Synthetice Wood Adhesive

Listing Description 1) Powerful Bond Strength. Suitable for Vertical/Horizontal applications.
2) Excellent spread ability for better coverage. Detailed Description

Usage Areas

• Bluecoat 9000 is widely used for all Types of Wood, Cold Press/Hot Press and Post forming applications.
• For bonding Plywood/ MDF /Particle board etc with each other & also bonding with Laminate/Veneer etc.
• For Edge Bonding, Finger Jointing and Wooden Flooring (where water seepage is not present)
• For filling knots, holes and cracks in all kinds of timber and wood.
• For the purpose of bonding paper / cardboard / Thermocol / Book-Binding, Pencil Manufacturing, Handicrafts and Paper Tube Making.
• For manufacture of sports-goods, fabric-starching, and wall-paper fixing.

Application Method

• The surface which is to be bonded should be properly leveled and made free from oil / grease /dust & excess moisture. For best results roughen the surfaces to be bonded.
• Excellent spreadability for better coverage.
• The entire process of application & pressing should be completed within 10 minutes.
• Both surfaces are then brought together with proper alignment and pressed firmly to ensure uniform contact & even spreading of adhesive.
• Bonded area should be kept under pressure with the help of tapes, nails, clamps or support.
• Any excess adhesive should be wiped out with a wet cloth immediately.
• Pressure can be removed after 8 hours and it is now ready for the use. Complete curing is achieved in 24 Hrs.

Advantages

• Powerful Bond Strength. Suitable for Vertical/Horizontal applications.
• Excellent spreadability for better coverage.
• Non Hazardous / non flammable and free from harmful solvents.
• Prolonged shelf life without affecting the quality on storage.
• Economical in a long run, since it ensures long life of furniture.
• Free from grits & lumps for easy application.
• Heat and fungal resistant.
• Single component adhesive
• Special preservative used to protect adhesive from any bacterial growth during storage.
• "Zero Wastage Pack" - New International bucket packing with an in-built small lead on the main cap for minimum wastage, free from dust, grease, any foreign particle and for minimum skin formation.
• Conforms to... DIN/EN204D2, & IS4835:1979/97/99 (as per Indian Institute of Packaging).

Precautions

• When not in use, keep the container closed.
• Skin formation if any should be removed before use.
• Stir the contents of the container well before use.

Storage

Store Away from direct heat & Sunlight.

Shelf Life

1 Year from date of Mfg., under recommended storage conditions & in a sealed container.

Packing

Available in the packs of 125gms, 250gms, 500gms, 1kg, 2kg, 5kg, 10kg, 15kg, 20kg, 25kg, 30kg, 50kg

Min. Order Quantity 1000 Kilogram/Kilograms FOB Price Port Baddi Payment Terms L/C   Production Capacity 30000  Kilogram/Kilograms / Week Packaging Details As per Buyer requirement
Delivery Time As per Buyer requirement

CAS No.	1212
Place of Origin	Malaysia
Main Raw Material	VAM
Usage	Woodworking
Brand Name	BLUECOAT

Usage Areas

• Bluecoat Marine is widely used for all Types of Wood, Cold Press/Hot Press and Post forming applications.
• For bonding Plywood/ MDF /Particle board etc with each other & also bonding with Laminate/Veneer etc.
• For Edge Bonding, Finger Jointing and Wooden Flooring (where water seepage is not present)

Application Method

• The surface to be bonded should be properly leveled, free from oil/ grease/dust &excess moisture. For best results roughen the surfaces to be bonded.
• Apply even coat of adhesive on both the surfaces. Adhesive should be applied first on the non-porous surface and then on the porous surface with the help of spreader, roller or brush.
• The entire process of application & pressing should be complete within 10 minutes.
• Both surfaces are now brought together with proper alignment and pressed firmly to ensure uniform contact & even spreading of adhesive.
• Bonded area should be kept under pressure with help of tapes, nails, clamps or support.
• Any excess adhesive should be wiped out with a wet cloth immediately.
• Pressure can be removed after 8 hours and put to use. Complete curing is achieved in 24 Hrs.

Advantages

• Suitable for Vertical/ Horizontal applications.
• Excellent spreadability for better coverage.
• Non Hazardous / non inflammable and free from harmful solvents.
• Prolonged shelf life without affecting the quality on storage.
• Economical in long run.
• Special preservative used to protect adhesive from any bacterial growth during storage.
• Single component adhesive.
• "Zero Wastage Pack" - New International bucket packing with an inbuilt small lead on the main cap for minimum wastage, free from dust, grease, any foreign particle and for minimum skin formation.
• Conforms to... DIN/EN204D2, & IS4835:1979/97/99 (as per Indian Institute of Packaging).

Special Features

• Bluecoat Marine is manufactured by advanced German Technology.
• Superior water resistance adhesive.
• High Initial Tack for strong grip.
• More penetration power into pores for strength.
• Heat, Water and fungal resistant.
• Micro-bonding Effect.
• More open time
• PH balanced.

Precautions

• When not in use, keep the container closed.
• Skin formation if any should be removed before use.
• Water should not be added for dilution, as it may adversely affect the performance of product.
• Stir the contents of the container well before use.

Storage

Store Away from direct heat & Sunlight.

Shelf Life

1 Year from date of Mfg., under recommended storage conditions & in a sealed container.

Packing

Available in the packs of 1kg, 2kg, 5kg, 10kg, 15kg, 20kg, 25kg, 30kg, 50kg
New International packing with an in-built small lead on the main cap for minimum wastage, free from dust/grease / foreign particle and minimum skin formation.

Place of Origin	Himachal Pradesh, India
Classification	Other Adhesives
Main Raw Material	VAM
Usage	Woodworking
Brand Name	BLUECOAT
Model Number	BLUECOAT D3
high strength cross linker adhesive.	homo-polymer emulsion

Listing Description * Bluecoat D3 is non structural adhesive for joining wood and derived timber products such as bonding of furniture . Detailed Description

Bluecoat D3 is high strength cross linker adhesive.
Bluecoat D3 adhesive is a high viscosity homo-polymer emulsion & on drying cross links to form water resistant films.

Usage Areas

• Bluecoat D3 is non structural adhesive for joining wood and derived timber products such as bonding of furniture internal structures, paneling, doors, windows lamination etc
• For bonding laminates, plywood, veneer, block-board, Hard-board, MDF etc
• Bluecoat D3 is to be used in places, where there is intermittent water splashing where high water resistance is required. It cannot be used where there is rain or continuous water splashing.
• For edge bonding, finger jointing, cold press / hot press, post forming application & wooden flooring. (where water seepage is not present)

Application Method

• The surface to be bonded should be properly leveled, free from oil/grease/ dust & excess moisture. For best results roughen the surfaces to be bonded.
• Apply even coat of adhesive on both the surface. Adhesive should be applied first on the non-porous surface and then on the porous surface with the help of spreader, roller or brush.
• The entire process of application & pressing should be complete within 68 minutes.
• Both surfaces are now brought together with proper alignment and pressed firmly to ensure uniform contact & even spreading of adhesive.
• Bonded area should be kept under pressure with help of tapes, nails, clamps or support.
• Any excess adhesive should be wiped out with a wet cloth immediately.
• Pressure can be removed in 3-4 hours & put to use.
• The adhesive has a good wet tack, reasonable open time and is mechanically stable and will crosslink after evaporation of water.

Advantages

• Powerful bond strength.
• Economical in long run.
• The adhesive has a good wet tack & reasonable open time.
• The adhesive is mechanically stable & will crosslink after evaporation of water.
• "Zero Wastage Pack" - New International bucket packing with an inbuilt small lead on the main cap for minimum wastage, free from dust, grease, any foreign particle and for minimum skin formation.
• Meets... BSEN 204 conditions for D3.
• Conforms to... IS4835:1979/97/99 (as per Indian Institute of Packaging).

Special Features

• The water resistance of the product is much powerful to conventional wood adhesive.
• Special PVAs & preservatives are used for better performance.
• Specially designed to use under humid conditions.
• Suitable for all types of laminates & panel sheets.
• Unique bond strength.
• Economical in long run.
• Heat, Water and Fungal resistant.
  

Place of Origin	Gujarat, India
Classification	Other Adhesives
Main Raw Material	Acrylic
Usage	Construction, Woodworking
Brand Name	BLUECOAT
Model Number	Bluecoat Plus
White	White

Listing Description Bluecoat - Plus - Synthetic Wood Adhesive Detailed Description
Bluecoat - Plus - Synthetic Wood Adhesive
(Fast Bonding - Great Savings)

Usage Areas

• Bluecoat Plus is widely used for all Types of Wood, Cold Press/Hot Press and Post forming applications.
• For bonding Plywood/ MDF /Particle board etc with each other & also bonding with Laminate/Veneer etc.
• For Edge Bonding, Finger Jointing and Wooden Flooring where water seepage is not present.
  

Application Method

• The surface to be bonded should be properly leveled, made free from oil/grease/dust &excess moisture. For best results clean the surfaces to be bonded.
• Apply even coat of adhesive on both the surfaces. Adhesive should be applied first on the non-porous surface and then on the porous surface with the help of spreader, roller or brush.
• The entire process of application & pressing should be complete within 12 minutes.
• Both surfaces are now bought together with proper alignment and pressed firmly to ensure uniform contact & even spreading of adhesive.
• Bonded area should be kept under pressure with help of tapes, nails, clamps or support.
• Any excess adhesive should be wiped out with a wet cloth immediately.
• Pressure can be removed after 6 hours and put to use. Complete curing is achieved in 24 Hrs.
  

Advantages

• Powerful Bond strength. Suitable for Vertical/ Horizontal applications.
• Excellent spreadability for better coverage.
• Non Hazardous / non flammable and free from harmful solvents.
• Economical in long run.
• "Zero Wastage Pack" - New International bucket packing with an in¬built small lead on the main cap for minimum wastage, free from dust, grease, any foreign particle and for minimum skin formation.
• Conforms to... DIN/EN204D2, & IS4835:1979/97/99 (as per Indian Institute of Packaging).
  

Special Features

• Faster Bonding- Time saving leading to increased productivity & faster completion of project
• Heat and fungal resistant.
• Special preservative used to protect adhesive from any bacterial growth during storage.
  

Precautions

• When not in use, keep container closed.
• Skin formation if any should be removed before use.
• Water should not be added for dilution, as it may adversely affect the performance of product.
• Stir the contents of container before use.
  

Storage

Store Away from direct heat & Sunlight.

Shelf Life

1 Year from date of Mfg., under recommended storage conditions & in sealed container.

Packing

Available in the packs of 1kg, 2kg, 5kg, 10kg, 15kg, 20kg, 25kg, 30kg, & 50kg

Min. Order Quantity 1000 Kilogram/Kilograms FOB Price Port Baddi Payment Terms L/C   Production Capacity 30000