Scientific Instrument.

Leveraging on our dexterous workforce, we offer environmental test chamber, which is developed from leak proof materials. Known for their durability and reliability, our test chamber are available in the following standard sizes:

S. No.	Size in Cms.
1	(45 x 45 x45 Cm.)
2	(71 x 45 x45 Cm.)
3	(85 x 50 x50 Cm.)
4	(100x90x90 Cm.)

We offer cryostat bath that provides a simple and reliable solution for obtaining consistent results. Available in varied confioguration and specific requirement of our clients, below mentioned are the technical details of our products:

Order Code	Capacity
	Cu. ft	Ltrs
BTI - 3a	3 cft	90L
BTI - 3b	6 cft	180L
BTI - 3c	10 cft	300L

Also known as Environmental Test Chambers /Humidity Control Ovens – Double Walled – Inner SS – Outer MS – 3" Gap Puff insulation; Full length inner glass door for clear inner vies  Outer metal door with magnetic gaskets & lock. Forced air circulation for uniform temperature throughout the chamber. Dual display preset electronic digital Temperature controller Cum Indicator with cooling system by means of Hermetically sealed Compressor Unit coupled with evaporation Coil and Condenser. Temp. Range 10ºC to 60ºC 1ºC; Humidity Range 40% Rh to 90% Rh 3% Rh.

Order Code	Capacity
	Cu. ft	Ltrs
BTI - 3a	3 cft	90L

We offer a premium range of constant temperature water bath, which are known for their efficient operations and maintenance free operations. Available in various sizes, we can also provide made to order water bath as per client’s requirement.

Size Available:

S. No.	Capacity	Dimensions
1	2 rack	25x15x17 Cm
2	4 rack	35x 25 x 17 Cm

Features:

• Double walled construction.
• Stainless Steel fabricated inner chamber and lid.
• Outer chamber constructed with powder coated mild steel.
• Glass window fixed on the front for both sides, to provide a clear view during the immersion test.
• To prevent heat loss, there is high grade glass wool between the chambers to minimize the loss of heat.
• Working temp. range from ambient to 100°C, which is controlled by digital temp, indicator cum controller with ± 0.5°C of accuracy.
• For continuous stirring and maintaining uniform heating throughout the chamber, there is speed stirrer motor 1/20 HP is fitted in the unit.
• The heating mechanism comprises of set of heaters.
• Designed for external circulation to maintain constant temp and immersion requirements.
• Operates at 230 Volts AC only.

Filter Holder

These holders for vacuum filtration accept 47 mm diameter filters. the filter support is stainless steel screen

The ring allows autoclaving with a filter in position without stick age of the filter to the support, and also protects from breakage. it has a rim around the upper edge to simplify the positioning of the funnel and to avoid displacement of the filter. And a silicon O-Ring in the avoid

The screen fits between top and base part, and the whole is held together with a practical hand clamp.

The holders are supplied with a silicone lid, but without a bored stopper to fit them onto a suction Flask. Such a stopper must be additionally ordered according to the diameter required. When large numbers of samples are to tested, three or six holders can be used simultaneously buy fitting them on to manifolds.

 

Application

▲       Microbiological quality control, e .g testing of water, soft drink, beer and wine.

▲       Collection of particles for analysis, e. g. for the gravimetric determination of forging solid material in lubricating oils acc. To DIN 51592, and the microscopy of particles in infusion solutions to determine their origin

▲       Clarifying or ultra cleaning of liquid

 

Specification:

Material: Stainless steel 316 Quality

Filter support: stainless steel screen

Sealing: silicon O –ring

Funnel Cap: 250 Ml

Filter diameter required: Membrane filter, 47 mm prefilter, 47mm

Filtration area: 12.5 cm2

Maximum operating pressure: Vacuum Only.

Sterilization: Autoclaving (max.121 ˚C )