The Dynamic Hip Screw is designed to provide strong and stable internal fixation of a variety of inter-trochanteric, subtrochanteric and basilar neck fractures, with minimal soft tissue irritation. The DHS Plates are made of 316L stainless steel and are cold-worked for strength.

The Dynamic Hip Screw Plate System combines the strength of ASTM F-621 stainless steel with a low profile barrel/plate junction designed to reduce soft tissue impingement and irritation. An anatomically contoured plate helps ensure a snug fit through the entire length of the bone/plate interface.

A wide selection of sizes, barrel/plate angles, and screw hole configurations provide the versatility to use the system in a variety of indications, including intracapsular, intertrochanteric, and subtrochanteric fractures with extension into the piriformis fossa (Winquist Type III comminuted fractures).

Dynamic compression holes in the side plate allow * angulation of 4.5 mm Cortex Screws, for lag screw fixation of medial fragments * and axial compression and multiple-screw fixation of the main fragment in subtrochanteric fractures with shaft extension.

Two flats within the barrel correspond to the two-flat design of the Lag screw, preventing rotation of the lag screw within the barrel. The two-flat design also eases insertion of the plate over the Lag screw.

PLATES & SCREWS FOR HIP/CONDYLE,STAINLESS STEEL IMPLANT RANGE

BDS-18.04 D.H.S.Plate ,125', barrel length 38mm,4 D.C. holes,SS
BDS-18.05 D.H.S.Plate ,125', barrel length 38mm,5 D.C. holes,SS
BDS-18.06 D.H.S.Plate ,125', barrel length 38mm,6 D.C. holes,SS
BDS-19.04 D.H.S.Plate ,130', barrel length 38mm,4 D.C. holes,SS
BDS-19.05 D.H.S.Plate ,130', barrel length 38mm,5 D.C. holes,SS
BDS-19.06 D.H.S.Plate ,130', barrel length 38mm,6 D.C. holes,SS
BDS-20.04 D.H.S.Plate ,135', barrel length 38mm,4 D.C. holes,SS
BDS-20.05 D.H.S.Plate ,135', barrel length 38mm,5 D.C. holes,SS
BDS-20.06 D.H.S.Plate ,135', barrel length 38mm,6 D.C. holes,SS
BDS-20.07 D.H.S.Plate ,135', barrel length 38mm,7 D.C. holes,SS
BDS-20.08 D.H.S.Plate ,135', barrel length 38mm,8 D.C. holes,SS
BDS-20.10 D.H.S.Plate ,135', barrel length 38mm,10 D.C. holes,SS
BDS-20.12 D.H.S.Plate ,135', barrel length 38mm,12 D.C. holes,SS
BDS-20.14 D.H.S.Plate ,135', barrel length 38mm,14 D.C. holes,SS
BDS-20.16 D.H.S.Plate ,135', barrel length 38mm,16 D.C. holes,SS
BDS-21.04 D.H.S.Plate ,140', barrel length 38mm,4 D.C. holes,SS
BDS-21.05 D.H.S.Plate ,140', barrel length 38mm,5 D.C. holes,SS
BDS-21.06 D.H.S.Plate ,140', barrel length 38mm,6 D.C. holes,SS
BDS-23.04 D.H.S.Plate ,135', barrel length 25mm,4 D.C. holes,SS
BDS-23.05 D.H.S.Plate ,135', barrel length 25mm,5 D.C. holes,SS
BDS-23.06 D.H.S.Plate ,135', barrel length 25mm,6 D.C. holes,SS
BDS-40.050 D.H.S./D.C.S. Screw,len.50mm,SS
BDS-40.055 D.H.S./D.C.S. Screw,len.55mm,SS
BDS-40.060 D.H.S./D.C.S. Screw,len.60mm,SS
BDS-40.065 D.H.S./D.C.S. Screw,len.65mm,SS
BDS-40.070 D.H.S./D.C.S. Screw,len.70mm,SS
BDS-40.075 D.H.S./D.C.S. Screw,len.75mm,SS
BDS-40.080 D.H.S./D.C.S. Screw,len.80mm,SS
BDS-40.085 D.H.S./D.C.S. Screw,len.85mm,SS
BDS-40.090 D.H.S./D.C.S. Screw,len.90mm,SS
BDS-40.095 D.H.S./D.C.S. Screw,len.95mm,SS
BDS-40.100 D.H.S./D.C.S. Screw,len.100mm,SS
BDS-40.105 D.H.S./D.C.S. Screw,len.105mm,SS
BDS-40.110 D.H.S./D.C.S. Screw,len.110mm,SS
BDS-40.115* D.H.S./D.C.S. Screw,len.115mm,SS
BDS-40.120* D.H.S./D.C.S. Screw,len.120mm,SS
BDS-40.125* D.H.S./D.C.S. Screw,len.125mm,SS
BDS-40.130* D.H.S./D.C.S. Screw,len.130mm,SS
BDS-40.135* D.H.S./D.C.S. Screw,len.135mm,SS
BDS-40.140* D.H.S./D.C.S. Screw,len.140mm,SS
BDS-40.145* D.H.S./D.C.S. Screw,len.145mm,SS
BD

The Dynamic Condylar Screw Plate system is designed to provide strong and stable internal fixation of certain distal femoral and subtrochanteric fractures, with minimal soft tissue irritation. The plates are made of 316L stainless steel and are cold-worked for strength. The two holes closest to the barrel accept 6.5 mm Cancellous Bone Screws. This enhances stability by allowing: fixation of the most distal condylar fracture fragments with two or more screws, or fixation of the most proximal subtrochanteric fracture fragment with two or more screws.
• Dynamic holes in the side plate allow angulation of 4.5 mm Cortex Screws and axial compression across a shaft fracture.
• The number of screw holes per plate length is maximized, without compromising plate strength. This allows an increased number of fixation points with a smaller incision.
• Two flats within the plate barrel correspond to the two-flat design of the lag screw, preventing rotation of the lag screw within the barrel. The two-flat design also eases insertion of the plate over the Lag screw.
• Low-profile design reduces risk of iliotibial band irritation (distal femoral fractures) and trochanteric bursitis (subtrochanteric fractures). PLATES & SCREWS FOR HIP/CONDYLE,STAINLESS STEEL IMPLANT RANGE BDS-30.06 D.C.S.Plate , 95', barrel length 25mm, 6 holes ( 4+2),SS BDS-30.07 D.C.S.Plate , 95', barrel length 25mm, 7 holes ( 5+2),SS BDS-30.08 D.C.S.Plate , 95', barrel length 25mm, 8 holes ( 6+2),SS BDS-30.09 D.C.S.Plate , 95', barrel length 25mm, 9 holes ( 7+2),SS BDS-30.10 D.C.S.Plate , 95', barrel length 25mm, 10 holes ( 8+2),SS BDS-30.12 D.C.S.Plate , 95', barrel length 25mm, 12 holes ( 10+2),SS BDS-30.14 D.C.S.Plate , 95', barrel length 25mm, 14 holes ( 12+2),SS BDS-30.16 D.C.S.Plate , 95', barrel length 25mm, 16 holes ( 14+2),SS BDS-30.18 D.C.S.Plate , 95', barrel length 25mm, 18 holes ( 16+2),SS BDS-40.050 D.H.S./D.C.S. Screw,len.50mm,SS BDS-40.055 D.H.S./D.C.S. Screw,len.55mm,SS BDS-40.060 D.H.S./D.C.S. Screw,len.60mm,SS BDS-40.065 D.H.S./D.C.S. Screw,len.65mm,SS BDS-40.070 D.H.S./D.C.S. Screw,len.70mm,SS BDS-40.075 D.H.S./D.C.S. Screw,len.75mm,SS BDS-40.080 D.H.S./D.C.S. Screw,len.80mm,SS BDS-40.085 D.H.S./D.C.S. Screw,len.85mm,SS BDS-40.090 D.H.S./D.C.S. Screw,len.90mm,SS BDS-40.095 D.H.S./D.C.S. Screw,len.95mm,SS BDS-40.100 D.H.S./D.C.S. Screw,len.100mm,SS BDS-40.105 D.H.S./D.C.S. Screw,len.105mm,SS BDS-40.110 D.H.S./D.C.S. Screw,len.110mm,SS BDS-40.115* D.H.S./D.C.S. Screw,len.115mm,SS BDS-40.120* D.H.S./D.C.S. Screw,len.120mm,SS BDS-40.125* D.H.S./D.C.S. Screw,len.125mm,SS BDS-40.130* D.H.S./D.C.S. Screw,len.130mm,SS BDS-40.135* D.H.S./D.C.S. Screw,len.135mm,SS BDS-40.140* D.H.S./D.C.S. Screw,len.140mm,SS BDS-40.145* D.H.S./D.C.S. Screw,len.145mm,SS BDS-50.00 D.H.S./D.C.S. compression screw,SS * on request