 |
|
Electronic Equipment
|
We at Bright Electronics are one of the preeminent manufacturers and suppliers of high quality electronic equipment. Flawlessly designed in accordance with OEM's specifications, our range includes electronic equipment, control panels, dental & medical electronic products, digital panel meter, digital position controllers & stimulators and many more. Complying international quality standard, these equipment can be availed as per the specifications and demands of our clients.
|
|
|
Dental And Medical Electronic Products (OEM Kits) Complying the
specifications of leading OEMS, our range of dental electronic products and medical
electronic products (OEM Kits) is encountering wide demand in the Dental and medical. The material used in manufacturing these electronic
equipment is of superior quality and ensure their flawless quality.
Our proficiency lies in developing them as per the specific needs of
our clients.
A. Specification of Dental
Electronic Control Cards:
- Power supply card for
micro Motor Model No. BE-5900
- Suction timer for
suction units Model No. BE-9200
- Dental Chair motor
control unit for programmable and non-programmable
- Dental Chair motor
control unit for single motor (Seat up/Down)
- LED X-ray Viewer
- Micro motor control
unit with foot control. Model No. BE-750
- Brush less micro
motor control unit. (BLDC) Model No. BE-11K5
B. Specification of
Medical Electronic Products Model No. BE-8900
- Temperature control
system for incubator
- 128 × 128
Graphics LCD Display
- RS 232 Interface
- Real time clock
- Proportion heater
control
|  |
 |
|
 |
|
|
24 Column Printer We manufacture and supply
a wide range of 24 column epson M-190G printer mechanisms and control
cards, which find application in industrial monitoring &
automation, consumer electronics and other areas. Manufactured in
tune with international quality standard, these 24 column printers
are available in standard as well as customized specifications.
Features: Model No. BE-10K Specifications:
- Size : 53(W) ×
73(L) × 20(H) mm
- Data Input : RS232C
Serial or TTL
- Control Functions
: Paper Feed and Self Test
- Power Supply :
+5VDC, 200mA when not printing & 2A (average)
- When printing,
Peak current 4A.
- Character Set : 96
Characters ASCII (As shown below) :
! " £ $
% & ' ( ) * + , - . / 0 1 2 3 4 5 6 7
8 9 : ; < = > ? @ A
B C D E F G H I J K L M N O
P Q R S T U V W X Y Z [
\ ] ^ _ ` a b c d e f g h i j k l m n o p q r s t u v w x
y z ° # ~
- No. of Columns : 24
in normal mode
- Connectors : 20
pins Relimate for mechanism.
- 7 pins Relimate for
power and serial data.
- 4 pins Relimate for
control signals.
- Jumpers : 3+3 Jumper
for RS232C and TTL selection
2+2 Jumper for baud rate
- Temperature : 0 to
+50º C
- Humidity : 0 to
90% RH (Non Condensing).
| |
|
|
|
|
|
Control Panels With the customer
satisfaction at the core of our organization, we offer a
comprehensive range of best quality control panels for industrial
automation (Model No. BE-PAN). Developed using compliance
components, these control panels are known amidst our clients for
their long lasting trouble free services. Specification of Control
Panels (For Industrial Automation)
- Panels for Valve /
Dampers position control having single phase or three phases
actuators.
- Panels for
controlling the temperature of furnaces, killens and other
temperature based systems
- Panels for speed
controlling for conveyors having AC or DC drives.
- Custom built panels
using Programmable logic controllers as per the requirement
3Phase Actuator Control
Panel Specifications
- Supply Voltage
: 3phase 415 VAC 50 Hz.
- out put Voltage
: 3ph.415VAC, reversible O/P for 3ph
Actuator Motors
- Display indication
: 0-100% Display indication each for 3
Actuators, close to open.
- Indicators
: R, Y, B phase indication. Valve opening,
Closing indication, valve full open, full
close
Indication, Torque trip indication.
- Selector Switch
: Auto / Manual operation selection provided.
- Automode
: In auto mode valves can be operated through external I/P Signal of 4-20mADC, 0-1DV DC or 0-10VDC potential free Contacts.
- Manual Mode
: In manual mode the valves can be operated
Through OPEN/CLOSE push buttons
Provided on the panel.
- Control O/P
: 4-20mA O/P is provided for 0100%
opening of the valve for remote indication
- Remote Control
: In manual mode provision is there to
Connect external push button for remote
Operation.
- Interlocking
: There is interlocking between 1st and 3rd
Valve.
- Liquid level sensing:
The 2nd valve gets on only if the liquid
Level is in required level
- Protection
: MCB is provided for mains supply. Fuses provided for each motor, over torque trip & Thermal over load relay provided
- Emergency OFF/STOP
switch : Emergency OFF/STOP, turn to release type
Push button provided.
- Single Phasing
: Single phase preventer is provided. preventer
- Low pressure
: If the pressure at the outlet of the pump
- Protection
drops lower than required level valve 2 Trips
| |
|
|
|
|
|
Digital Panel Meter Avail from us high grade
digital panel meter (DPM), which are available in Model No. BE-900
and BE-777. These meters can also be availed in different forms as
per the dimensions and other specifications sent by our clients.
These meters match with international quality standard and offered by
us in proper packaging for their safe delivery to our clients. A. Specification of
Digital Panel Meter (DPM) Model No.BE-900
- Range : 0-999,
0- 199.9
- Input Prefixed : 4 - 20 mA, 0 - 1Vdc, 0-10Vdc, 0-230Vac
- Size : 96 ×
48 × 100 mm
- Application: Used
as Volt meter, Ammeter Temperature Indication,
Pressure Indicator etc.
- Operating Voltage:
230 VAC +/- 10% 50 Hz
- Temperature: 0 to
+50º C
- Humidity: 0 to 90%
RH (Non Condensing)
B. Specification of Dual
display miniature DPM : For Volt Meter & Ammeter Model No. BE-777
- Range: Voltage -
Current 0-199.9 V.
- Input : mV I/P
and Shunt or CT I/P.
- Application: Used
as Volt meter, Ammeter Temperature Indication,
Pressure Indicator etc.
- Operating
Voltage: 12 VDC.
- Size:
40 × 20 × 20 mm
- Temperature: 0 to
+50º C
- Humidity: 0 to 90%
RH (Non Condensing)
| |
|
|
|
|
|
Digital Position Controllers & Stimulators We manufacture and supply
best quality digital position controllers and digital current
simulator, which have got wide eminence amidst our nationwide
clients. Featuring sophisticated technology and dexterity of our
team, these controllers & stimulators are available in standard
as well as customized forms. A. Specification Of
Digital Position Controllers Model No. BE-8100
- Range : 0-100 %
- Control I/P: 4-20
mA, 0-1VDC, 0-10VDC
- Feed back I/P:
Resistance Feed back, 4-20 mA , 0-1VDC, 0-10VDC
- Control O/P: Supply
to the motor for forward and reverse
motion, or potential free
contacts.
- Keys Provided: Auto /
Man selection, Open and Close
- Auto mode: Controls
valve / Damper operation according to the control
I/P given.
- Manual mode: Valve /
Damper can be operated using front panel Open
and Close keys.
- Feed back out put:
4-20 mA, 0-1VDC or 0-10VDC for 0 to 100% travel.
- Supply voltage: 24
VAC, 110 VAC, 230 VAC as required.
- Size: 96 ×
96 × 100 mm
- Temperature: 0 to
+50º C
- Humidity: 0 to 90%
RH (Non Condensing).
Specification of Digital
Current Simulator (Source) Model No. BE-3100
- Range: 0-30.00 mA.
(4 digit display)
- Coarse Adjustment:
0.30 mA, resolution 1 mA.
- Fine adjustment:
0.01 to 0.99 mA, resolution 0.01 mA
- Keys : Feather
touch Coarse and Fine adjustments using increment
decrement keys on the
front panel
- Size : 96 ×
96 × 100 mm
- Operating Voltage:
230 VAC +/- 10% 50 Hz
- Temperature: 0 to
+50º C
- Humidity: 0 to 90%
RH (Non Condensing).
| |
|
|
|
|
|
Digital Timers And Counters Driven by an philosophy of
total customer satisfaction, we offer premium grade digital timers
and counters, which are manufactured keeping into consideration the
application standards of diverse industries. These digital timers and
counters offer long lasting trouble free services and offered by us
at cost effective prices. Digital Timers and
Counters Model No. BE-2600 A. Specification of
Digital Timers Model No. BE-2600T
- Range: 0-9999-
Mili Seconds, Seconds, mins, hours
- Types: On delay,
Off delay
- Mode: Cyclic or
Normal
- Setting: Through
front panel keys, range, type and mode can be
select. In cyclic mode
different timings can be set for ON time and OFF time
- Out put type:
Relay contact.
- Indication:
Power On, Relay ON/OFF Indication (LED)
- Start/Stop Function
: Terminals provided at the back panel for Remote
Start/Stop switch
- Size : 72 ×
72 × 100 (mm)
- Operating Voltage:
230 VAC +/- 10% 50 Hz
- Temperature: 0 to
+50º C
- Humidity: 0 to 90%
RH (Non Condensing).
B. Specification of
Digital Preset Counters Model No. BE-2600C
- Range : 0.9999
- Input :
Proximity, Photo Switch, Encoder, Potential free contacts
- Output : Relay
Contact
- Setting: Using
front panel keys required range can be set.
- Mode : UP count or
DOWN count can be set
- Size : 72 mm ×
72 × 100 mm
- Operating Voltage:
230 VAC +/- 10% 50 Hz
- Temperature: 0 to
+50º C
- Humidity: 0 to 90%
RH (Non Condensing).
| |
|
|
|
|
|
PMDC Motor Drive We specialize in
manufacturing and supply of high grade PMDC motor drives, which are
available in standard and customized specifications to meet the
demands of different clients. These drives are manufactured under the
supervision of expert technocrats and hence they provide the end
users high performance for long duration. Specification of PMDC
Motor Drives Model No. BE-5700
- Operating Supply:
24 VAC
- O/P Speed Adjust:
0 to 24Vdc Linear Adjustment with Pot
- Protections:
Over Load, Over Voltage, Short Circuit, Fuse
- Drive: High
speed PWM, with thrust control.
- Capacity: 10 A
/240 W
- Size: 120 ×
80 mm
- Temperature: 0 to
+50º C
- Humidity: 0 to
90% RH (Non Condensing).
| |
|
|
|
|
|
Seqeuntial Timer We offer a wide range of
high quality seqeuntial timers, which are characterized by
uncompromising quality and best performance in any condition. Use of
finest quality of materials set these seqeuntial timers apart from
others. We have competence to offer them as per the specifications
sent by our clients. 20 CHANNEL SEQUENTIAL
TIMER Model No. BE-3300 Specification:
- Operating
Voltage : 110VAC/ 230VAC 50Hz
- Output Voltage to
Solenoids : 48 VDC/ 230VAC/ 24VDC
- Number of Outputs
(Channels) : 20 Channels
- OFF Time : 0 to
99 Seconds
- ON Time : 0 to
999 mSeconds
- Channel limit : 1
to 20
- OFF Time
indication : Red LED for each channel
- ON Time
indication : Green LED for each channel
- Mode Selection :
Run or Test Mode
- Pressure Switch I/P
Sensing : Potential free NC contact from
Pressure switch
- Enclosure :
495(W) x300(H) x100(D) mm
| |
|
|
|
|
|
Temperature Controllers, Indicators & Recorders When it comes to
manufacture and supply high performance temperature controllers,
indicators & recorders , we are a highly reputed name in the
domestic market. Manufactured from or quality of materials, these
products find application in diverse industries. Further, we can also
offer them in customized forms to meet the demands of our esteemed
clients.
Model No. BE-7000,
BE-9500 A. Specification of
Temperature Controller
- Types: PT 100,
K. J
- Ranges: 0-1200°
C, 0-199.9°C
- Output: Relay
contact, SSR O/P.
- Set points: Single
set point, 2 set point
- Setting: Using
touch button on the front panel
- Indication : LED
indication for O/P ON/OFF, 7 seg LED display for
temperature
- Hysteresis: Can be
set using front panel keys
- Sizes : 96 mm ×
96 mm, × 100mm, ( Model BE-7000)
72 mm × 72 mm
× 60mm, (Model BE-9500)
- Operating Voltage:
230 VAC +/- 10% 50 Hz
Temperature: 0 to +50º
C
- Humidity: 0 to 90%
RH (Non Condensing).
B. Specification of
Temperature Indicator Model No. BE-900
- Types: PT 100,
K. J
- Ranges: 0-1200°
C, 0-199.9°C
- Indication : 7
seg LED display for temperature
- Sizes : 96 mm ×
96 mm, × 100mm,
96 mm × 46 mm, ×
100mm, 72 mm × 72 mm × 60mm,
- Operating Voltage:
230 VAC +/- 10% 50 Hz
- Temperature: 0 to
+50º C
- Humidity: 0 to 90%
RH (Non Condensing).
C. Specification of
Temperature Recorder: Model No. BE 1600
- Types: PT 100
Sensor Input
- Ranges: 0-50.00°
C to 100.00° C
- Indication 2 ×
16 LCD Display
- Record : 24 column
printer for temperature and time print out
- Setting: Feather
touch key operation
- Sizes : Table top
enclosure
- Operating Voltage:
230 VAC +/- 10% 50 Hz
- Temperature: 0 to
+50º C
- Humidity: 0 to 90%
RH (Non Condensing).
| |
|
|
|
|
|
UPS & Inverters (OEM Kits) We are a well established
manufacturer and supplier of high standard UPS & inverters (OEM
Kits) , which find application in various industries. Reflecting the
current technology, these UPS & inverters offer hassle free long
life service. We specialize in offering them as per the customers'
demands.
A. Sine Wave Inverter /
UPS Kits Model No. BE-12K Features:
- Micro Controller
based digital PURE SINE WAVE Home UPS kits are an excellent
Microcontroller Kits to demonstrate the working of a power
electronic system.
- The output waveform
is pure sine wave and the system can have rated load of 800, 1000,
1400VA.
- The charging
mechanism used is constant current-constant voltage. This will
ensure better battery management. Overload and short circuit is
provided both in firmware and hardware.
- The output voltage
is regulated within a range of 210-250 V. The kit runs on a 12V DC
(600 & 800VA) and 24V DC (1400VA) bus and is designed to get
high efficiency Micro controller.
- SMPS based charger
with complete battery management (with multi stage)
- Charges battery from
110v on words.
- Charging current l
amp to 12 amp.
- Pure sine wave
output with and without load.
- BOM cost
considerably equal to square wave design.
- In built temperature
sensor.
- Highest efficiency
for more backup time.
- Synchronized change
over for computers.
- Shorts circuit and
return voltage protection.
- Restart tries 10
times in over load condition.
- Soft start for heavy
load and cold start.
Specifications:
- Range Available :-
600VA and 800VA / 12V, 1400VA /24 V.
- AC Input :- 100
to 285 ± 10V AC (175 to 270V in Home UPS
mode).
- Output Voltage Range
:- 200-250V AC (backup mode).
- Output Frequency :-
50 ± 0.1 Hz.
- Output Waveform :-
Pure Sine wave.
- Transfer Time :-
15-18m Sec. in Home UPS mode.
- Display :- LED
(Mains, charging, charged, inv, OL, BAT,
mode).
- Battery Charger
Range :- 125 to 275 V AC.
- Battery Charging
Current :- 2Amp. to 15 Amp. DC.
- Battery Boost
Voltage :- 13.8 / 14.2 Volts ± 0.1 V.
- Battery Low Off :-
9.6 Volts ± 0.2 V.
- Overload :- Trips
after 10 seconds. Four retries.
- Jumper Selections
for :- Mode, Charging Amp / Boost Voltage
B. Square Ware Inverter /
UPS kits Model No. BE-5K
- Range 12 volts - 600 -
800 VA
- 24
volts - 1000 VA, 1400 VA
- 48
volts - 2000 VA
Features
- Based on highly
reliable microcontroller.
- MOSFET based power
stage with PWM AC output.
- Backup mode
protected against overload, short ckt., etc.
- Automatic overload
reset.
- Over current of
MOSFET's protected within micro seconds.
- Can accept any input
waveform (sine, square, generator etc.)
- Automatic low
battery warning and cut off.
- FUZZY
LOGIC Battery charging control.
- Charging current
variable (2Amp to 15 Amp.)
- Unique home away
feature shuts down backup mode.
- Displayed on LED's /
LCD.
Specifications:
- Range Available:-
600VA and 800VA / 12V, 1000VA and 1500VA
/24 V, 2500VA / 48V.
- AC Input :- 100
to 285 ± 10V AC (175 to 270V in
| |
|
|
|
|
|
Water Level Controller We offer an extensive
range of super grade water level controllers, which are manufactured
by us quality probed materials to ensure their superior
functionality. These water level controllers are durable and come in
latest design to cater to the demands of different industries. We
offer them in standard as well as customized forms at market leading
prices. Water Level Controller
Model No. BE-3800 Technical Specifications
- Operating
Voltage : 230VAC +/- 10% 50 Hz
- Sensing Type : AC
Sensing Technology
- Output : Single
Phase 1Hp Pump/Bore well
Three Phase Pump/Bore
well (on Request)
- Indications : a)
Pump ON, Bore well ON
b) Water Flow
c) Overhead Tank Max, Normal, Min
d) Sump Max,
Normal, Min
e) Dry Run
f) Input Supply
High, Low
- Alarms : a) Input
Supply High/Low Alarm with Trip
b) Dry Run Alarm
with Trip
- Protection : Input
High or Low Voltage Protection
Dry run Protection
- Keys : a)
Auto/Manual
b) Manual On/Off
c) Fill Function
- Temperature : 0 to
+50º C
- Humidity : 0 to
90% RH (Non Condensing)
- Size : 160(H)
x175(W) x60(D) mm
| |
|
|
|
|
|
Dental X-ray Timers We manufacture and supply
a wide range of high quality dental X-ray timers, which are widely
preferred in dental for their excellent durability and
operation. Being a customer centric organization, we can offer these
dental X-ray timers as per the specifications of our clients. A. Specifications of
Dental X-ray timer Model No. BE-2200
- Range: 0.1 -3.9
Seconds
- Setting: Through
front panel keys
- Out put type:
Relay / Solid state contact.
- Indication:
Output ON/OFF Indication (LED) Hi/Low Voltage
- Start Function : By
Shooter/ Remote
- Size : 120 ×
150 × 60 (mm)
- Operating Voltage:
230 VAC +/- 10% 50 Hz
- Temperature: 0 to
+50º C
- Humidity: 0 to 90%
RH (Non Condensing).
B. Specifications of
Dental X-ray timer for RVG. Model No. BE-7300
- Range : 0.01 - 3.99 Seconds
- Setting: Through
front panel keys or By Remote
- Out put type:
Relay / Solid state contact. RVG Compatible
- Indication:
Output ON/OFF Indication (LED) Hi/Low Voltage
- Start Function : By
front panel Keys/ Remote
- Size : 150 ×
180 × 70 (mm)
- Operating
Voltage: 230 VAC +/- 10% 50 Hz
- Temperature: 0 to
+50º C
- Humidity: 0 to 90%
RH (Non Condensing
| |
|
|
|
|
|
Copyright © Bright Electronics, All Rights Reserved (Terms of Use)
