Chennai, Tamil Nadu
Home»Our Products»

Fluid Mechanics Equipment

We are engaged in manufacturing and supplying a broad assortment of Fluid Mechanics Equipment. Manufactured as per the international quality standards, the offered equipment are highly admired for their complex design, durability and resistant to corrosion features. Moreover, these are made up of the fine grade raw material that is sourced from trustworthy and reliable vendors. Moreover, our esteemed clients can avail these equipment from us at highly affordable prices.


Fluid Mechanics Catalog

Fluid Mechanics Catalog
Fluid Mechanics Catalog

We Produce following products in this Category:
Venturi Meter Test Rig. Orifice Meter Test Rig,Triangular Notch and Rectangular Notch,Pipe Friction Apparatus, Mouth Piece Tank Apparatus, Burnoulis Theorem, Jet and Vane Apparatus, Losses through bends and Elbows, Orifice Tank, Reynolds Apparatus, Pitot Tube apparatus,Pelton Trubine, Francis Turbine, Turgo Impuse , Kaplan Turbine in both Conventional and Computer Integrated Real Time Digital Engineering Lab System with Data Loggers and Quadra Mode , for Teaching Learning, Examination and Evaluation modes, This will Generate High level of Employable Engineers If Implemented in your Institutions/Universities


Bernoulis Apparatus

Application:

To verify Bernoulli’s Theorem Experimentally

Features:

Acrylic test Section, Closed Loop water Circulation, Compact & Stand alone set up, Stainless Steel tanks and wetted parts. Superb Painted Structure, Simple to operate. The Entire Compact system comes with dedicated Micro controllers & Software, digital sensors, system based algorithm with back & Front end calculations & three different modes to generate skilful & employable Engineers.

Met Centric Height Apparatus

Met Centric Height Apparatus
Met Centric Height Apparatus

We are successfully ranked amongst the top manufacturers and suppliers an exclusive array of Met Centric Height Apparatus - BSPIL-FML-20000. This apparatus is used to determine the meta-centric height of a ship model under load and unload condition. In order to manufacture this range in compliance with international quality standards, we use high quality material and advanced technology. Recognized for its high tensile strength, compact design, durability and longer service life, the offered equipment is available at industry leading prices.

Specifications:

  • Copper Sheet Vessel 350x350mm is provided with device for loading on different points corresponding to the keel
  • Bridge is graduated in degree is provided for measuring the angle of inclination
  • The unit is completed with clamping screw and two sets of brass slotted weights of 10gms
  • Sump tank for the above apparatus a 40 Liter capacity steel tank is provided with drain cock and is transparent window marked in CMS.
  • Total Weight: 20 Kg
  • Dimension: 40 x 40 cm sump tank.

Flow Through Notches

We are counted amongst the foremost manufacturers and suppliers of Flow through Notches - BSPIL-FML-20001. This is broadly demanded owing to its tremendous strength, compact design and longer service life. Furthermore, the offered assortment is manufactured by our experts in accordance with set quality standards and latest technology. We offer this product in both, standard and customized forms as per the varied specifications of clients. Clients can avail this product at very reasonable rates.

Specifications:

 

  • M.S. Notch tank capacity of 40 Liters
  • Having steadying arrangement with baffle and provision for fixing interchangeable notch plates
  • Set of different sharp edged notches
  • Rectangular notch 100mm Pipe system with 2 G.I. Pipe lines of size 15mm and triangular notch 60mm
  • Hook gauge with provision for mounting
  • M.S. measuring and collecting tank of size 40Lts
  • Capacity provided with gauge glass scale arrangement and drain valve
  • Total weight: 75 kg Approximately
  • Space needed: 3 x .3 x 3 Ms

Flow Through Orifice And Mouth Pieces

Flow Through Orifice And Mouth Pieces
Flow Through Orifice And Mouth Pieces

By keeping track with the market development, we are engaged in offering our clients various kinds of Flow through Orifice and Mouth Pieces. Manufactured in accordance with the industry standards, we use high grade raw material and sophisticated machines for manufacturing this range. The offered collection is extremely recognized for its easy to use, low maintenance, longer service life and compact design. Apart from this, our range is thoroughly checked by our quality controllers on different pre-defined parameters.

Purpose:

  • This equipment is designed for determination of co-efficient of discharge of orifice & mouthpiece

Description:

  • Flow through orifice and mouth pieces CV, CD, CC, of orifice & CD of Mouthpiece - BSPIL-FML-20002
  • Recirculation type equipment and
  • Consists of a Sump Tank, Collecting Tank, Measuring Tank and Monoblock Pump etc.
  • Suitably mounted on a sturdy base frame
  • Necessary instruments for measuring X-Y co-ordinates, stop clock, etc.
  • Provided with corrosion resistant Sump Tank and Measuring Tank made up of M.S. Sheet lined with fiber glass
  • Set-Up is very compact and can be easily moved around the lab
  • As compared to conventional set-ups, it requires less space

Specifications:

  • Set of Orifice: 10mm & 15mm (Acrylic)
  • Set of Mouth piece: Dia. 10mm, L/D 2.5 & 4 (Brass)
  • Sump Tank: Capacity 150 ltrs
  • Material M.S. Sheet with F.R.P. lining from inside for prevention of rusting
  • Collecting Tank: Capacity 100 ltrs. Material M.S. Sheet with F.R.P. lining from inside for preventing of rusting
  • Stand for mounting the collecting tank
  • Measuring Tank: Capacity 40 ltrs. Material M.S. Sheet with F.R.P. lining from inside for prevention of rusting
  • Piezometric Glass Tube for flow measurement
  • Mono Block Pump: Capacity 0.5 HP, Single Phase, 230 V
  • With required bye-pass valve and suction piping
  • Flexible Hose Pipe for connecting the basic unit to the Sump Tank
  • Control valve for controlling the flow rate
  • Stop clock
  • Scale X-Y co-ordinate measuring arrangement
  • A base frame made up of sturdy M.S. Angles
  • Weights: 80 Kg (Approximately)
  • Dimension: 4 x .4 x 3 m

Centrifugal Pump Test Rig

Centrifugal Pump Test Rig
Centrifugal Pump Test Rig

Centrifugal Pup test rig comes with both conventional model and computerised models in line To Real Time Digital Engineering Lab systems (RTDELS) which comes in Quadra Mode. Please refer catalogue in respecitive category of Labs


Pipe Friction Apparatus

Pipe Friction Apparatus
Pipe Friction Apparatus

We can provide pipe friction apparatus in both mechanical and computerized versions both in mild steel and stainless steel depending upon budget of the institutions. Please refer the catalog in PDF.


Francis Turbine

Turbines such as francis, Turgo Impulse, Kaplan, Pelton is produced in both conventional and modern method with computer integration with Real Time Digital Engineering Lab  Systems (RTDELS)  Please refer the Catalogs.


Gear Oil Pump Test Rig

Gear Oil Pump Test Rig
Gear Oil Pump Test Rig

Gear Oil Pump Test Rig comes with both conventional and computerized version with data loggers, Lab view Software in line to Real Time Digital Engineering Lab Systems (RTDELS) in Quadra Mode, Please refer the catalogs.


Hydraulic Dynamometer

Hydraulic Dynamometer Test Rig comes with both conventional and computerised version with dataloggers, Labview Software in line to Real Time Digital Engineering Lab Systems (RTDELS) in Quadra Mode, Please refer the catalogue


Impact Jet On Vanes

Impact Jet on vanes  comes with both conventional and computerised version with data loggers, Labview Software in line to Real Time Digital Engineering Lab Systems (RTDELS) in Quadra Mode, Please refer the catalog.


Kaplan Turbine

Kaplan Turbine Test Rig comes with both conventional and computerized version with data loggers, Lab view Software in line to Real Time Digital Engineering Lab Systems (RTDELS) in Quadra Mode, Please refer the catalog.


Pelton Turbine Test Rig

Pelton Turbine Test Rig
Pelton Turbine Test Rig

Pelton Turbine Test Rig comes with both conventional and computerized version with data loggers, Lab view Software in line to Real Time Digital Engineering Lab Systems (RTDELS) in Quadra Mode, Please refer the catalog.

Reciprocating Pump Test Rig Variable Speed

Reciprocating Pump Test Rig Variable Speed
Reciprocating Pump Test Rig Variable Speed

Variable Speed Reciprocating  Test Rig comes with both conventional and computerized version with data loggers, Lab view Software in line to Real Time Digital Engineering Lab Systems (RTDELS) in Quadra Mode, Please refer the catalog.

Reciprocating Pump Test Rig

Reciprocating Pump Test Rig
Reciprocating Pump Test Rig

Reciprocating Pump Test Rig comes with both conventional and computerized version with data loggers, Labview Software in line to Real Time Digital Engineering Lab Systems (RTDELS) in Quadra Mode, Please refer the catalog.


Rotary Air Compressor Test Rig

Rotary Air Compressor Test Rig
Rotary Air Compressor Test Rig

We can make single stage and  two stage air compressor test rig, please refer the catalog.


Venturi Meter Test Rig

Venturi Meter Test Rig
Venturi Meter Test Rig

Venturimeter test rig can be made in conventional method and also in computerized level with real time digital engineering systems (RTDELS) with quadra mode. Ref catalogues and also visit our RTDELS pages.


Centrifugal Pump Test Rig Stainless Steel Construction

Centrifugal Pump Test Rig Stainless Steel Construction
Centrifugal Pump Test Rig Stainless Steel Construction

This Centrifugal Pump Test Rig is made out of Stainless
Steel constuction for Rust Proof and Long lasting Smooth Functioning of The System, we use SS 304 High quality Grade for making this Test Rig.  We do make this sytem with conventional system. Please refer Catalogue 



B. S. Pyromatic RTDELS Private Limited

Mr. P. Sridhar (Managing Director)
No. 27/1, Vaigai Colony, 12th Avenue, Ashok Nagar
Chennai - 600083
Tamil Nadu, India
© B. S. Pyromatic RTDELS Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited