Captronic Systems Private Limited

CAPture FRA is a value-priced PC- based solution based on industry standards, and featuring a familiar Windows based user-interface.The benefits of CAPture FRA are: User-configurable swept sine frequency generation, with continuous as well as discrete frequency steps Automatic calculation of Phase margin and Gain margin of the UUT (Unit Under Test) Portability: the rig being compact in package, the hardware and software components can be carried to any Location

CAPture Fatigue offers distinctive advantages when compared to fatigue analysis solutions from other companies: Flexible Set-up: CAPture Fatigue can be configured either in a stand-alone mode or connected to a PC. In the former case, the hardware module records the information and stores it on an on-board hard drive for subsequent analysis; while in the latter case, the data is downloaded to a PC for further analysis. Completeness: CAPture Fatigue is one of the few fatigue analysis solutions that includes both hardware (acquisition component) and software (analysis component) modules. Most solutions in the market require the user to approach different vendors for the acquisition and analysis components. Configurability: The acquisition component of CAPture Fatigue is highly configurable; with parameters such as Variable Sampling Rate, Strain Gauge properties (gauge resistance, lead resistance ratio, etc.), Offset Nulling, and Shunt Calibration offering various selection options. Value-priced: CAPture Fatigue, like the other CAPture products, offers great value for money, thanks to its industry-standard hardware module, and its Windows-based software module.

The two models of CAPture Remote, W2320 and W2420, offer users tangible benefits, when compared to products from competition: CAPture Remote W2320 is a value-priced solution, allowing users to monitor even not-so-expensive, but critical, equipment. CAPture Remote W2420 is a high-performance solution, offering higher sampling rates, higher data transfer rates, and a larger on-board memory. Both models support analog inputs, in addition to digital inputs. Both models are truly remote solutions, in that they do not depend on the availability of a LAN or Wi-Fi network, for operation. They support an in-built GSM/GPRS module. They can also function in quasi-remote configurations (availability of a LAN). CAPture Remote W2420 offers a higher level of availability, with support for remote System Configuration, and support for a Redundant Power Supply (RPS) module.

CAPture SoE is a PC-based solution based on industry-standards, and featuring a familiar Windows based user-interface. In comparison to competing products, CAPture SoE offers: Extremely thin time-slices for recording events (100?s for analog events and 1ms for digital events). Generous expandability, thanks to its modularity: each component of the solution can be upgraded and modified without affecting the system. Flexible configurability: either in a stand-alone or distributed mode, using the same hardware and software components.

Vibration is often the key indicator for diagnosing defects on rotating machinery or characterizing structural parameters.CAPSYS Sound and Vibration analyzer is a comprehensive application-oriented system providing powerful real-time analysis and all the necessary tools required for sound and vibration analysis from signal acquisition to reporting. The CAPSYS Sound and Vibration Analyzer is specifically designed system to make high-accuracy measurements for applications such as rotating machinery, acoustics and structural vibration.

CAPture Telemetry is a value-priced PC-based solution based on industry- standards, and featuring a familiar Windows based user-interface. The benefits of this solution are: Flexibility: Support for different types of platforms (PCI, PXI) offers the user a variety of test-bed and control options, through the same software interface. Configurability: The powerful software component allows the user a finer level of granularity over parameters such as Clock-rates, Number of Words, Number of Frames, Word Length, and Frame Synchronisation Pattern (FSP) Word Length. Portability: Being compact in package, the hardware and software components can be carried to any location.

* Read GPS through GPS satellites and transmit location information to remote modules. * Send and Receive commands and data through Short Message Service (SMS) using GSM networks. * Upload data to web servers using GPRS networks. * The PDAS supports different interfaces for different types of signals. The current version supports a variety of signals, which are as follows o Thermocouple K Type - 12 Channels (Mini Thermocouple Jacks) o Analog Inputs - 4 Channels (BNC type connector) o Vibration Inputs - 4 Channels (BNC type connector with support for IEPE accelerometers) o Strain Channels - 8 Channels (9 pin circular threaded connectors) o Digital Inputs - 4 Channels (BNC type connector) Thermocouple K Type - 12 Channels (Mini Thermocouple Jacks) Analog Inputs - 4 Channels (BNC type connector) Vibration Inputs - 4 Channels (BNC type connector with support for IEPE accelerometers) Strain Channels - 8 Channels (9 pin circular threaded connectors) Digital Inputs - 4 Channels (BNC type connector)

Captronic Systems Pvt Ltd, specialists in automation technology offers data logging and monitoring system to meet complete range physical parameter logging for unattended application. The system is selectable between low channel count with low acquisition and logging rate to high acquisition and logging rate. The Data Logger provides necessary signal conditioning for all the sensors connected to it and also facilitates excitation of the transducers. The system can log data from temperature sensors, pressure transducers, humidity sensors, accelerometers, strain gauges, LVDT's, flow, radiation, depth, force, vibration, velocity etc. and flexible enough to configure the system to log any physical parameter. It can also perform real time calculation to derive Engineering values on any base parameter. The Data Logger also performs real time monitoring and display, control and alarms for all the parameters. It is designed to provide the user with local as well as remote monitoring and can capture data through serial, Ethernet or through PCI bus. The Remote Unit can perform remote data acquisition and transfer the data to the data logger via radio modems. It can be operated in battery as well as AC power mode and is easily portable to field for on site data logging application. The data is logged to a database for easy retrieval and post analysis on the logged data. It also provides the user with customized report generation for professional presentation of data. The system facilitates historical data viewing and provides a graphical representation of history data. The system is well suited for all kinds of data acquisition and logging requirements and is an insignia of high end but cost effective and flexible data logger.