We offer a wide range of analog signal isolation modules, which are available in following specifications:

• DC Signal Isolating Amplifiers: Unipolar & bipolar.
• Volatage Inputs (mV): 10V.
• Current inputs: (0-20 mA,4-20 mA).
• Output: 0-10V, 0-20 mA, 4-20mA, 0-10 kHz.
• Wide Power Supply Option: 24/48/110 V DC, 110/230 V AC, Universal 90-260 V AC.
• AC Current & AC voltage transducers.
• Frequency transducers.
• Load cell amplifiers having in-built excitation source.
• Multi-channel DC isolating amplifiers.
• 4 and 8 channel analog signal multiplexer units.
• Interface modules for analog signal conditioning and function generation.
• Excellent accuracy & linerarity over measurement range.
• Two wire transmitters.
• Fast response models for AC & pulsating DC signal isolation.
• 2 port & 3 port isolation (2kv).
• Proven reliability in industrial applications.
• Compact 35 mmDIN rail mounted design.

We offer our comprehensive range of signal conditioning & isolation modules, which comes with following features:

• Slim & compact DIN rail mounted (width 22.5 mm).
• Input range: RTD, 0-5VDC, 0-10VDC, 0-20mA, 4-20mA.
• Wide auxiliary supply voltage range (18-36 VDC).
• Reduced power consumption (<2W) reducing overall DC power supply load.
• Efficient switching power supply design results in lower heat generation.
• Improved performance.
• Low peak and RMS noise.
• Low drift input circuitry for long term stability.
• Accuracy +/-0.2% of FS.
• 2 Port and 3 Port Isolation options.
• 2 KV Isolation between signal & power lines.
• Designs comply with the requirements of IEC standards.
• Performance guaranteed from 0-60 Deg C anvuebt temperature.
• CE approval under process.

We offer our range of analog signal isolators, which comes with following features:

• Available in single / Multi channel / splitter types.
• 3 Port, 2 KV Isolation.
• Accuracy +_ 0.1 % of FS.
• Universal power supply 90-270 VAC, 50 Hz.
• Design conforms to IEC standards.
• CE certification for signle channel modules.

Applications:

• AC/DC Drive systems
• Power monitoiring systems
• PLC control panels
• DCS control panels

Our range of load cell amplifier is a precision amplifier used for conditioning of the millivolt output from a Load Cell. It can be given as an input to the microprocessor based interface unit. Alternately, the output can also be given to the analog input module of the PLC or DCS system in the form of standard 0 – 10 V DC or 4 – 20 mA DC signal. In addition, the unit has a built in 10 Volts precision reference generator, which is used for excitation of the load cell.

These units are extremely stable and accurate for long term measurement applications and can also calibrated to suit the load cell response characteristics so that maximum sensitivity is available in measurement range.

Our range of CI - 800 DP series is widely used in remote machine & process control applications having low I/O count clusters as well as intelligent motor control centers. The main features of CI - 800 DP series are:

• Design conforms with IEC standards
• Module capacity: 12 X 24 VDC DI / 8 X 24 VDC, 0.2 A DO
• Integrated Profibus: DP slave interface (12 Mb)

Our range of Receiver Instruments is basically DVM's designed to fulfill the varied requirement of accurate measurement and display of various parameters in different process industries. The units provided use dual slope integration method for digitizing the analog inputs resulting to excellent linearity over the entire range. A temperature compensated reference provide minimum drift with comprehensive changes in ambient temperatures.

Adjusting a single trimpot provide easy re- calibration. Provided with an option of choosing, the input ranges for full scale Voltage inputs ranging from 50 mV up to 500 V. the Current inputs is 4-20 mA DC, 0 -1 Amp AC, etc. Various power supply options of 110V/230 VAC power supply as well as 24V/48V/110VDC power supply are available. The applications include indication of AC/DC voltages & currents, temperature, speed, distance, pressure, weight, etc.

Our range of Indicating Controller come with following feature, which can be further customized as per the client's requirements:

• Input Range & Type RTD / TC / 4-20ma / 0–10 V DC/0 –500V /0 – 5 A AC
• Display 3 digit OR 4 digit
• 1/2" Red Seven segment LED display
• Power supply 230VAC +/- 10%, 50Hz
• 24 V DC +/- 10 % Set Point Selection
• Knob As per user requirement
• Push button will be provided on front fascia for setting the set pt.
• Enclosure Cut Out Dim: 92 x 92 mm
• Bezel dim: 96 x 96 mm
• Alarm output Relay contact 1NO, 1NC rated for 230 VAC, 5A
• Linearity 0.1% ( Thermocouple nonlinearity is not compensated.)

Control Panels Accessories

We offer a wide range of control panels accessories, that come with following features:

• Modularity: 1/2/4/8/16 Channel with and without Fuse


• Relay make: OEN / OMRON


• Approvals: UL / CSA / VDE


• Contacts: 1/2/4 / ‘CO’ contacts per relay.


• Coil Voltage: 24 V DC / 110 V DC /230 V DC/ 110 V AC / 230 V AC


• Min. Pull in voltage: 80% Max.


• Allowable voltage: 130%


• Enclosure and mounting: PCB is enclosed in metallic powder coated and unbreakable phoenix germany make profile base with DIN rail mounting type.


• With Base and Without Base


• Available in 1/2/4 Changeover Relay Contact


• Relay is provided with 3mm Green LED to indicate pick-up condition


• A freewheeling diode protection is provided across the coil


• The flexible links are provided to make any combination of looping or independent coil circuits


• DIN Rail Mounting option with metallic/ plastic enclosure


• PLC Specific Card also available

Terminations

• Make: Phoenix


• Type: MKDS – 3/3 MKDSN – 1.5 /2
  
• Approvals: UL / CSA/VDE
  
• Rating: 32 A max. suitable for 2.5 sq. mm cable
  
• Features: Unbreakable, Non Self Loosening

We offer a comprehensive range of Rs 232 to 485 interface converter, which comes with following specifications:

General Specifications

• Input: On board EMI / RFI filter with soft start and fuse protection
• I/P ranges: AC single Phase(90 - 135V or 180 - 270V)
• Output: LED status indicator
• Line and load regulation <+ 0.5%
• Ripple and noise <+ 1% p - p
• O/L, S/C protection with optional OVP
• For single o/p - precise current limit with CVCC and o/p voltage + 5% adjustable
• Latest current mode PWM Controller
• MOSFETs and UFR diodes used.
• Compact, lightweight, very efficient.
• DC UPS for battery backed instruments.
• I/O connections are available on wire connectors or screw terminals.
• Units can be directly paralleled for higher current requirements
• By using external diode blocks (N+1) redundancy possible
• I/O isolation 2 KV
• Upto 500 C ambient

Special Features

• Alarm contact Fan fail/over temperature shut down
• External shut down signal
• Optional remote sensing programmable SMPS PFC
• 0 - 5V control for output voltage and current setting
• PSU with separate battery and load terminals with separate current setting

We offer a wide range of Thermo Couple Converters, which is widely used in temperature monitoring and control applications. The main features and applications of our range is given by:

Feature

• Single/Dual channel options
• In built CJC & sensor non-linearity compensation algorithms
• Configurable Thermocouple types J, K, R, S, T etc.
• EMC compliance with IEC 61000-4-4 for EFT bursts & IEC 61000-4-5 standards for Surges
• 3 port, 1.5 KV isolation
• Modular expansion options with Profibus -DP slave port.
• Compact DIN rail mountable enclosure

Applications

• Process industries
• Plastic processing machinery
• Textile machines
• Heat treatment furnaces, Autoclaves etc.

We offer our range of ultra sonic test equipments, that is used for following usages:

• Estimation of In-situ strength of concrete as well as precast concrete products
• Confirming the uniformity as well as quality of concrete to enable timely corrective actions
• stimation of depth of crack or investigation of internal defects of concrete
• Estimation of defective layer of concrete sub-grades
• Diagnosis of deterioration of concrete due to various conditions such as environmental impact, attack of chemicals, alkali-aggregate reaction, etc.
• Estimation of damages due to fire, thermal shocks, and mechanical shocks
• Estimations of endurance under freezing and thawing test on concrete