Our company has specialized in the sphere of manufacturing and exporting a wide range of Textile Printing Chemicals (Bluecoat PHOTO EMULSION) that is prepared under strict quality control and standards conditions to ensure optimum effectiveness. It is an effective technique of stencil preparation that makes the screen ready for printing in no time.

Procedure:

(A) Cleaning the Screen: wash the screen with clean water and dry it

(B) Mixing:

• Take 1 kg of Bluecoat emulsion in a clean vessel
• Take a glass of distilled water sufficient to mix 5 to 7 grams of Ammonium Bicromate
• Stir the solution till it is completely dissolved
• Mix the solution of Ammonium Bi-cromate with the Bluecoat solution of 1 kg and stir until the colour of the solution is changed to light uniform green
• Adjust the viscosity of the emulsion with distilled water
• Filter the emulsion with bolting cloth and close the container at least for 1/2 hour so that all the air-bubbles are disappeared

(C) Processing and Coating Techniques

• Use yellow light in Photography department
• Produce uniform pinhole free stencil for direct emulsion coating
• Fabric mesh number, thread diameter, colour of the fabric the tension and the solid contents, the thickness of the coating blade, angle and speed of the coating blade across the screens are some of the important factor that need to be taken care off
• If the coating is made to the satisfaction then one coating is sufficient from outside otherwise repeat the procedure

(D) Drying

• Thoroughly dry the coated screen before it is exposed otherwise stencil quality will be poor after the coating
• First coat be thoroughly dry before the second coat
• Dry the coated screens in horizontal position at room temperature with fans, to get best result and sharpness

(E) Exposure

• Adjust exposing time using fixed factors such as no of tube light, the quality of the light, set distance and set coating techniques and accordingly adjust photography time
• Time of photography varies between 30 seconds to 120 seconds under standard Conditions

(F) Washing

• Immediately after the exposure of screen wash the screen with gentle spray of water from the squeeze side until the image comes up
• If required use rubber foam gently

(G) Blocking out and touch up:

• Use the excess emulsion for filling the entire screen with a piece of cardboard

(H) Drying With Sensitizer:

• After washing the screen, dry the screen and apply with piece of cloth liquid solution of ammonium bi-cromate
• wash the screen with a sprayer to remove the excess bi-cromate

Advantages

• Time Saving
• Cost effective

We offer an array of Woodworking Adhesive (Bluecoat - 9000 - Synthetic Wood Adhesive) that has been appreciated for its bonding capacity and durability for Plywood, MDF, Particle board   and Laminate/Veneer. The adhesive is also used for filling knots, holes and cracks in all kinds of timber and wood.

Our Wood Working Adhesive is widely appreciated for Powerful Bond Strength, Suitable for Vertical/Horizontal applications and excellent spread ability for better coverage.

Usage Areas:

• Widely used for all types of Wood, Cold Press, Hot Press and Post forming applications
• For bonding of Plywood, MDF, Particle board   and Laminate/Veneer
• For Edge Bonding, Finger Jointing and Wooden Flooring (where water seepage is not present)
• For filling knots, holes and cracks in all kinds of timber and wood
• For the purpose of bonding paper, cardboard, Thermocol, Book-Binding, Pencil Manufacturing, Handicrafts and Paper Tube Making
• For manufacture of sports-goods, fabric-starching, and wall-paper fixing

Application Method:

• The surface which is to be bonded should be properly leveled and made free from oil,  grease, dust & excess moisture
• For best results roughen the surfaces to be bonded
• Excellent spread ability for better coverage
• The entire process of application & pressing should be completed within 10 minutes
• Both surfaces are then brought together with proper alignment and pressed firmly to ensure uniform contact & even spreading of adhesive
• Bonded area should be kept under pressure with the help of tapes, nails, clamps or support
• Any excess adhesive should be wiped out with a wet cloth immediately
• Pressure can be removed after 8 hours and it is now ready for the use. Complete curing is achieved in 24 Hrs

Advantages:

• Powerful Bond Strength
• Suitable for Vertical/Horizontal applications
• Excellent spread ability for better coverage
• Non Hazardous / non flammable and free from harmful solvents
• Prolonged shelf life without affecting the quality on storage
• Economical in a long run, since it ensures long life of furniture
• Free from grits & lumps for easy application
• Heat and fungal resistant
• Single component adhesive
• Special preservative used to protect adhesive from any bacterial growth during storage
• New International bucket packing ensuring  zero wastage
• Free from dust, grease, any foreign particle and for minimum skin formation.
• Conforms to IN/EN204D2 & IS4835:1979/97/99 (as per Indian Institute of Packaging).

Precautions:

• When not in use, keep the container closed
• Skin formation if any should be removed before use
• Stir the contents of the container well before use

Storage:

• Store Away from direct heat & Sunlight

Shelf Life:

• 1 Year from date of Manufacturing

Packing:

• Available in the packs of 125gms, 250gms, 500gms, 1kg, 2kg, 5kg, 10kg, 15kg, 20kg, 25kg, 30kg, 50kg

We offer a wide variety of Pressure Sensitive Adhesive (Bluecoat - 4509 Pressure Sensitive Adhesive) that is plasticizer - free polyvinyl acetate dispersion and used as an adhesive for stock papers. It has a medium viscosity that makes it suitable for machine application processes, as well as for screen or brush application. Our clients can also add small quantity of water for proper application.

Applications:

• Bluecoat 4509 is suitable for labeling on HDPE, LDPE, PET and PVC bottles
• Bluecoat 4509 can be used for manufacture of stock paper
• Bluecoat 4509 is also suitable for use in carpet backing
• Bluecoat 4509 is suitable for preparation of coating composition for sound proofing

Storage:

• Should be kept tightly closed, so as to prevent thickening and skin formation due to evaporation of water
• Pieces of skin / formation should be removed each time, prior to use
• In case water separation is observed, simple stirring with a wooden rod could be resorted to for making the material homogeneous once again
• Should be stored in a cool place
• No exposure to sunlight of heat

Shelf Life:

• 6 months to 12

Packing:

• Available in 50 kg

We manufacture a wide range of Lamination Adhesive (Bluecoat - 2709 LM Lamination Adhesive) that is Polyvinyl Acetate dispersion and widely used for print lamination. It provides high spreading and wetting on variety of surfaces and exhibits mild tack with adequate shear strength and elongation.

Properties:

• It is an internally plasticized copolymer dispersion of Vinyl Acetate
• Its surface properties are adjusted to give good spreading and wetting on variety of surfaces.
• Its rheology is adjusted to give economical flow over pickup rollers of application machines
• Its dried film exhibits mild tack with adequate shear strength and elongation
• It does not contain migratory plasticizer or solvent the dried film
• No colour leaching
• Controlled cohesive strength and elongation in the dried film

Applications:

• Suitable for print lamination of BOPP, Polyester, PVC and other films that gives good economics with excellent flatness, adhesion, transparency and gloss with paper
• The dried film is capable of handling fluting or wrinkling.
• Works as a common adhesive for all type of films inventory

Storage:

• Should be stored at cool place
• Should not be exposed to sunlight
• Container should be closed to avoid skin forming

Shelf Life:

• 6-8 months

Packing:

• Available in wide open mouth 50 kg car buoys

We offer an excellent quality of Paint Products (Bluecoat - LDB - Synthetic Adhesive Binder) that is widely used for manufacturing putty and lime & dry distemper. Available in both pouch and plastic container, the products can also be packaged as per the specifications, detailed by our clients.

Applications:

• LDB is a synthetic adhesive binder for lime & dry distemper.
• Can be used in preparation of Putty.

Feature & Benefits:

• Binder for lime & dry distemper.
• Easy to use, No heating required.
• Doesn't allow lime & dry distemper to come off the wall and binds them.

• Minimizes peeling & cracking of lime wash.
• Give smooth finish to the lime wash.

Packing:

• Pouch - 250 gm, 500 gm, 1 kg
• Plastic container - 5 kg, 15 kg