Our arc welding machine is provided at 160 to 200 AMP with commendable static and dynamic characteristic. This machine is very easy in operation and requires less maintenance. Further, our product comprises following features:

• High open circuit Voltage
• Staples regulation of current
• Good protection against weather

Following are its specifications regarding its technical aspects:

Specifications:
Model BMA 200-25

Current Range	200AMP
Volt	230V; Single Phase
For welding Electrodes Dia	2.5mm
Transformer Cooling	Force Air
Weight	25 Kgs

Model BMA 200-30

Current Range	200AMP
Volt	230V;Single Phase/Tow Phase
For Welding Electrodes Dia	2.5 –3.15mm
Transformer Cooling	Force Air
Weight	35 Kgs

We manufacture rectifier welding machine which is available in range of up to 600 AMPS. This machine is designed in such a manner so that it provides stable arc while welding with different electrode sizes and metal.

Features:

• Good static and dynamic characteristics
• Quiet and spatter-free arc throughout the entire welding rang.
• Step less regulation of current
• Three phase full wave bridge circuit giving steady wave from with minimum ripple
• Good quality semiconductor devices to ensure durability
• Protective circuit for protection of silicon diodes against surges.
• Forced air cooling
• Less maintenance requirements.
• Perfectly matches to the latest international standards.
• Available in tailor made solution(SPM) Special Purpose Machine.

Specifications:

Model No.		BSPL200R	BSPL300R	BSPL400R	BSPL600R
Welding Current Range	Amp	40-200	60-300	80-400	100-600
Max.cont. Welding @60% Duty Cycle	Amp	200	300	400	600
Max.auto Welding Current At 100% duty cycle	Amp	155	230	310	460
Open circuit voltage	V	78	78	75	75
Supply Source 50Hz.	V	415 V. Three Phase, 50 Hz
Input Power At 60% Duty cycle	KVA	14-0	21	27	45
Switch Fuse	A	25	35	40	70
Welding elector dia.	Mm	1.6-4	5-Feb	5-Feb	2-6.3
Class of insulation		F	F	F	F
Weight	Kgs	190	280	320	450

Our Tig welding machines are available up to 400 AMP. These machines are adaptable to both manual and automatic operation and can also be used as continuous weld, intermittent weld and spot weld. Tig welding machine is basically used for steel, alloy steel, heat resistance alloys, cooper, nickel and their alloys.

Features:

• Step less regulation of current
• Excellent static and dynamic welding characteristics
• Three phase full wave bridge circuit, giving steady wave with minimum ripple.
• Less consumption of power
• Easy in starting along with built in high frequency unit.
• Good quality semiconductor devices to ensure long life.
• Perfectly matching to the latest national standards
• Available in tailor made solution(SPM) Special Purpose Machine.

Following are its technical specifications:

DC TIG & AC TIG
Model No		BSPL200DT	BSPL300DT	BSPL400AT	BSPL300AT	BSPL400AT
Welding Current Range	Amp	40-200	50-300	60-400	40-300	60-400
Max. cont. welding @ 60% Duty Cycle.	Amp	155	230	305	230	305
Open circuit Voltage	V	78	78	75	90-100	90-
Supply Voltage 50 Hz	V	415 V Three Phase, 50 HZ and 415, 3 phase
Input Power at 60% Duty Cycle	KVA	14	21	27	27	36
Switch Fuse	A	16	30	40	60	80
Mains Cable, Copper	sq.mm	3x6	3x12	3x16	3x20
Current Variation	Continuous

We offer multi spot welding machine which is provided in the range up to 15 to 250 KV. This equipment is a heavy duty steel fabricated body giving minimum fatigue. It can work for long hours and continuous use. The machine less troubles in maintenance. All the components are very easy in reach and can be easily replaced within a short time. The process of welding starts only after pressure is applied to the job. Other than this, following are its other outstanding features:

• Sturdy ram made of ground stainless steel permits high speed
• Weld sequence control with squeeze, weld, hold & off.
• Precision weld timer with SCR control
• Controlled movement of upper electrode eliminating hammer blow on job.
• High speed operation i.e. up to 140 SPOTS/MIN
• Robust “C” steel frame assembly.
• Nugget formation assured.
• Good and consistent welds
• Available in tailor made solution(SPM) Special Purpose Machine.

Specifications:

MODEL		BPS-50	BSP-75	BSP-100	BSP-150	BSP-200
Rating @50% Duty cycle	KVA	50	75	100	150	200
Rating @100% Duty cycle	KVA	35	52	70	100	140
Primary voltage 2Ph.	V	415	415	415	415	415
Standard stroke	mm	75	75	150-400	150-600	150-700
Min. max force	kg	150-400	150-400	150-400	150-400	150-400
Air supply pressure	kg/sq.cm	4	5	5	5	5
Water flow	L/Min.	40	40	60	60	70

Available in tailor made solution(SPM)

We offer seam welding machine which is available in the range up to 250 KVA. This equipment is pneumatically operated seam welding machine, for an uninterrupted weld run. Our product is air operated and is of modern design. These can incorporated at a variety of alternative feature ensuring that a suitable machine is available for every seam welding application within the range.

Features

• Leak proof joints at much lower costs than conventional welding.
• High quality roller bearings carrying the roller shafts which guarantee durability of the roller bearings
• Sturdy drive shafts gives non slip drive.
• Minimum wear of the electrode wheels due to efficient cooling system.
• Fan cooled transformer having core of high-grade silicon steel.
• Thyristorised heat control.
• Heavy duty high speed operation
• Available in tailor made solution(SPM) Special Purpose Machine.

Specifications:

Model no.	BSPL50SEAM	BSPL75SEAM	BSPL100SEAM	BSPL150SEAM
Supply voltage at 2 phase 50Hz	415 Volt	415 Volt	415 Volt	415 Volt
Continuous Rating of transformer	35 KVA	55KVA	70KVA	105KVA
Nominal Rating At 50% duty cycle	50KVA	75KVA	100KVA	150KVA
Switch fuse	150 AMPS	200 AMPS	300 AMPS	400 AMPS
Current Taps	4 NO’S	4 NO’S	4 NO’S	4 NO’S
Insulation Class	F	F	F	F
Cooling	Forced air cooled	Forced air cooled	Forced air cooled	Forced air cooled
Operative Mechanism	Pneumatics	Pneumatics	Pneumatics	Pneumatics

Our mig welding machine are available with 2 track, 4 track & spotting facility range up to 600 amps. The MIG/MAG (CO2) Welding machine can be operated for all metal working factories. This machine is perfect for high productivity for protective job, structural welds, pipe/tube welding and nozzle and surfacing with excellent welding for short and spray arc. Our product is absolutely suitable for unalloyed and alloyed steel. Not only this, our product comprises following characteristics:

• Three phase full wave bridge circuit for study wave forming with minimum response time.
• High arc stability with auto choke,
• To be used for minimum sheet thickness of 1mm,
• No formation of slag
• Concentrated heat application
• Near endless welding without change of electrodes
• Available in tailor made solution(SPM) Special Purpose Machine.

Specifications:

Model No		BSPL300M	BSPL400M	BSPL600M
Welding Current Range	Amp	30-300	40-400	80-600
Max. Cont. Welding @ 60% Duty cycle.	Amp	300	400	600
Open circuit Voltage	Amp	20-48	23-63	25-67
Supply Source	---------------415 V. Three Phase,50 Hz ------------
Switch Fuse		TP-30	TP-40	TP-60
Continuous / Max. Input	Kva	10.3/14.4	17.9/25.2	28.4/40.2
Insulation Class	-----------------------CLASS ‘F’------------------------
Cooling	--------------------Forced Air Cooled------------------
Max. wire size	Dia. mm	0.8-1.2	0.8-1.6	1.0-3.2

Available in tailor made solution(spm)

Our CD projection welding machines basically operate on the principle of capacitor discharge. The welders use fabricated frame structure for housing the capacitor banks, control circuits charging and discharging transformers. The welding electrodes are mounted in C-shaped quick response press mechanism and electrode movement is hydraulically/pneumatically operated. Conservative design and use of proven components like electrolytic capacitors,
solid-state switches, ensure long welding life and ease of operation. All recommended electrode materials is suitable for these welders.

Further, it comprises the following features:

Advantages

• Large scale reduction in KVA Demand
• No requirement of water cooling
• Machine can run on generator
• No effect of voltage fluctuation on weld quality
• Welding of similar and dissimilar metal possible
• Join free blacking and discoloration
• Cost of manufacturing is less
• Less maintenance of fixture and electrodes required
• Available in tailor made solution(SPM) Special Purpose Machine.

We are providing compact sized wall mounted or floor mounted fully micro presser control, energy utilize system for all small installation. This has connected load up to 200 HP, available in 30,40,50,60 & 70 Kvar. Our other versions up to 1000 Kvar are also available with this system are very well working at various utility and industrial companies over last few years. Following are its other advantageous features:

Advantages

• Reduced current from EB or DG Set
• Reduced energy bill
• Increased extra availability of power.
• Reduction in losses by reduction in current
• Longer life of conductor motor, transformer by reduction and heating losses
• Optimum uses of power drawn
• Desired VAR reactive power compensation and maintain the system power factor close to unity
• Operates within acceptable level of 5% total harmonic distortion of current and voltage
• Undisturbed operation of the system loads.
• Available in tailor made solution(SPM) Special Purpose Machine.

Our SVAR & GVAR capacitors have a long life cycle up to 100000 hrs and have highest pulse current whistle capability (200 X IN). Our capacitors are even corona free and are very easy in handling. As long as their safety precautions are concerned, we are equipped following safety features:

• Dry type design
• Self healing type
• Over pressure disconnecter
• Non inflammable
• Touch proof terminal

Our product also comprises some striking feature regarding its mounting application and general environment. They are:

Mounting

• Reduced cost of mounting
• Mounting can positioned in any way
• Less maintenance

Environment:

• Easy in disposal.
• Non polluting on PCB
• Eco- friendly

Further, it consists of following features:

Specifications:

Capacitors From	1 KVAR to 25 KVAR @440V, 50Hz 3 Phase
Capacitor Bank From	1 to 500 Kvar.
Terminals	Threaded for secure connection. Leak free gasket seals. 10KVA stand off terminal bushings.
Dielectric Fluid	Wet cells-Eccol, lll B liquid NFPA classification.
Flash Point	+212 C. Fire Point: +260 C
Dielectric Film	polypropylene

We are trusted name in manufacturing and supplying qualitative harmonic filters. Our product is basically used for saving power. Further, these filters comprise certain feature which have made us preferred company to work with. Following are their features:

• Custom made
• Used in APFC Panel(automatic power factor connection)
• Up to 30 stages

Our gathering and heating equipment is used for gathering rods so as to increase size. Basically, these machines are used in forging components. These machines are made of Ms rods and can be provided with customization. The Kva of these machine depends upon rod size.Available in tailor made solution(SPM)

We also deal in the electrostatic oil cleaner which is an super oil cleaning equipment involving static charging of ionized suspended solid contaminants in fluids and oils and collecting them on an enormously spread surface of di-electric media. The cleaning process is carried out off-line which means the parent machine does not have to be shut down.

Advantages:

• Reduces operating cost and improves efficiency through periodic submicronic filtration.
• Prolongs oil life and eliminates oil change.
• Improves the MTBF of precision machine components like servo valves, moog valves, pumps and sliding mechanisms.
• Avoids back pressure and subsequent back flow of contaminants due to clogged filter element.
• Reduces machine downtime and system warm up periods.
• Cleans oil without stopping the production process.
• Improves life of the hydraulic system components.

Specifications:

Model	MEOC-25	MEOC-50	MEOC-100
Cleaning Tank Capacity	25 litres	50 litres	100 litres
Overall Dimensions (mm)
Length	550	630	740
Width	475	520	640
Height	750	860	940
Approximate Weight (kgs.)	75	90	130
Pump Details	Tushaco make Trochoidal Design Internal Gear Pump
Pump Capacity	3-4 LPM		10-12 LPM
Motor	0.25 HP @ 1500 RPM, 1 Ph., 230 V, or 3 Ph. 415 V		0.5 HP @ 1500 RPM, 1 Ph.,230 V, or 3 Ph. 415 V
High Voltage Power Pack Output	Upto 6 KV D.C.		Upto 12 KV D.C.