Table Top

Our Bi–00-101 Makron Test System is easy to install and do not require any kind of cooling process. This single foot print assembly comes with a hydraulic powerpack, enclosure housing and a controller. Provision to mount actuator on top and the Llad frame with a T-slot bed may be located on the top of enclosure. We offer these systems ranging from 5 to 50 kN. Different types of static and dynamic tests can be performed by this system. In order to measure dynamic growth of tire during, laser based optical system is provided as per requirements.

Specifications:

• 0–100 Hz cycling frequency
• 5/10/15/25/50 kN force rating actuators
• +/-50 to 100 mm stroke actuators

Standard Features:

• Flexible operation
• Adaptable to wide range of fixtures & grips
• Energy efficient pumps
• User friendly MTL software

Applications:

• Tension/compression
• Low/High cycle fatigue (LCF/HCF)
• Damping force measurements
• Fatigue crack propagation
• Fracture mechanics
• Room temperature tests
• High temperature tests
• Elastomer testing
• Quality control and R&D industries
• Engineering institutions

We are known for our Bi-00-201 Series Nano Plug n Play test systems, which fulfills various mechanical testing requirements. In the 5 to 25 kN force range of static and dynamic loading, strength, fatigue and fracture of devices can be tested. There is no requirement of special utilities and site preparation such as 3-phase supply or water cooling. The system can be used by plugging it into 15 A mains socket like any other office equipment. For low cost testing application in engineering colleges and R & D unit, this system proves useful. With 24-bit data acquisition and digital signal conditioning, complete digital servo-control can be attained for load cell, stroke and extensometry.

Standard Features:

• Virtually noiseless
• No external cooling required
• Rated for indefinite operation
• USB interface for host computer
• Includes application software

Optional Features:

• +/-1.5 mm, 12.5 mm gauge LCF extensometer
• +4/-1 mm COD gauge for fracture mechanics
• Tension/compression extensometer
• Clevis set to suit B5/W12.5 C (T) specimens
• 3-pt bend fixture
• LCF/tensile grips for round specimens

Applications:

• Fatigue crack propagation
• Threshold stress intensity
• Tension/compression
• Ductile and brittle fracture
• Low/high-cycle fatigue (LCF/HCF)
• Elastomer properties

Other Specifications:

• 220V 2.0 kVA power requirement
• W600xL600x1750 mm outer dimensions
• 5/10/15 kN force rating actuator
• +/-25 mm stroke servo-actuator
• 0-100 Hz operation
• Approx 175 kg weight
• 6 kHz loop update and data acquisition