We are offering ourclients a wide range of industrial paints that includes enamel paints, chlorinated paints,polyurethane paints, heat resistant paints, road marking paints and chimney paints.
Chimney Paints
We provide chimney paints, which are manufactured from silicone resins pigmented with aluminum flake for usage at more than 500°C. Our paints are widely used in buildings, factories and structures. These can withstand adverse weather conditions and will not fade for long years.only looking navi-mumbai&mumbai area.
With the help of our modern manufacturing facility, we manufacture chlorinated paints. This includes BPL Hi- Build Chlorinated Paints. (All Shades) and BPL Hi- Build Zinc Based Primer for Chlorinated Paints. These are specially formulated to withstand harsh interior and exterior condition including oil, harsh chemicals, salt water and fungus. Our chlorinated paints are suitable for use on wood, non ferrous metals, iron and steel, concrete, brickwork and plaster. only looking navi-mumbai&mumbai area.
We are providing decorative enamel paints to our customers. These are widely applied as a finishing coat for exterior of steel or wooden surfaces exposed in mild to moderate corrosive environment. Decorative enamel is our first qualitative synthetic enamel, which is glossy enamel based on synthetic resin vehicle and stable weather resistant pigments.
Our enamel is designed for both decoration and protection from internally as well as externally. Before applying it, the surface should be clean, dry and free from grease and oil. This is a suitable finishing paint for new and old work on metal, wood, brick, cement, plastered concrete and fiberboard which is applied over proper priming schemes. It gives a tough abrasion resistant coating to have excellent durability and gloss retention in country-side, marine and industrial atmospheres. It is oil resistant. The suitable paints for different surfaces and application details are given below:
Steel: Synthetic Zinc Phosphate / Synthetic Zinc Chromate Primer
Aluminum and Galvanized Iron: Epoxy Etch primer
Wood & Fibre-board: Synthetic Pink Primer or Aluminum Primer.
Cement & Brick: Synthetic Wall Neutralising Cement Primer
Method of application: Brush, Roller, Spray
Notes on Airless Spray: Tip Range 13-19 thou. Total Output fluid pressure 2500 - 3000 psi. (176 - 211 kg/sq. cm.)
Thinner : G.P.Thinner No.1
The product information is as follows:
Color :
All Shades
Finish :
Glossy
Flash Point :
Above 30°C
Volume Solids :
38% approximately
Recommended dry film thickness:
25 microns per coat
Corresponding wet film thickness :
66 microns
Theoretical Spreading Rate :
15.2 Sq. meter Per liter
Drying time :
Surface dry - 4 hours, Hard dry - 18 hours
Interval before Over coating :
Minimum - 18 hours
Storage life:
Up to 12 months so long as the material is stored in sealed containers under standard warehouse storage conditions.
Supported by our efficient team of personnel, we manufacture heat resistant paints to our customers. Our heat resistant aluminum paints can resist heat up to 250°C. These are available in high lustre two pack aluminum paint with remarkable protective properties. Our paints can be used as heat resistant coating for chimney stacks, Pipes, Petro-Chemical & water tanks, boiler fronts, duct work, piping and furnace structure. These paints give good performance in external and internal application in offices, buildings, factories, warehouses and industrial plants. Due to its higher reflectance value, this paint has special use in coating exterior of storage tanks in oil industry
Surface Preparation:
Steel surfaces:
Surface should be perfectly clean and dry before painting. Degrease and blast clean to Sa 2½ grade minimum of Swedish specification SIS - 05 - 5900 - 1967. If blast cleaning is not practical make full use of mechanical tools along with manual cleaning and wire brushing to remove loose rust/scale to St 2 or St 3 grade of Swedish Specification. As heat resistant coating above 100°C, paint to be applied directly on cleaned metal surface free from any rust and remnants of any old coating. For other uses (Below 100°C) the paint should go on appropriate primers.
We offer polyurethane paints including polyurethane aliphatic finish. These are available in a two pack aliphatic acrylic polyurethane high gloss top coat with excellent weathering resistance and color retention properties. Due to its toughness and chemical resistance properties, it finds extensive use in coastal and chemical environment. Our paints are widely used in fertilizer plants, oil refineries, petrochemical units, marine installations, chemical plants, transportation industries, power plants, rail coach & chemical wagon exteriors and offshore structures.
Following are the preparation for various surfaces:
STEEL SURFACES:
Surface should be perfectly clean and dry before application of appropriate primer. Degrease and blast clean to Sa 2½ grade minimum of Swedish specification SIS - 05 - 5900 - 1967. If blast cleaning is not practical make full use of mechanical tools along with manual cleaning and wire brushing to remove loose rust/scale to St 2 or St 3 grade of Swedish Specification.
CONCRETE SURFACES:
For new concrete surface: Make sure that the surface is cured for minimum 2 months. Remove laitence, loose surface powder by light sand blasting. If blast cleaning is not feasible, roughen the surface by acid etching with 10% Hydrochloric Acid solution followed by thorough freshwater hosing to remove any residual acid. The surface should be perfectly dry and clean before application of appropriate primer.
For old concrete surface: Remove grease, oil etc by solvent wiping. Remove water-soluble contaminants by fresh water hosing. Roughen the surface by acid etching, if light sand blasting is not feasible. The surface should be perfectly dry and clean before application of appropriate primer.
Method of application:
Conventional Spray / Airless spray .Brush/ Roller for touching up small areas only.
With the help of our advanced manufacturing facility, we make road marking paints. These paints are acclaimed for their feature of heavy abrasion resistance. We can provide our marking paints in various quantities as per the requirements of the customers. Our different type of paints for different colors is given below:
BPL Hi- Build Road Marking Paints. (Solvent Thinnable) White / Golden Yellow
Advance Chemical Sales Corporation, Delhi Manufacturer and supplier of chemical powder which includes graphite powder, crystalline graphite powder, pure graphite powder, allotropic graphite powder and industrial graphite powder.
Shield Coating, India Manufacturer and supplier of paints, cement paints, colored paints, house paints, house interior paints, house exterior paints, commercial paints, decorative paints, plastic paints, wall putty and industrial paints.
Processing...
