Our in line resistance annealer machine is equipped with a highly advanced system that ensures a predictable wire elongation. Often attached with the wire drawing machine, a uniform and properly synchronized wire can be obtained from these machines without any tarnishing. This machine proves to be cost effective and time saving for these industries as drawing of wires as well as their annealing is carried out in a single process. Various models of this machinery assists in annealing copper wires of various sizes.

MODEL	WIRE SIZE DIA	LINE SPEED
RA 30	0.15-0.30mm	MAX.1600mpm
RA 60	0.30-0.53mm	MAX.1200mpm

The In Line Resistance Annealer offered by us in the global markets is a system that is not directly connected to the wire drawing machine. These latest and advanced machines are very efficient and are used in many wire and cable industries for annealing bare copper wires. In these machines, the drawn wire is taken up from a pay off spooler instead directly from the wire drawing machine. This wire is then passed through an annealer and winded on the take up spool situated at the other end of this machinery.

MODEL	WIRE SIZE DIA	LINE SPEED
RA 80	0.40-0.85mm	1000mpm
RA 100	0.60 - 1.05mm	800mpm

Our in line resistance annealer machine is equipped with a highly advanced system that ensures a predictable wire elongation. Often attached with the wire drawing machine, a uniform and properly synchronized wire can be obtained from these machines without any tarnishing. This machine proves to be cost effective and time saving for these industries as drawing of wires as well as their annealing is carried out in a single process. Various models of this machinery assists in annealing copper wires of various sizes.

MODEL	WIRE SIZE DIA	LINE SPEED
RA 200	0.8-1.80mm	700mpm
RA 300	1.2-2.5mm	500mpm

We also specialize in manufacturing and exporting Offline annealer machine. As its name suggests, it is suitable for annealing many strands of copper wire in a single process. Our machinery is built with extreme technical and quality control processes to ensure high performance from them. This machine also involves an off line annealing process. This machine is capable of annealing 24 spools of wire at a time that assists in saving cost, resources and most importantly the precious time.

The spools fitted in the take up stands of these machinery are either driven together by group drive motors or through a individual torque motor dedicated to drive each of the 24 spools. Each spool can hold the maximum weight of 30 kgs. These annealer's offers many advantages that are :

• Wires are free from color variation
• Energy efficient
• No leakage of vacuum
• No effect of weather

MODEL	WIRE SIZE DIA	SPOOL SIZE DIA	SPOOL WEIGHT
MA 30	0.15-0.30mm	100-200mm	5-15 Kg
MA 50	0.2-0.5mm	100-200mm	5-20 Kg
MA 70	0.3-0.70mm	150-250mm	15-30 Kg

We also specialize in manufacturing and exporting Offline annealer machine. As its name suggests, it is suitable for annealing many strands of copper wire in a single process. Our machinery is built with extreme technical and quality control processes to ensure high performance from them. This machine also involves an off line annealing process. This machine is capable of annealing 24 spools of wire at a time that assists in saving cost, resources and most importantly the precious time.

The spools fitted in the take up stands of these machinery are either driven together by group drive motors or through a individual torque motor dedicated to drive each of the 8/12 spools. Each spool can hold the maximum weight of 100/150 kgs. These annealers offers many advantages that are :

• Wires are free from color variation
• Energy efficient
• No leakage of vacuum
• No effect of weather

MODEL	WIRE SIZE DIA	SPOOL SIZE DIA	SPOOL WEIGHT
MA 100	0.5-1.05mm	300-400mm	100 Kg
MA 160	0.7-1.60mm	400-500mm	150 Kg

The induction preheater offered by Cab Device Industries is used to heat copper and aluminium wires of different thicknesses, on extrusion lines. The pre heating of various wires into this machinery ensures removal of moisture from conductor and avoids breakage and shrinkage of wire coatings. It is an in line machinery which means it is directly connected to the wire drawing machinery. It operates on the principle of electrical inductive resistance heating. These machines are created from highly precise manufacturing processes to ensure maximum performance, high speed, low wastage and cost efficiency. The contact type pre heaters can produce wires of 0.4mm to 6.00 mm diameter with flexibility up to 16 mm diameter. Whereas, the non contact type model can produce power cable conductor up to 300 sq. mm.

MODEL	WIRE SIZE DIA	LINE SPEED	MODE
PH 600	0.4-1.5mm	600 mpm	AUTO/MANUAL
PH 1500	0.4-1.00mm	1500mpm	AUTO

The induction pre heater offered by Cab Device Industries is used to heat copper and aluminium wires of different thicknesses, on extrusion lines. The pre heating of various wires into this machinery ensures removal of moisture from conductor and avoids breakage and shrinkage of wire coatings. It is an in line machinery which means it is directly connected to the wire drawing machinery. It operates on the principle of electrical inductive resistance heating. These machines are created from highly precise manufacturing processes to ensure maximum performance, high speed, low wastage and cost efficiency. The contact type pre heaters can produce wires of 0.4mm to 6.00 mm diameter with flexibility up to 16 mm diameter. Whereas, the non contact type model can produce power cable conductor up to 300 sq. mm.

MODEL	WIRE SIZE SQ-MM	LINE SPEED	MODE
PH 6	1.00-6.00	500 mpm	AUTO/MANUAL
PH 16	2.5-16.00	200mpm	MANUAL

The sequential marking machine is offered by us on the global market fronts. These machines are used for marking information such asmeter marking and cable specifications on to the PVC sheathed cables. Hot pigment tape is used in these machines for marking cables in a sequential manner. These are also used for printing various specifications on the sheathed cables. The meter head of this machinery is of four numerical digits with a letter size of 3.5 H x 3 w and 5.0 H x 3 W mm or as per the customer's requirements. It can hold the cable of 8mm to 100mm diameter or flat cables.

MODEL	CABLE SIZE DIA	FLAT CABLE
SQ S	8-80mm	8-40mm
SQ-H	50-125mm	-----

It is mechanical meter head. It is operated by a Cam and zero reset facility.

MODEL	HEIGHT LETTER SIZE	WIDTH LETTER SIZE
SQM-S	4.00mm	3.00mm
SQM-R	1.50-3.00mm	2.00-3.00mm

Tinning plant is used to apply a coating of tin on the copper wires. During the wire manufacturing process it is used to apply hot dip tinning onto the bare copper wires to increase their efficiency and conduction of electricity. These plants are available in the following models and specifications :

MODEL	WIRE SIZE	LINE SPEED	SPOOL WEIGHT
T 30	0.10--0.30	300mpm	4-10 Kg
T 50	0.25--0.50	150mpm	5-15 Kg

Tinning plant is used to apply a coating of tin on the copper wires. During the wire manufacturing process it is used to apply hot dip tinning onto the bare copper wires to increase their efficiency and conduction of electricity. These plants are available in the following models and specifications
:

MODEL	WIRE SIZE	LINE SPEED	SPOOL WEIGHT
T 100/70	0.40--1.05	100mpm	70 Kg
T 100/100	0.40--1.05mm	100mpm	100 Kg