Knee Arthroscopy

A highly precise drill guide available for cruciate reconstruction-The ONLoc Drill Guide conforms to each patient’s anatomy, offering surgeons flexibility, accuracy and control. The ONLoc Drill Guide is compact, for easier handling and added control. It was designed not only to fit comfortably in the surgeon’s hand, but to accommodate the full spectrum of knee anatomy.

The key features of the ONLoc Drill Guide are:

• A dovetail arm design
• An ergonomic guide handle precisely fitted for the surgeon’s hand
• Simple locking mechanism for one-handed operation of the guide
• Light-weight and compact for added control
• An angled bullet for engaging the cortex more consistently and securely
• A rectangular guide arm cross section that is more rigid than round cross section designs
• Comprises of Angled Bullet, ACL Elbow Aimer, PCL Tibial Aimer, PCL Femoral Aimer.

• Used to securely trap attached sutures and bulky suture knots atraumatically under the low profile head to eliminate soft tissue irritation.
• Available in titanium alloy and stainless steel versions.
  
  

  BAK-7011.30	Tibial post fixation screw,dia.6.5mm,len.30mm,Ti
  BAK-7011.35	Tibial post fixation screw,dia.6.5mm,len.35mm,Ti
  BAK-7091.30	Tibial post fixation screw,dia.6.5mm,len.30mm,SS
  BAK-7091.35	Tibial post fixation screw,dia.6.5mm,len.35mm,SS

  
  

• Cannulated cross pin provides the surgeon with maximum pull-out strength while maintaining fast and efficient implantation methods.
• Increased graft compression in the femoral tunnel gives a secure transverse femoral fixation second to none.
• With single cross pin fixation, the length and load to all four graft strands are equalized independent of tibial fixation, maximizing graft stiffness.
• Allows insertion by impaction and has reverse cutting threads for screw-out removal.

Cannulated Interference screw (roundhead)

• Specifically designed for endoscopic femoral fixation where graft protection is needed
• Polished, fully radiused threads provide maximum graft protection
• Wide-bore cannulation for easy guide wire removal
• The Taper-Tip style offers sharper initiating threads and a more pronounced taper for faster, easier insertion
• Round head reduces possibility of graft damage during or after implantation
• Standard 4.5mm hex for easier insertion and removal
• Available in titanium alloy
• Available in diameters 7/8/9/10mm & lengths 20/25/30/35mm
  

Cannulated interference screw (fully threaded)

• Universal screw for either tibial or femoral applications
• Standard 4.5mm hex for easy insertion
• Cannulated for use with a guide wire
• Designed to reduce the possibility of bone plug migration during placement
• Available in titanium alloy
• Available in diameters 7/8/9/10mm & lengths 20/25/30/35mm

BIDDU Tibial A/P Sloped Osteotomy Plates

• Opening wedge
• Precise, sloped plate
• For tibial osteotomy
• Maintains normal anatomy

Cannulated Tibial Reamer

·         Used for drilling bone tunnels in ACL and PCL reconstruction procedures.

·         Cannulated for use with a 2.4mm drill tip guide pin.

·         Graduated depth marks on three sides for easy identification of bone tunnel depth.

·         Available in diameters 6mm to 12.0mm(0.5mm difference)

Cannulated Femoral Flowertip Reamer

·         Suited for an endoscopic ACL technique whereby the femoral tunnel is reamed from inside-out while minimizing the risk of injury to the PCL.

·         Drill bit shaft is etched with depth marks on three sides for easy identification of bone tunnel depth.

·         Facilitates open femoral tunnel preparation and in-line tunnel reaming for endosteal fixation procedures.

·         Head profile permits easy withdrawal from bone tunnels.

·         Available in diameters 6mm to 12.0mm(0.5mm difference)

Cannulated Endoscopic Reamer, dia.4.5mm

Graft Prep Station

• Prepare and pre-tension patellar tendon, quadriceps tendon, semi-tendinosous and gracillis tendons, and allograft tendons for ACL or PCL reconstructions.

Graft Sizing Block

·         Allows the hamstring tendons to be harvested proximally without detaching them from the tibia.

·         The diameter of the stripper is large enough to accommodate the broadest semitendinosus tendon and the tip is sufficiently dull to prevent premature amputation of the graft.