Care Wel Engineerins

APPLICATION:

• Ideal for Filter Press applications in Dyes, Intermediates,
• Scabber and Spary Drayer Application.
• Chemicals, Textiles, Ceramics etc. industries
• Oil & Petrochemicals Industries
• Effluent Treatment Plants
• Transferring, Loading, Unloading of Chemicals, Light Petroleum Products etc.

Part Description

casings : C.I.
Impeller : C.I. /Bronze
Diffuser : C.I.
Shaft : C 45
Sleeve : S.S./C.I.

APPLICATION:

• For handling of HCL-30%, diluted H2SO4, NaoH-48% etc. Chemicals
• Filter Press for dyes, Decaling
• Water & Effluent Treatment Plants
• Electroplating Solution Circulation & itching Solution for electronic circuit board.
• Transferring acids/alkalies/corrosive/chemicals
• For Descaling of Tubes
• Picking of Steel in Cold Rolling Mills
• Scrubbing of Corrosive Gasses like C12, Br2, F2, I2, SO2, SO3, CO2, NH3 etc.

Head : 3 to 76 meters
Capacity : up to 1890 LPM
Size : 12 mm to 100 mm

• Ideal for handling of Water, DM/DI Water, Mineral Water, Hot Water, Pharmaceuticals Liquid Drugs & Syrups, Milk, Butter Milk, Soft Drink, Beverages, Solvents, Acids, Alkalis, Light Petroleum products etc.
• Acid and Light Chemicals
• Colour Dyes and Pigments
• Booster Application
• Water Treatment Plants, RO Plants

Self Priming Non Clogg Pump "WNC" Series:-

Materials of Construction :

Standard Materials of Construction Comprises,

Volute Casing : Cast Iron GR. FG 200 As Per

Impeller : - do -

Motor Frame : - do -

Shaft : Carbon Steel C-40 of IS -2073 (EN-8) Grade.

Pump With, All Gun Metal/Bronze/
S.S. Construction Can Be Supplied Against Specific Requirement.

• All Crear Liquids Without Solid Suspensions Like Clear & Non Abrasive liquids, Water, DM Water, Mineral Water, Solvents, Light Chemicals Petroleum Products etc.
• High head Delivery / Booster Service
• Washing Equipments
• Barrel Transfer
• Water Treatment Plants

Design Features:

PCF- Series Centrifugal Chemical Process Pump are Horizontal, Single-stage, Volute casing pumps with dimensions and nominal ratings to CWE. Series The design permits dismantling of the complete bearing unit towards the drive end,
without the pump casing having to be disconnected from the piping. If a spacer coupling is used it is also unnecessary to disconnect the motor.

The range comprises 32 pump sizes: with the max. Interchangeability utilized, these are covered with only four shaft sizes. For a given shaft size, shaft seal, impeller nut and bearings are interchangeable.

Special features:-

• low npsh requirements.
• capable of de-airing long suction lines.
• can pump liquid + gas mixtures.
• minimum axial thrust leading to longer bearing life.
• non overloading power characteristics.
• low noise level.

Capacity - upto 14 M3/hr.
Head - upto 213 meters.
Speed -1450 RPM
Temp. - 95*C

• Boiler feeding and condensate pumping.
• Filter presses and Hydraulic Presses.
• Booster Service.
• Mine drainage.
• Dust Precipitation.
• Sprinkler System.
• Water supply in hilly areas.
• Multi Storage buildings.
• In descaling equipments.
• Washing equipments.
• To handle fuel oil, petrol, diesel, gas and other light chemicals.

Features

• design to suit extremely corrosive duties in process & chemical industries
• less expensive and most ideal pumps than other pumps like as ss & alloy metals
• engineered for continuous as well as intermittent service
• provision of mechanical seal/gland packing.