. Fibre drums with double

PE liners.

:1 Kg. packing on special request, in original

intact packing.

17.STORAGE :Store in an airtight container .

18.AVAILABLE GRADES     :

1)  Regular Powder

  (80% passing through 100 Mesh)

2)  Regular Granular

 (Particle Size, 20 to  60 Mesh)

3)High Density Powder (HD Powder)

(Particle Size, 100 to 200 Mesh)

4)  Fine Granular

 (Particle Size, 60 to 100 Mesh)

5)  Super Fine Powder

 (Passing through 300 Mesh)

 White, odorless, free flowing crystalline powder.

:scentless white crystalline powder with strong sweet taste .

:freely soluble in water;

 very slightly soluble in ethanol.

heavy metals  :  nmt 5 ppm

ph (1% soln. )  : 5. 5 to  7. 5

organic impurities  :  less than 20 ppm .  

fluoride  : nmt 3 ppm

lead :  nmt 1 ppm

arsenic    :  nmt 3 ppm

selenium :  nmt 10 ppm

impurity a  :  nmt 0. 125%

impurity b  :  nmt  20 ppm

loss on drying   (105°c , 2 hr)  :  nmt 1. 0 %

assay  (titrimetric method)  :  bet. 99. 0%  to 101. 0% (odb)

storage   :the material shall be stored in a cool and dry place so as to avoid excessive exposure  to heat.       

Synonyms :

• Dibasic Potassium Phosphate.

• Phosphoric Acid, Dipotassium salt.
• Di Potassium Hydrogen Orthophosphate.
• Potassium Phosphate Dibasic.

Synonyms :

• Sodium Phosphate, Dibasic, Di Hydrate.

• Di Sodium Hydrogen Phosphate, Di Hydrate.
• Di Basic Sodium Phosphate, Di Hydrate.
• Di Sodium Phosphate, Di Hydrate.

PRODUCT : Chromium Picolinate

(Chromium Tripicolinate)

CHEMICAL FAMILY : Nitrogen Heterocycle, Metal salt.

C.A.S. REGISTRY : 14639  25  9

MOL. WT. : 418.30

CHEMICAL FORMULA : C18 H12 N3 O6 Cr.

APPEARANCE : Red/Reddish coloured fine powder.

PARTICLE SIZE : 100 mesh  200 mesh.

PURITY (ASSAY) : 98  - 99 .

POTENCY : Minimum  hromium Content  11.5 

(Generally, more than 12 ).

SOLUBILITY : Insoluble in water/organic solvent.

PH OF SUSPENSION : Approx 3.5  5.5

LOSS ON DRYING : Not More than 3 .

HEAVY METALS : Passes as per U.S.P. 4

(Not more than 20 ppm).

CHLORIDE CONTENT : Less than  0.06 .

SULPHATE CONTENT : Less than 2000 ppm. ( 0.2 )

ARSENIC : Less than 1 ppm.

MERCURY : Less than 1 ppm.

MICROBIAL LIMITS

TOTAL PLATE COUNT : Less than 10/G

E.COLI : - Ve

SALMONELLA : - Ve

PACKING : 5 kgs./10 kgs./25 kgs. 

NOMENCLATURE   :     5 – Chloro – 2 – Hydroxy Benzoxazole
 :       2 – Hydroxy – 5 – Chlorobenzoxazole

MOL. WT.  :     169.58

CHARACTERISTICS          :
 

DESCRIPTION                       :       Whitish Fine Crystalline Powder.

MELTING RANGE   : 191°C - 194°C

PURITY :       Chromatographic

                                                (By TLC): Complies with  U.S.P  : Individual impurity is not

more than 0.25%

ASSAY       :        98.9% to 100%

PHARMACOPEIAL     :        As per U.S.P.’23

SPECIFICATIONS

LOSS ON DRYING       :       Not more than 0.2% (Limit is 0.5%)

HEAVY METALS                   :         Not more than 0.002% (20 ppm Maxi.)

CHLORINE CONTENT           :        20.6% to 21.2%

RESIDUE ON IGNITION       :        0.15% Maxi.

PACKING       :        25 kgs. Fibre Drums with double PE Liners.

Synonyms :

• Primary Ammonium Phosphate.
• Ammonium Di Hydrogen Phosphate.
• Ammonium Bi Phosphate.
• Phosphoric acid, Mono Ammonium salt.

Synonyms :

• Mono Potassium Phosphate. (MKP)
• Monobasic Potassium Phosphate.

• Phosphoric Acid, Monopotassium salt.
• Potassium Phosphate Monobasic.
• Potassium Dihydrogen Orthophosphate.

Synonyms :

• Mono Sodium Phosphate (MSP)
• Monobasic Sodium Phosphate.