We manufacture a wide range SINGLE MODE and MULTI-MODE Patch Cords that are available with plastic moulded plug type connectors, complaint with telecom GR-326-CORE. Good Exchangibility, Standard Housing and Low Insertion Loss and High Return loss are some of the features that make our products applicable in:

• Telecom and Data-com
• CATV
• MultiMedia
• Gigabit Systems (Ethernet, ATN, SONET)
• ODF of optical transmission systems
• FTTX
• Computer Networks
• Data processing networks
• Connection of fibre optic equipments

 
The specifications of our products are:

• Insertion Loss (I.L in S.M) < 0.2dB , (I.L in M.M) < 0.3dB
• Return Loss (R.L) > 50dB
• Working Temp Range© -40~80 -40~80

 
Optional features:
 

• Simplex and Duplex
• Single mode and multi mode
• PC polishing,
• Fan-out, Pigtail
• Hybrid patch cord upon request
• Customized length
• Cable O.D : 0.9mm, 2.0mm, 3.0mm.

Optical Fibre Products:-   OPTICAL SPLITTERS, FDF, FDMS, Patch Cords of all combination SC, ST ,FCPC, FC APC, LC, MRTJ, L2000, Attenautors  5, 10, 15, 20 IN all combination, Adaptors FCPC, APC, SC all male and female combination,SFP, Media single and double fibre, SM AND MULTI MODE, and Interface converters  -- E1, V.35, RS232, RS485 , LAN extenders (Authorised reseller of  TYCO)   

CAT5e, CAT6, UTP-UNSHIELDED TWISTED PAIR, FTP-FOIL TWISTED PAIR Networking Cables are manufactured by us.


Category 5 cable, commonly known as Cat 5 or "Cable and Telephone", is a twisted pair cable type designed for high signal integrity. Many such cables are unshielded but some are shielded. Category 5 has been superseded by the Category 5e specification. This type of cable is often used in structured cabling for computer networks such as Ethernet, and is also used to carry many other signals such as basic voice services, token ring, and ATM (at up to 155 Mbit/s, over short distances).

Category 6 cable, commonly referred to as Cat 6, is a cable standard for Gigabit Ethernet and other network protocols that is backward compatible with the Category 5/5e and Category 3 cable standards. Cat-6 features more stringent specifications for crosstalk and system noise. The cable standard provides performance of up to 250 MHz and is suitable for 10BASE-T / 100BASE-TX and 1000BASE-T (Gigabit Ethernet). It is expected to suit the 10GBASE-T (10Gigabit Ethernet) standard, although with limitations on length if unshielded Cat 6 cable is used. Category 6 cable can be identified by the printing on the side of the cable sheath.

We are offering a wide range of OFC connectors, adapters and attenuators, which are available in following features:

CONNECTORS :

Features:

• Precise dimension
• Excellent durability and performance
• Zirconia ferrule provides extra low and stable loss
• Working Temp : Range: -40C to 80C.

Availabilities:

• LC / SC / FC / ST / MT-RJ / MU / DIN / SMA / D4 / E2000
• Single Mode and Multi Mode, PC and APC
• Pre-assembled one-piece or as connector kits
• Housing kits without ferrule available
• Boots in various colours, Boot I.D : 0.9mm, 2.0mm, 3.0mm.

ADAPTERS :

Features:

• Precise sleeve for excellent alignment
• Durability : <0.20dB change after 1000 mating cycles
• High performance and reliability
• Working Temp : Range : -40C to 80C.

Availabilities:

• LC / SC / FC / ST / MT-RJ / MU / DIN / SMA / D4 / E2000
• Simplex and Duplex
• Singlemode and Multimode
• PC and APC
• Plastic housing and Metal housing
• Hybrid adapters

ATTENUATORS :

Features:

• Air-gap
• Compact size
• Light weight
• Metao ion doped fiber
• High power light source durability
• Wavelength independence.

Applications:

• CCTV
• Passive optic networks
• Network testing
• Erbium Doped Fiber Amplifiers (EDFAs)
• Dense Wave Division Multiplexers (DWDM’s)
• Overpowered fiber optic systems, WANs, MANs,

Availabilities:

• FC, ST, SC, LC

Attenuation Value: 1 to 30 dB.

We deal with a wide range of WALL CABINETS from 6U to 17U sizes , FLOOR STANDING CABINETS from 17U to 42U sizes, LIU (Lightguide Interconnect Unit),  PATCH PANELS etc..,   

Configuration :

• Specially designed for Smaller/Medium and Large Networks.
• Confirms to DIN 41494 standard
• Rugged Design – 1.5mm thick steel with  Phosphate treatment for rust prevention
• Knockdown Structure

Specification Chart :

WALL MOUNT:

Specification	Cabinet Size
6U	570 x 600 x 315
9U	570 x 600 x 450
12U	570 x 600 x 585

FLOOR STANDING :

17U	570 x 600 x 900
22U	570 x 600 x 1095
27U	570 x 600 x 1365
32U	570 x 600 x 1595
42U	570 x 600 x 2035

Accessories Available :

Equipment Shelf Plate, Cooling Fan, Cable Manager, Power Manager

LIU (Lightguide Interconnect Unit)

The above are available in Wall Mount and Rack Mount models

WALL MOUNT Features:

• Two compartment design with adaptor panel in center
• Aluminum housing fully powder coated
• Door with lock and key
• Rubber gourmets are provided at the cable entry points for tight sealing
• Available in 6,12 and 24 port

RACK MOUNT Features:

• 19” Rack Mountable Cabinet
• Complete aluminium housing, fully poder coated
• Rubber gourmets are provided at the cable entry points for tight sealing
• Fully cushioned splice holder containing grooves for fixing splice protection sleeves
• Available in 12 and 24 port for ST, FC, SC-APC, LC Couplers

To meet the increasing demands of various testing procedures, we offer a wide range of Test Instruments. Precisely engineered, these tests instruments comprises of Splicing Machine and OTDR, RF Meter and Optical Instruments and are used to test following:

• Testing fiber optic cables
• Slicing of optical fiber cables
• Testing of coaxial cables
• Testing of faults in optical fiber cables on various parameters

THRU LINE Digital RF Power Meter -  UPTO 2500MHZ of SCHOMANDL for GSM/CDMA site testing ,Calibration kit,  SITE MASTER,FREQ COUNTER AND BER TESTER 

Manufacturing a wide range of CCTV, we offer high performing instruments that have been equipped with tools to provide instant alerts at times of trouble thus assuring crime to be prevented.

TYPE OF CAMERAS :

• DOME CAMERAS
• BOX CAMERAS
• IR CAMERAS
• SPEED DOME CAMERAS
• IP CAMERAS
• 4-8-16 CAHNNEL DVR’s/  DVR CARDS / MOBILE DVRS / MJPEG DVRS

CLOSED-CIRCUIT TELEVISION (CCTV) : is the use of video cameras to transmit a signal to a specific, limited set of monitors. It differs from broadcast television in that the signal is not openly transmitted, though it may employ point to point wireless links. CCTV is often used for surveillance in areas that may need monitoring such as banks, casinos, airports, military installations and convenience stores. People can also buy consumer CCTV Systems for personal, private or commercial use. A more advanced form of CCTV, utilising Digital Video Recorders (DVR), provides recording for possibly many years, with a variety of quality and performance options and extra features (such as motion-detection and email alerts). In industrial plants, CCTV equipment may be used to observe parts of a process from a central control room; when, for example, the environment is not comfortable for humans. CCTV systems may operate continuously or only as required to monitor a particular event.

Our wide range of Optic Fiber Cables is fabricated at our principles manufacturing
unit by adopting latest technological development. We deal with the following type of OFC Cables.

1) Indoor optic fiber cables - Simplex / Duplex / Distribution cables
2) Loose tube cables - Unitube for catv / unitube armoured di-electric
3) Ribbon fiber cables  - multi-tube armoured / di-electric cables         


I.  INDOOR OPTICAL FIBRE CABLE – SIMPLEX/DUPLEX

Suitable
for indoor use in short haul links and patchcord pigtail assemblies.
The cords are reinforced with aramid yarn and designed to fit any
standard connector type. The tight buffer is easy to strip allowing
fast and reliable splicing and connector mounting. The outer sheath is
color coded and marked to show the fiber type and cable type.

These
indoor cables are constructed with highest quality optical fibers from
internationally reputed manufacturers and the cable manufacturing is
done under strict quality assurance system adhering to ISO 9001 Quality
System.
 
II.  LOOSE TUBE CABLES FOR CCTV – UNITUBE/MULTITUBE

Suitable
for aerial, duct buried applications.  Unitube CATV Cables offer
significant advantages in installation and deployment time. The
strength members are provided around the buffer tubes to ensure
excellent crush and impact resistance and to enable easy access to
fibers during cable splicing.
These Cables are constructed with
highest quality optical fibers from internationally reputed
manufacturers and the cable manufacturing is done under strict quality
assurance system adhering to ISO 9001 Quality System.
 
III. RIBBON FIBER CABLES :

Suitable
for aerial, buried or duct applications, Ribbon Fiber cables are the
most widely used cables today.  Ribbon Fiber cables are available in a
wide variety of standard and customized configurations. Standard
configurations are dielectric or armored with a single or dual jacket
design.

Cables are constructed with dispersion unshifted
single mode fiber. These fibers are matched clad, consisting of a doped
silica core surrounded by a concentric silica cladding. The stranded
single mode matched clad fibers are designed for the transmission of
large complicated data, video, and voice with very low transmission
loss.

Our wide range of Telecom products are precisely engineered and fabricated out of superior quality raw material. We procure the following products :

Co-Axial Connectors & Adapters:-  7/16DIN, N, SMA, TNC, BNC, SMZ, SMB, SSMB,SMC, C3, C4, C5, KMX3, BMA, BMC, FMA, MICRO DOT, MIM, NEC TYPE, QLNA, QLN, QSMA, QMA, SMP, TC4, TWIN, Mini BNC, SSMB, Type 43, FME, TNF, TQ, SMC, M4, ERI, UHF Connectors for all kind of cables. and Customized coaxial  jumper cable

RF Components :-  Power dividers, Matching Transformer 120E to 75E (BalUN) with RJ45, BNC, M4 and Banana Termination, Dummy Loads  5, 10, 25, 50, 100, 200W, DC Blocks, Coupler 2,3,4 way, Attenuators 10, 20, 30, 40dB in 2, 10, 20, 50W, LIGHT Arrestors - Dual Band 900-2500 and DDF

HEAT SINK Products:-   Sleeves, boots end Caps, Multi core termination kit, Feeder Clamp, Earthing kit, Weather proofing kits, etc

EARTHING KITS TOOLS: -Earthing Kits, Spanners, Torque Wrench, Straight, Panel Jack Receptacle Wrench, Burners, Wire Wrapping, and Water Proofing Kit.

Radio Equipments, GSM / CDMA Repeaters,JAMMER FOR MILLITARY OR ANY OTHER  APPLICATION, Wave Guides, LNA.... 

BlueCross offers various high quality & superior grade parabolic dish antennae in a variety of models for a wide range of applications. BlueCross has an installed base for more than 30,000 antennae and all these have been working satisfactorily.  
 
FEATURES

• High parabolic accuracy for excellent gain
• Available in various sizes i.e. 6’, 8’, 12’, 16’, 20’ & 24’
• Heavy Duty AZ-EL mount
• Easy steerability
• Easy assembly & maintenance
• High wind loading capacity
• Highly rugged design & environmentally proven
• Choice of either quadrapod, monopole, tripod or
• Kingpost antenna stand
• Motorised Antennae system for 12’, 16’, 20’ size,
  

FEATURES

Ku-band Dish Antenna

Offset & Prime Focus type: Available in all sizes from 35/ 45/ 55/ 60/ 65/ 75/ 85/ 90/ 100/ 120 & 180 cms.

High gain, High quality, Rugged, Highly reliable and tested for 200 km wind load

• Aluminium mesh or perforated sheet parabolic reflector
• Optional powder coating for the parabola 
• Optional sliding & fixed screw type of reflector petals
  

MODELS

• 24’ & 20’ very heavy duty antenna with 3 rings & 30 ribs for special applications
• 16’ dish antenna with 30 ribs (of which 15 nos supported by double truss structure) & aluminium mesh / perforated sheet parabolic reflector
• 12’ dish antenna with 20 ribs, 2 supporting rings &aluminium mesh / perforated sheet parabolic reflector 
• 8’ dish antenna with 16 or 24 ribs & aluminium mesh / perforated sheet parabolic reflectorl 6’ dish antenna with 18 ribs & aluminium mesh / perforated sheet parabolic reflector.

Antenna- Magnetic, Patch Panel, Omni, Yagi, Wipe, Ceilling, Indoor, Outdoor  for Broad Band 2.4, 5.8 GC, WIFI/Wimax, Vsat, GPRS,GPS AND SM/CDMA/3G, TRANKING RADIO IN VHF/UHF..    

ALL RG SERIES CABLES/PTFE/CCTV/ TELEPHONE/ INSTRUMENTATION/SHIELDED & UNSHIELDED CABLES Coaxial Cable, a high frequency transmission cable that consists of a center wire surrounded by insulation and then a grounded shield of braided wire. Coaxial cable may be rigid or flexible. Rigid types have a solid sheath, while flexible types have a braided sheath, both usually of thin copper wire. The inner insulator, also called the dielectric has a significant effect on the cable?s properties, such as its characteristic impedance and its attenuation. The inner insulator may be solid or perforated with air spaces. Coaxial cable has the advantage of very minimum electrical and radio frequency interference and also it can carry a lot a data. Coaxial cabling is the primary type of cabling used by the cable television and is also widely used for computer networks as Ethernet. Although more expensive than standard telephone wire, it is much less susceptible to interference and can carry much more data.

Cable That Stands The Test Of Time

Our Co-Axial Cable offers uncompromising quality  for today’s digital networks. Our impressive range of coax products include drop cable designed to protect last-mile network integrity, robust trunk and distribution cables featuring high speed capacity and streamlined headend cable solutions for the HFC network core. Manufactured to exacting quality standards, our cables meet or exceed  specifications for 75Ù (75 ohm) broadband networks.

BlueCross is dedicated to cabling innovations. Our engineers participate in industry standards groups and critical committees. Bringing to market the most comprehensive choice of quality cable remains a primary focus. Our products meet the requirements of existing electronics, yet empower service providers to push the limits of today's services.

Co-axial Cables:-   7/8", 1/2", 1/4", RG59, RG06, RG11, 500SERIES, CCTV3+1, 4+1, RG 316, RG-174, RG179, RG 196, RG 187, BT3002, Suco FORM Cable 0.141, 0.86, RG213, RG214, RG217,RG58, RG59, RG402, RG400, LMR-200, LMR-400, 600,LEAKY CABLE  

Our expert workforce assisst us in providing installation services for Optic Fibre Systems & Networking Systems (Both Indoor & Outdoor works).  We specialize in Splicing of Optic Fibre Cables (Single-Mode & Multi-Mode - 2 to 96 Fibers). and OTDR checking and reports.  Our field engineers will also recommend and plan your network,  give the list of equipments to be used/required and quote an approxiamate figure for the set-up including Installation and Commissioning cost and time frame for completion of work. We utilize the best Machines, Tools and Test Instruments to give you trouble-free working of system/network and also assure you of zero defect and complaints in splicing of fibre.  We have implemented several Large and Small projects of the likes of MSO's, Government Agencies, IT/Telecom Companies, Railway Institutions etc.. etc.. to their utmost satisfaction. We have been serving now for over a decade.