We supply wide range of oil filter which is used to decontaminate oil that contains suspended impurities. A major application is in forming part of the lubrication system of engines in which filters are typically detachable units due to the need for regular service or replacement. The filtration of oil in engines is essential for enhancing longevity and performance of the vehicles. It is widely used in automobiles industries.

We offer quality and engineer precision oil nozzles and regulation nozzles which are suitable for different kind of burners. These nozzles are available in different sizes. Our products are properly packed for defect free delivery. We supply our products in minimum lead time.

We offer electronic transformers and ignition transformers in different makes like Fida, Cofi, Bhrama, Danfoss, Nec, Calvin etc. These Transformers are engineer precision to provide heavy duty and high performance. We can supply these transformers in the minimum lead time thus making them easily available to our clients.

We offers wide features electronic sequence controller, which can operate on different control elements at predefined time and sequence stage, and user definable programming through figure touch keyboard or thumb wheel. Our keyboard programming model has all higher flexibility in sequence and time controlling whereas thumb wheel programming has simplicity. Control timings for sequence operation vary from milli second to seconds or minutes. In our electronic sequence controller data and process status is stored during power fail and it displays the sequence stage, output status and run time of present stage. It is compact, advance and most accurate instrument. We provide various kind of sequence timer cum controller for different applications.

We supply high quality oil pump which is designed to supply pressurized oil to a closed system. In automotive engineering, an oil pump is part of a lubrication system, transporting the oil to various moving parts inside the engine and in hydraulics, the oil pump is used to deliver mechanical energy to remote actuators via tubes, pipes and hoses. Our range of oil pumps are highly efficient and durable to provide high performance. We procure oil pumps from the reliable and reputed manufacturers of the oil pumps.

We supply good quality triplex pumps, which are positive-displacement reciprocating pumps that are configured with three plungers. It is the most common configuration of pump used in both drilling and well service operations. Triplex pumps used in well service activities generally are capable of handling a wide range of fluid types, including corrosive fluids, abrasive fluids, and slurries containing relatively large particulates. A triplex pump is a common component in large-capacity commercial car wash equipment.

This pumps are also suited to pump liquids other than fresh water or wastewater. They can be used to pump salt water in desalination applications, chemicals, and high vapor liquids like carbon dioxide.
It can also be configured to pump mud in land-based or offshore oil drilling applications.

The hot air generator that we supply are compact, rigid, noiseless, fully automatic and easy to operate. Its running cost is much lower than the thermic fluid and steam heating and it is economical at all the levels. This generator also has low initial cost and it is cent percent depreciated in the first year.

Some of the features of our hot air generator are:

• Reverse flame technology
• S.S 316 heat exchanger
• Automatic firing control
• High efficiency imported burner
• 30-50% saving as compared to thermic fluid heater
• Oil or gas fired
• Capacity 50.000 K.Cal/Hr. To 15,00,000 K.cal/Hr

Our gas burner assures a low emission polluting substances and, a perfect working security imported burners can be installed in all heat generators and modern boilers with high combustion chambers furnaces, chemical industries, textile units large/ small industries, dairies, bakeries etc. Imported burners also produces special rigid fully automatic for melting furnaces application. The construction permits easy access to all components ensuring easy maintenance.

We offer high quality feed water pumps which is used to pump water into a steam boiler. The water may be freshly supplied or returning condensate produced as a result of the condensation of the steam produced by the boiler. These pumps are normally high pressure units that use suction from a condensate return system and can be of the centrifugal pump type or positive displacement type.

We supply pumps in wide range of size, that is up to many horsepower and the electric motor is usually separated from the pump body by some form of mechanical coupling. Our feed water pumps usually run intermittently and are controlled by a float switch or other similar level-sensing device energizing the pump when it detects a lowered liquid level in the boiler. The pump then runs until the level of liquid in the boiler is substantially increased.

Some of the features of our feed water pumps are:

• DB Both side bearing
• OTHERS One side bearing
• SHAFT 410 Stainless Steel
• IMPELLER Maganese Bronze
• PUMP CASTING Closed Grained Cast Iron
• RMP OF PUMP 1440

In our thermic fluid heater a liquid phase heating system are designed to heating thermic fluid up to 300o C at near atmospheric pressures, with efficiency as high as 87% on NCV of oil and are available in different capacities. We offer thermionic fluid heater which are high in performance and are completely safe.

Advantages of our thermic fluid heater are:

• Fully automatic thermic fluid heater - The temperature and the combustion are automatically controlled
• No attendant required
• Higher efficiency - the heater operates at a very low pressure near atmospheric pressure
• Non-IBR Hence no need to shut down the system for statuary inspection
• Low investment
• Fuel saving
• No corrosion or scale formation - The thermic fluid used in the system is non - corrosive and completely free from any suspended or dissolved solid

Our Digital Temperature controllers, are designed to measure, display and control temperature, of furnaces over wide range, with high accuracy. Different sensors are used for desired temperature control range. In our temperature controller use of proportional controller minimizes overshoot and undershoot of the furnace and completely eliminates contact problem associated with relay and contactors. The measured temperature is displayed on digital LED display.

Standard features of our controller are:

• Automatic cold junction compensation (Thermocouples)
• Broken sensor indication & sensor linearization using DFG techniques are the standard features

Our range of hot water boiler are useful in hotels, hospitals, large residential premises, swimming pools, farm houses, resorts etc. It can also be used as central heating system very efficiently. It is a compact, rigid, noiseless & fully automatic hot water boiler slashes your power bills as well as there is no need of any skilled person to operate it.

Our hot water boiler comes with the following specifications:

• Capacity: 50,000 to 15,00,000 K.Cal/Hr
• Temeperature: Upto 200 Degree Centigrade Oil/Gas Fired