Bisineer India

The RED-5 BALL VALVES is manufactured in accordance with EN29000-ISO 9000 and can be used for domestic & commercial plumbing, industrial application, agricultural requirements & heating, sanitary, pneumatic system, water works, oil pipe line, hot water services, condensate services, petrol & other hydro carbon services etc.

BODY	Forged Brass
BALL	Forged brass, machined to mirror smooth finish, hard chrome plated.
SEAT	Pure PTFE Conical arc cut.
STENSEALS	Double "O" Ring of H-NPR (Hydro - Generated Nitrile Rubber ).
NUT	Self locking nyloc nut. BSP FEMALE THREAD.
MOP	40 kg
TEMP	-20 to + 140 deg c
SIZE	1/2 inches to 2 inches.

Our wide range of CRI pumps are being immensely
appreciated by our clients across the country. These are equipped with high
operating efficiency which results in lower power consumption. Moreover, these
are possessed with good suction lift characteristics. The features and
specifications are as follows:

• Dynamically balanced rotating
  parts including rotor & impeller


• Balanced and rigid
  construction


• Designed for wide voltage
  fluctuations


• Power range (kW):
  1.5kW-9.3kW


• Speed: 1440rpm


• Versions: A.C. Three Phase
  -380-415V-5OH


• Type of duty: S1
  (Continuous)


• Degree of protection: IP44


• Class of insulation: A


• Flow rate upto:
  60lps/216.0m3/hr.


• Head range upto: 32m/105ft


• Suction Lift upto: 7m


• Nominal Suction x Delivery
  Size in inches: 2½ x2,


• 3x2½, 3x3, 4x3 4x4, 5x5 &
  6x6


• Maximum liquid Temperature :
  33°C


• Maximum ambient Temperature :
  40º C

 Applications:

• Irrigation


• Agriculture


• Farms


• Gardens


• Industry


• Civil applications

Our wide range of Water pressure boosters – CH AND CM BOOSTERS   are being offered to various reputed companies in various sectors. These are fully automatic and make very low noise while functioning. The specifications and features are a follows:

• Fully automatic
• Highly energy efficient
• Individual pressure adjustment
• Just plug-in and use
• Very low noise
• Compact construction
• Discharge Range: 1-25 (m3 / hr)
• Head Range: Up to 100 (m)

These find their application in the following area:

• Pressure boosting in Homes, Industries, Commercial establishments, etc.
• Domestic Water supply, Gardening, Car wash, etc
• Water treatment, Fire fighting
• Liquid Transfer, Chiller, General Industrial Applications

We offer various models such as:

• CH 2-30
• CH 2-40
• CH 2-50
• CH 2-60
• CH 4-30
• CH 4-40
• CH 4-50
• CH 4-60
• CM 1
• CM 3
• CM 5
• CM 10
• CM 15
• CM 25

Product Code:

MHIL-WJ

We offer a wide range of GRUNDFOS Fire Fighting Systems and  Pumps for our clients. These pumps are used for handling corrosive liquids and sea water. These are manufactured using special materials

Salient Features :

• Pumps available in different type of construction for various TAC duties
  Capacities : 96 m³/hr. to 616 m³/hr. Heads : 56 m to 105 m
  
• Pumps for higher capacities and heads as per customer requirements also available.
  

Additional Parts:

• Pumps can be supplied with Mechanical seals
  
• Motor driven and Engine driven Fire Figting Pumps can be offered  with different combinations.
  

Models Available:

Vertical  Multi Stage Jockey Pumps
Horizontal Multi-Stage Pump
Horizontal Split Casing Pump
Horizontal End Suction Pump :

• Features:
  
  • Horizontal and Vertical execution
    
  • Speed: 1500 to 2900 rpm
    
  • Back pull out design
    
  • Design pressure 16 bar
    
  • Motor driven and Engine driven
    

We provide our clients with diesel and gas hot water
generator at highly competitive prices. These are design, fabricate, supply and
commission as per the requirements of our clients. The features of these
systems are as follows:

• Continuous Hot water round
  the clock


• Automatic Operation - No
  manual intervention


• Shell & Tube Construction
  - hence scaling minimized


• Option of both PLC based and
  analog based control systems available


• Low Power requirement - Less
  than


• 100 watts can be run on back-up
  power systems like UPS


• Switch over from Gas to
  Diesel or vice versa by interchange of respective burners


• Low noise, clean and High
  Efficiency


• Easy integration with solar
  water heater for fuel savings


• Hydro Pneumatic System -
  Pressure Pump compatible


• Energy efficient Huge savings
  in fuel cost compared to Electrical heaters

The
systems comprise of the following components:

• Hot water generator


• Mixing tank / caloriefier


• Circulation pump with motor


• Control system

HYDRO PNEUMATIC SYSTEM-GRUNDFOS

We offer our clients with high performance oriented HYDRO MPC / HYDRO 2000/HYDRO 1000 GRUNDFOS Hydro Pneumatic Systems at competitive prices. Manufactured as per the international  standards, they are being provided to clients only when they are passed through stringent quality tests.

Technical data

• Discharge without stand by pumps: 120 (m² / hr)
• Discharge with stand by pumps: 500 (m² / hr)
• Head: 150 (m)
• Motor with integrated Frequency Converter

Features

• Fitted with high pressure stainless steel pumps
• Base frame with height adjustable vibration dampers
• All pipework in Stainless Steel
• Fitted with Brass Valves
• Available with variety of control units like MPC etc
  

Applications
Pressurized water supply and pressure boosting in domestic, commercial, industrial and process engineering.

GRUNDFOS  has wide range of Industrial pumps which  are used in various applications such as Machine Tool Applications,Fire Fighting  Systems, Boiler Feed Systems, Hot Water Circulation, Water Treatment  Systems, Process Technology, Cooling Water Circuits, Washing, Pressure Boosting & Sprinklers, Irrigation etc. We offer our clients with customized solutions for their complete satisfaction. The features and specifications are as follows:

• All wetted components are corrosion proof
• All relevant components are suitable for potable drinking water .
• Fitted with standard mechanical seal
• Drive via IEC standard ,Eff 1and Eff 2 Motors
  
• Additional bearing to take axial thrust in lantern
• Design variants include glandless Construction, Frequency Converter etc
  

Multifuel
water heater consists of inner vessel and an outer vessel with rockwool
insulation in between. These heaters are highly cost effective and are high
performance oriented. The features are mentioned below:

• Enhanced firing surface area
  and heat transfer


• Pressure compatible,
  pressurised system


• Fuel choice of Firewood /
  Briquets / Husk / Gas / Electrical / Diesel or any of these fuel
  combinations available as an option


• Hygienic stainless steel
  containers (on select models)


• Sophisticated monitoring
  gadgets with automation option available on request


• Attractive looks - aesthetic
  design


• No consumption of space
  inside the bathroom


• Availability of hot water
  round-the-clock


• System can be placed at
  cellar or on the terrace or midway without requirement of a pump for flow
  of hot water


• Pressure pump /
  Hydropneumatic system compatible.


• Resin bonded rockwool
  insulation - hence longer period of heat retention

We offer our clients with reverse osmosis system at highly
competitive prices. These are tested on various parameters before supplying
them to the clients. The salient features are as follows:

• Stainless Steel Frames/Skids


• NSF compliant micron
  filtration


• All major equipments like pressure
  vessels, valves manufactured in house


• Standard instrumentation with
  eve meters, SDI measuring kit etc.

Specifications:

Particulars	PRODUCT WATER FLOWRATE ( LPH)	FEED WATER FLOWRATE (LPH)	RECOVERY	OPERATING PRESSURE (BAR)
PenROS – 500	500	2000	50%	12 to 20 BAR
PenROS-1000	1000	2900	70%	12 to 20 BAR
PenROS – 2000	2000	4300	70%	12 to 20 BAR
PenROS – 3000	3000	5700	70%	12 to 20 BAR
PenROS – 4000	4000	7100	70%	12 to 20 BAR
PenROS – 5000	5000	8000	75%	12 to 20 BAR
PenROS – 6000	6000	10700	75%	12 to 20 BAR
PenROS – 8000	8000	12000	75%	12 to 20 BAR
PenROS – 10000	10000	13300	75%	12 to 20 BAR

The
applications for these reverse osmosis system:

• Drinking water purification


• Light industrial applications
  like boiler feed, process water


• Utilities water applications
  in building complexes and industries
  

Product Code:

PenROS

Our softening system is being widely appreciated by our
clients because of their high quality standards. We offer our clients with
customize solutions to ensure the clients with complete satisfaction. The
salient features are as follows:

• Stainless Steel Frames/Skids


• NSF compliant micron
  filtration


• All major equipments like
  pressure vessels, valves manufactured in house


• Standard instrumentation with
  eve meters, SDI measuring kit etc.

Specifications:

Particulars	FILTRATION ON CAPACITY (LPH)	FILTRATION MEDIA QTY. (KGS)	VESSEL SIZE DIA X HEIGHT (MM)	VALUE TYPE & SIZE (Inches)
PenSOFT – 500	500	100	362 X1295	5600 – 1”
PenSOFT-1000	1000	180	473 X1640	5600 – 1”
PenSOFT – 2000	2000	270	552 X1489	2510 – 1”
PenSOFT – 3000	3000	360	610 X1731	2850 - 1 1/2”
PenSOFT – 4000	4000	450	770 X1815	2850 - 1 1/2”
PenSOFT – 5000	5000	540	770 X1815	2850 - 1 1/2”
PenSOFT – 6000	6000	630	770 X1815	2850 - 1 1/2”
PenSOFT – 8000	8000	720	927 X1856	3150 – 2”
PenSOFT – 9000	9000	800	927 X1856	3150 – 2”
PenSOFT – 10000	10000	900	927 X1856	3150 - 2”

These are
being applied in the various areas:

• Drinking water purification


• Light industrial applications
  like boiler feed, process water etc


• Utilities water applications
  in building complexes and industries

Product Code:

PenSOFT

We offer our clients with high graded Pressure Sand Filter
System at highly competitive prices. These are being tested stringently before being
supplied to our clients. The features and specifications are as
follows:

• Made with FRP / Composite
  Structural pressure vessels


• With Automatic Fleck
  filtration valves


• All major equipments like
  pressure vessels, valves manufactured in house


• Made with special iron
  removal media

 
Specifications:
 

Particulars	FILTRATION ON CAPACITY (LPH)	FILTRATION MEDIA QTY. (KGS)	VESSEL SIZE DIA X HEIGHT (MM)	VALUE TYPE & SIZE (Inches)
PenFIL – 500	500	45	257 X1173	5600 – 3/4”
PenFIL-1000	1000	85	362 X1295	5600 – 3/4”
PenFIL – 2000	2000	170	552 X1489	5600 – 3/4”
PenFIL – 3000	3000	268	610 X1731	2510 – 1”
PenFIL – 4000	4000	354	770 X1815	2850 - 1 1/2”
PenFIL – 5000	5000	438	927 X1856	2850 - 1 1/2”
PenFIL – 6000	6000	537	927 X1856	2850 - 1 1/2”
PenFIL – 8000	8000	710	1074 X1880	3150 – 2”
PenFIL – 10000	10000	890	1226 X 2070	3150 - 2”

 
These are
applied for the following purposes:

• Removal of colour, odour and
  impurities from utilities as well as drinking water for buildings and for
  light industrial applications


• Pretreatment to other water
  treatment plants

Product Code:

PenFIL

We offer our clients with solar water heater at highly
competitive prices. These are made of high graded raw material by using various
sophisticated machines. The various features and specification are as follows:

• Hot water at NIL running
  costs


• Huge savings in energy bills


• Needs no electricity/fossil
  fuels


• Pollution free and
  environment friendly


• In-built internal system
  piping for domestic models


• Capacity : 100, 200, 300,400
  & 500 LPD for domestic use, 600 to 10,000 LPD for industrial and
  commercial use


• Circulation type : Thermosyphonic
  and forced circulation


• Special designs : Pressure
  pump/ Hydropneumatic system compatible


• Collector : Corrosion
  resistant extruded aluminium sections with absorber selectively NALSUN
  Black Chrome


• Coated Copper-copper


• Glazing : High transsmitivity
  toughened glass


• Hot water tank : AISI 304
  prime stainless steel insulated and claded with aluminium


• Insulation : Resin bonded
  rockwool / Puf


• Tank & collector :
  Structural mild steel sections


• Accessories : Electrical
  backup heater Prerequisites


• Clear open sky on the roof
  top of the building with no tall adjacent buildings/trees which cast
  shadow


• No tree over hangs


• Minimum of 5 hours radiation
  per day availability


• Overhead tank must be 7 feet
  above roof level or system should be connected to a pressure device


• Sufficient roof area for
  installation of the system