Compatible in operation and effective in performance, we offer Centrifugal High Pressure Blower for various industrial applications.

Ideally suited to supply air for combustion and atomization of oil and gases, these blowers are used for multi-purposes works such as agitations of liquids, cooling, drying, cupolas, hot air circulation, exhausting and pneumatic conveying and many more.

Construction

Strongly cased in heavy gauge steel sheets welded to form a rigid structure, the impeller incorporates low inertia and accurate balance. The impeller is mounted directly upon the motor shaft in case of direct motor drive. Whereas in case of belt driven fans, the impeller is mounted on steel shaft running in ball bearing. Generally fans are supplied with bottom horizontal discharge still the position can be adjusted as per customer's requirement.

Applications

These blowers can be used for:

• Fuel burning, cupolas
  
• Pneumatic conveying systems
  
• Exhausting
  
• Industrial processes
  
• Drying & cooling
  
• Agitating
  
• Ventilation

A range of Centrifugal Induced Draft Blower are available in various designs, style, configuration as well as according to customer's specific requirements, fans are prepared. Our up-to-date manufacturing capabilities and excellent design ensures effective airflow with least pressure loss. We ensure best quality to our products. Apart from providing various designs we also manufacture customized products catering the need of every customer.

The range which can be customized specifically

• Housing
  
• Access Door
  
• Housing Drain
  
• Casing Split
  
• Fan Outlet
  
• Inlet Box
  
• Inlet Cone
  
• Impeller
  
• Liners
  
• Shaft Seal
  
• Fan Shaft
  
• Damper
  
• Bearings
  
• Bearing Pedestals
  
• Coupling
  
• Fan Arrangements
  
• Additional Accessories
  
• Fan Selections

The fans manufactured can be used in varied range of industries namely

• Power Generation
  
• Iron and Steel Making
  
• Cement Production
  
• Chemical and PetroChemical Processing
  
• Mining and Ore Processing
  
• Pulp and Paper

There is a range of Twin Lobe Blower offered by us who are highly effective and having less mechanical friction.

The basic construction of Twin Lobe Blower consists of two symmetric lobes cased in semi circular container rotating in opposite directions. These lobes are not tooth wheels, they share contact-less conjugate motion to the rotor.

We take care of every minute details while manufacturing Twin Blower in order to surpass client expectations. Therefore we successfully develop highly accurate, most effective and finest Twin Lobe Blowers.

Construction

• Casing: Hydraulically casing ensures vitality as well as in larger casing we provide inspection ports for clearance check and internal inspection.


• Impellers: To impart smooth running and dynamic balance, impellers are accurately built.


• Timing Gears: To provide strength and smooth operation, gears are fitted which are quite manageable.

Apart from it we also provide Optional accessories such as

• V-Belt Guard
  
• V-Belt
  
• Air Filter
  
• Base Frame
  
• Silencer

We offer Axial Flow Fans, which are highly efficient. The number of blades in the rotors could vary from 2 to 50. As the name suggests, the flow of air is occurred in axial direction and the casing is done in such a way that it recovers static pressure.

As soon as the rotor rotates using an electric motor, a flow establishes through rotor causing an increase air stagnation pressure. There is a cylindrical casing, which encloses rotor. There are well shaped converging and diverging passage to receive and discharge the flow.

Construction

The fan wheels or rotors are constructed using heavy gauge MS sheet with an aluminum casting.

Applications

Widely applicable in ventilation process, which could be mines or tunnel where the large pressure is required along with compact dimensions.

We offer premium quality LAP Type Burners, which are manufactured function efficiently. These are easy-to-operate and maintain. Made up of superior quality alloy of cast iron, the burner comes with stationary atomizer, which can be removed for cleaning up the burner. Our burners minimize the frictional losses due to constructional effectiveness.

The working principle is effective as mixed fuel-oil combination is atomized by low pressure inside the burner and therefore effective combustion of gases with high CO2 content takes place. The output of the burner can be controlled with the oil regulation adjustments. The swirler flap provided with the burner controls the flame adjustment.

The turn down ratio of 1.4:1 with primary air supply can be further improved by using secondary air. The fuel is supplied either by the Gravity feed system or by the pump at a pressure of 0.7 Kg/cmm2g. The centrifugal blower imparts the atomized air at a pressure of 500-1000mm.W.g.

Different classes of liquid fuels can be used even without preheating. Only heavy oil should be preheated to lower its viscosity for proper atomization.

Applications

Extensively used in industrial furnaces and boilers, the burners are utilized in following industries

• Glass
  
• Bricks and Ceramics
  
• Bakery Ovens
  
• Klins and Galvanizing equipment
  
• Varnish Pots
  
• Tea Dryers
  
• Chemical Plants
  
• Rolling Mills
  
• Boilers
  
• Gasifiers

We offer efficient Self Proportional Burners with a very high turn-down ratio and the efficiency is further increased with correct oil-air ratio at all output. With strong construction, the flexible burner provides durable services for longer hours with little maintenance. Turn down ratio, widely referred to the ratio of maximum to minimum output, is 5:1 and thus efficient combustion and stable flame can be obtained.

Burner can be used with all classes of liquid fuel. The recommended atomizing air pressure and oil pressure should be less than 600 mm.Wg and 0.7Kg/cm2 respectively.

Construction

The burner body is made up of high-quality alloy cast-iron, which extends durability & strength. The rigorous quality control policy followed enables us to manufacture finest streamlined burners facilitating reduced frictional losses.

Applications

With quality design and superlative performance, the burners are used in various types of furnaces mentioned below

• Glass
  
• Bricks and ceramics
  
• Bakery Ovens
  
• Klins and Galvanizing equipment
  
• Varnish Pots
  
• Tea Dryers
  
• Chemical Plants
  
• Boilers
  
• Gasifiers
  
• Others

We offer highly efficient North American Type Burner having high turn-down ratio meeting all needs of customers. The atomization of oil in this burner is performed through the two air divisions, through which primary air and secondary air is swirled.

This system simplifies the operation and facilitates the automatic and remote control option, resulting into high performance. The burner encompass a turn down ration of 7.5:1 and simplified in getting stable flame, high CO2 content and effective combustion. With strong construction, the burner is capable of offering durable service effectively.

Various classes of liquid fuel could be used with this burner. The recommended oil pressure and air pressure should be more than 0.7 kg/cm2 and 600mm.Wg.

Construction

The body of burner is constituted of high-grade alloy of cast-iron with a stationary atomizer, which can be removed for cleaning purpose. As we follow stringent quality control measures, burners have less frictional losses due to its streamlined structure.

Applications

These burners could be used as furnaces for numerous operations in various functions such as

• Glass
  
• Bricks and Ceramics
  
• Bakery Ovens
  
• Klins and Galvanizing equipment
  
• Varnish Pots
  
• Tea Dryers
  
• Chemical Plants
  
• Rolling Mills
  
• Boilers
  
• Gasifiers

We offer splendid rotatory gear pumps, which are carved with difference to cater all the needs of customers. Rotatory pumps are used for mechanical displacement of liquid by the means of one or more impellers or gears cased in housing. Strongly built shape and size is advantageous in handling them without putting big efforts. Sticking to our strict quality measures, we use best available techniques and production facilities to produce these Rotatory Gear Pumps.

We offer heating pumping unit, which are made of qualitative raw materials to ensure durability and efficient functioning at clients end. These are available in various specifications and dimension and can be customized to meet the specific requirement of our clients. Moreover, our range is offered at industry leading prices.

Our range of diesel furnace are available in varied sizes and can be customized as per the clients specific requirements. These are used as the replacement of LPG burners, led melting, brass melting, aluminum melting etc. Moreover, our products are offered at competitive prices.

We offer a wide range of micro valve, which are available with the following features and advantages:

• Flow is instantly redirected and so there is no leakage
• Unique over-center snap action provides quick response
• No lubrication require
• Suitable for vacuum service

In addition to this, our range is used in the following:

• Pressure switches
• Level controls
• Air switch to operate pneumatic tools and pumps
• Pilot operation of main valves
• Many other similar applications

We offer pressure regulating valve, which varies with temperature. These are manufactured, using superior grade raw materials to ensure durability and reliability at clients end. Apart from this, we offer our products at reasonable cost and can be customized as per the clients requirement.