Blue Steel Engineers Private Limited

It is designed to minimize the possibilities of variations in readings resulting from various contact pressures of manual operation. These are offered both in analog as well as in digital models. The analog model SHR - A - SUPER - Y2K / SHR - D - SUPER - Y2K has a specially designed CONSTANT-CONTACT-PRESSURE LOAD-CELL internationally patented which earned us not only the NATIONAL AWARDS FOR INVENTION but was also awarded the GOLD MEDAL at the IENA (INVENTORS' FAIR) at NUREMBERG-GERMANY in October 1999.

Analog tablet hardness tester used in Pharmaceutical industry.

Range : 0 - 20 kgf.

Tablet : Size 3 to 28 mm dia.

MODEL : THP

Analog tablet hardness tester used in Pharmaceutical industry. Range : 0 - 20 kgf. Tablet : Size 3 to 28 mm dia. MODEL : THP

BLUESTEEL manufactures a wide variety of durometers for polymers, composites and like materials to measure hardness of natural and synthetic rubber products, acrylics, acetates, polymers, thermoplastics, PVC, hardboards, wood, fruits and many other non standard materials. Round type analog Durometers have a dial graduated from 0 to 100 spread across 360 degrees thereby making it easily readable and accurate in measured values. The circular Durometers are provided with a maximum indicating hand for determination of creep properties of materials under test. The circular Durometer SHORE A is supplied with a unique 3-in-1 test gauge to check the accuracy of Durometers at 25,50 and 75 hardness nos.

It is available in Three Models MODEL : SHR-A-Di-PEN SHR-D-Di-PEN SHR-(A+D)-Di-PEN Technical Data: Indentor : Truncated/Conical Scale : 0 - 100 Packing : Wooden Box Diamentions : mm18 dia x mm 180 long Weight : g 250 Range : 0 to 100 Shore nos.

DIGITAL TABLET TESTER Digital tablet hardness tester used in Pharmaceutical industry, incorporating a) load range from 0.3 to 50 kg with a resolution 0.01 kg. b) built-in digital read-out and a printer to provide readings of all the data such as tablet size, time and date of test, no of tablets tested, minimum and maximum reading with average value of all readings. c) protection against flying of powder and collection of broken tablets. MODEL : DIGI-TAB.

These are standard devices suitable for holding the Durometers so as to allow for a series of tests quickly. The tester is fitted on to the pins in the stand and the specimen kept on the platform is lifted to the tester by pressing the knob. Separate stands are used for Shore-A and Shore-D testers as each stand has a separate built in loading device to give a constant contact pressure confirming to international standards.

For measuring external bores

Range	0.05 x 10 mm
Throat depth	25 mm

useable reach of arms

 

MODEL : DCG

In Digital version, the constant force is achieved by a series of special springs. The salient features are: * "SET","ZERO" and "HOLD" facility * Large clear digital display * Battery operated - 1.5 v, SR 44 * Digimatic output from 0 to 100 units * Manufactured in accordance with International Standards

Digital tablet hardness tester used in
Pharmaceutical industry, incorporating

a) load range from 0.3 to 50 kg with a
    resolution 0.01 kg.

b) built-in digital read-out and a printer
    to provide readings of all the data
    such as tablet size, time and date
    of test, no of tablets tested, minimum
    and maximum reading with average
    value of all readings.

c) protection against flying of powder
    and collection of broken tablets.

MODEL : DIGI-TAB

This is another version of circular durometers, in which the main dial is horizontally read for the sake of convience. All other characteristics remian the same. Model No : SHR - AH GOLD Model No : SHR - DH GOLD

New "Poldi" type impact hardness tester for thick metals as well as thin metalic sheets upto 1 mm thickness (ferrous and nonferrous) with normal 10 mm ball indentor and extra double - cone indentor and four - language instruction manual. MODEL : PHM - II Note : Spare hardness test bars are available for both the above Models. MODEL : BAR

Applications: For testing indentation hardness of soft vulcansied rubber and other elastomeric materials. It is particularly suitable for testing in areas inaccessible to a conventional dial type Durometer. Range : 0 to 100 Shore-A nos. on a Vernier Scale graduated in steps of five with interpolation to two points attainable with normal vision. Standards : conforms to the revised German Standard DIN-53 505 & American Standard ASTM D22420 Technical Data: Indentor :Truncated Cone. Vernier Scale : Graduated in steps of 5 with visual interpolation to 2 Shore points. Packing : In a wooden box. Dimensions : mm 12.5dia 114 long. Nett Weight : g 60 MODEL : SHR - A - PEN

Profile Gauge (Contour) 150 mm MODEL : PG - 150

Profile Gauge (Contour) 300 mm MODEL : PG - 300

Magnetic pencil type thickness tester for non-destructive measurement of non-magnetic coatings on steel and iron.

RANGE : 1000 microns / 0-400 th.

MODEL : PTT

Pin - Brino (Dynamic) metal hardness tester based on the principle of pin shearing with hammer blow, complete with Magnifiscope measuring magnifier. Spare pins are available in packets of 500 pins MODEL : DHM

"Poldi" type impact hardness tester for metals (ferrous as well as nonferrous) with 10 mm Brinell ball indentor and with Magnifiscope, supplied with instruction manual in four languages Viz., English, German, Portuguese ,Russian. MODEL : PHM Note : Spare hardness test bars are available for the above Model. MODEL : BAR

Portable Thickness Gauge

Handy and portable type in followings

For Diamond Industry
a)DG - 11 (10 x 10 mm)
b)DG - 22 (20 x 20 mm)

For General Purpose
c)DG - 12 (10 x 20 mm)
d)DG - 25 (20 x 50 mm)
Least Count 0.1 mm

Portable Thickness Gauge Handy and portable type in followings For Diamond Industry a)DG - 11 (10 x 10 mm) b)DG - 22 (20 x 20 mm) For General Purpose c)DG - 12 (10 x 20 mm) d)DG - 25 (20 x 50 mm) Least Count 0.1 mm

Profile Gauge (Contour) 150 mm

MODEL : PG - 150

Profile Gauge (Contour) 300 mm

MODEL : PG - 300

Rock - Cy portable type hardness tester for Rockwell - C Range: 22 to 67 HRC ,accuracy : + 1 HRC MODEL : Rock-Cy Rock - By portable type hardness tester for Rockwell - B Range: 40 to 100 HRB ,accuracy : + 1 HRB MODEL : Rock-By

RCM portable type hardness tester for Rockwell - C (like superficial) hardness. Range : 22 to 67 HRC , accuracy : + 1 HRC MODEL : RCM RBM portable type hardness tester for Rockwell -B (like superficial) hardness. Range : 40 to 100 HRB , accuracy : + 1 HRB MODEL : RBM Spare calibrated load cell is available for both RCM and RBM.

Sklero Tester Rebound hardness tester on the sklero principle for finding the Shore-D, Rockwell B&C and Brinell hardness as well as tensile strength of hard metals. MODEL : SKM

Portable Screen tension meter (SERIMETER) for nylon, polyester, steel mesh.

Range : 5 - 50 N / cm.

MODEL : TSC

Portable Screen tension meter (SERIMETER) for nylon, polyester, steel mesh. Range : 5 - 50 N / cm. MODEL : TSC

Contestor - Long feeler arm type tension
meter to measure small pressures.

MODEL : CTT - Hi
Range  : 50-500 , 100-1000 , 200 -2000 g.

Contestor - Long feeler arm type tension
meter to measure small pressures.

MODEL : CTT - Lo
Range  : 1-10 , 2-15, 3-30 ,5-50,
              10-100, 15-150, 25-250 g