Our fluid bed dryer consists of a simple drying unit and helps in the conversion to a granulation or coater when optional packages are incorporated. These dryers are available in standard pneumatic logic and sophisticated computerized controls and are also offered in Steam heated Model. Our dryers provide simple solution to dry products and are high in performance as compared to the conventional drying method in tray dryers, which is rather inadequate & troublesome.

The essential features of our array comprises of the following:

• Variable Air handling equipments from the basic compact pre-filter and heater to the system
• These equipments provide complete control of the condition of the processing air
• Uniform drying and reduction in drying time.
• Involves low labor input.
• To prevent any fine dust to pass through the product, the atmospheric inlet air is filtered by means of single / multi stage filters of 20 microns.
• Steam Coil made out of 1" dia. SS 304/316 finned tube
• The steam coil is specially designed to get pressure of around 3-4kg./cm^2 (working pressure 3 kg/cm^2)
• A digital temperature indicator cum controller enables in indicating the inlet and outlet air temperature as well as to control the present inlet air temperature
• To control the inlet and outlet air flow air suction and discharge dampers are provided
• To prevent static charge in the machine, an explosion safety flap of adequate capacity at the rear end of the dryer and an positive earthing point timer is provided that sets the process time cutting off the motor supply after pre-set time period

Technical Specifications:

Model	5		30	60	120*	200*	250*
Product Bowl Volume in Liters	20		100	220	440	780	960
Bacth Capacity In Kg	5		30	60	120	200	250
Heating capacity in KW	6		18	36	60	-	-
Steam Consumption Kgs/hr	14		25	50	100	160	200
Drying temperature in 0 C	50-80		50-80	50-80	50-80	50-80	50-80
Blower Motor (HP)	1.5		5	10	15	20	25
Electrical		2800 rpm / 3 Phase / A.C.

We supply Tray Dryer that is adequately designed by our designers and adroit personnel who take every care in the fabrication of a durable and highly efficient range of machines. Available in various models such as 12 trays, 24 trays, 48 trays, 96trays, these are high in performance and low on maintenance.

The significant traits of our exclusive array include the following:

Models: 12 trays, 24 trays, 48 trays, and 96 trays

Construction-

• Robust construction
• Built on formed angles of 3mm thick sheet and suitably reinforced with angles and sections
• External walls are manufactured from 1.6mm thick stainless steel sheets of 304 qualities
• The internal of the dryer is built of 1.6 mm thick s.s 304 quality sheets insulated with minimum 50 mm thick glass wool insulation and caddied with s,s, polished sheets
• Fresh air inlet through 20 micron pp cloth filters and a adjustable air outlet flap and a door at the front
• Explosion proof door is locked with the help of spring loaded ball latches with suitable pressure.
• To prevent leakages door lips are having neoprene rubber gasket

Finishing-

• Designed and manufactured as per GMP standard
• Aesthetic look
• Buffed externally to 150 grit matt finish
• Internally buffed to 220 grit mirror finish

Electrical heating-

• The Air inside the Tray Dryer is heated by "U" tube S.S.304 air heaters each of 1 KW.
• The heaters are fitted on the sides of the dryer to facilitate uniform heating.
• Maximum temperature attained inside the dryer is 100' C
• The temperature is indicated and controlled by a Digital Temperature indicator cum controller over full range of heating load
• The total heating load for it will be
12 Trays Dryer - 4 KW
24 Trays Dryer - 6 KW
48 Trays Dryer - 12 KW
96 Trays Dryer - 24 KW
• To prevent the heaters from becoming red hot these are inserted inside tubular pipe
• The terminals of the heaters are brought outside the dryer to make it safer for operations for solvent based products

Technical Specifications:

Model	BPE-24	BPE-48	BPE-96
No. Of Trays	24	48	96
Tray size	16 x 32 x 1.25	16 x 32 x 1.25	16 x 32 x 1.25