Chandra Electric Company

Special purpose low power consumption 2 capacitor high starting torque induction motors for shredder application, air curtain motors. These motor are custom made after analyzing the application. Other conventional motors are also available. To know details please contact us.

Motors available in 12v, 24v, 48v, 110v, 180v of various RPM (40, 50, 100, 200, 300, 1000, 2000, 3000 etc). These motors widely find application in pharmaceutical, stabilizer, DC fans, automation application. The motors are made of high flux density ceramic magnets with body composed of low carbon steel for better magnetic permeability, the body of the motor are cover with powder coating for atmospheric resistivity and good aesthetic look. The motor brushes are of carbon copper content for more life and better lubrication. With holders made of brass quality for long life. Armature are dynamically balanced with well lubricated ball bearings making the motor intact. To know details please contact us.

Product Code:

PMXXXX

This Motor is mainly used for centrifuge application with special provision made for mounting. Motor Body is made out of carbon steel, end shields out of aluminium alloy. These are protected against corrosion by pretreatment and finally powder coated. Hard ferrite magnets with high coervice force are used to get high starting torque at nominal voltage. Motor can be made in any voltage required from min of 500 rpm to 5000 rpm. Motor can also provided with magnetic incremental encoder with RPM indicator without increasing the size of the motor. Armature is dynamically balanced and supported with ball bearings. These are face mounting motors and can be installed in any desired position.

Shunt Motors for constant load application, where speed does not drop with increase on load. These motor can be build to make compound and differential motors. Available in any voltage and rating upto 1 HP only. The motor brushes are of carbon copper content for more life and better lubrication. With holders made of brass quality for long lasting. Armature are dynamically balanced with well lubricated ball bearings making the motor intact. To know details please contact us.

Product Code:

SHMXXXX

Motor Body is made out of carbon steel, End shields out of aluminium alloy. These are protected against corrosion by pretreatment and finally powder coated. Hard ferrite magnets with high coervice force are used to get high starting torque at nominal voltage. Motor can be made in any voltage required from min of 500 rpm to 5000 rpm. Motor gears are made of high tensile strenght polymides, long lasting life. Motor can be offer from 1 rpm to 300 rpm. Motor can also provided with magnetic incremental encoder with RPM indicator without increasing the motor dimension. Armature is dynamically balanced and supported with ball Bearings.
These are foot mounting motors and can be installed in any desired position. If required can be provided with flange mounting also.

GEARED SHADED POLE MOTORS

MOTOR CAN BE OFFFERED IN ANY RPM, GEARS ARE ALL HARDENED STEEL FOR LONG LIFE.

1)  MOST COMPACT IN DESIGN TO ACCOMODATE LARGEST HORSE POWER.
2)  MATERIAL USED FOR ARE GUARANTEED WITH QUALITY AND RELIABILITY.
3)  TEMPERATURE RISE IS LIMTED TO 40 deg C.
4)  SINGLE PHASE SHADE POLE SKELETON TYPE ELEC. MOTOR OF 220/230 V ac, 2800 RPM 50Hz.
5)  AVAILABLE IN LOWER VOLTAGES ALSO.
6)  MOZAC DIE CASTING BEARING ARMS TO EACH END.
7)  MOTOR ARE OFFERED WITH BALL BEARING, CAN BE OFFERED IN SINTERED BUSH ON REQUEST.
8)  HORIZONTAL OR VERTICAL MOUNTING TO SUIT CUSTOMER'S NEED.
9)  COILS ARE VARNISHED BEFORE ASSEMBLED.
10) MOTORS CAN BE OFFERED IN ANY STACK LENGTH.

Product Code:

SPGXXXX

Motor Body is made out of carbon steel, End shields out of aluminium alloy. These are protected against corrosion by pretreatment and finally powder coated.
Hard ferrite magnets with high coervice force are used to get high starting torque at nominal voltage. Motor can be made in any voltage required from min of 500 rpm to 5000 rpm. Motor can be provided with gearbox (inline, planetary, worm reduction) also, motor gears are made of hardened steel, long lasting life. Motor can be offer from 1 rpm to 300 rpm. Motor can also provided with magnetic incremental encoder with RPM indicator with RPM indicator. Armature is dynamically balanced and supported with ball bearings.These are face mounting motors and can be installed in any desired position.

Product Code:

PMG2XXXX

Low rpm geared shaded pole motors

motor can be offfered in any rpm, gears are all hardened steel for long life.

1)  most compact in design to accomodate largest horse power.
2)  materials used for are guaranteed with quality and reliability.
3)  temperature rise is limted to 40 deg c.
4)  single phase shade pole skeleton type elec. Motor of 220/230 v ac, 2800 rpm 50hz.
5)  available in lower voltages also.
6)  mozac die casting bearing arms to each end.
7)  motors are offered with ball bearing, can be offered in sintered bush on request.
8)  horizontal or vertical mounting to suit customer's need.
9)  coils are varnished before assembly.
10) motors can be offered in any stack length.

Product Code:

SPG2XXXX

We offer PM DC planetary Geared Motor with Brake.

It has an advantage of centre shaft and high efficiency.  Compared to weight ratio,  it delivers  high torque.  With factory filled synthetic lubrication, it operates silently with high tortional rigidity.

Motor Body is made out of carbon steel, End shields out of aluminium alloy. These are protected against corrosion by pretreatment and final electro plated

Hard Ferrite Magnets with high coervice force are used to get high starting torque at nominal voltage.

Motor can be made in any Voltage and can be designed to give desired speed from min of 500 rpm to 5000 rpm

Provided at the end of the Gear motor  Fail Safe Electromagnetic Brake for Instant Stop.

Product Code:

PMBPLXXXXBr

Our Company is in the motor business for the past two decades and is manufacturing PMDC motors, universal type motors, AC motors, geared AC/DC motors, shaded-pole (skeleton type) AC motors and other servicing jobs. The products are mainly fractional horsepower to one HP motors, catering to testing equipments, laboratory equipments, stirrers, air curtain equipments, hand dryers, barrel pump, servo voltage stabilizers, pharma machineries etc. We accept taking up more and more challenging products for development to meet the increasing global demands. Fractional horsepower motors (geared & ungeared types of motors we currently manufacture: i) Permanent Magnet DC motors ii) Universal (AC/DC) motors iii) DC Shunt motors iv) AC induction motors v) Geared Motors (AC/DC) vi) Shaded Pole skeleton type ac motors. vii) Servo Motors with tacho or encoders.

All type of shaded pole motors with also gear box for speed reduction, made for applications like hand dryers, fans, diaphragm pump, magnetic strirrers, pump etc. To know more details please contact us.

Product Code:

SPXX

Motor Body is made out of carbon steel, end shields out of aluminium alloy. These are protected against corrosion by pretreatment and finally powder coated. Motor is Totally Enclosed. Hard ferrite magnets with high coervice force are used to get high starting torque at nominal voltage. With low current consumption. Motor can be made in any voltage required from min of 500 rpm to 5000 rpm. Motor can be provided with gearbox (inline, planetary, worm reduction) also, motor gears are made of hardened steel, long lasting life. Motor can be offer from 1 rpm to 300 rpm. Motor can also provided with magnetic incremental encoder. Armature is dynamically balanced and supported with ball bearings.
These are face mounting motors and can be installed in any desired position.

Starter Body is made out of carbon steel. These are protected against corrosion by pretreatment and finally powder coated.

Hard Ferrite Magnets with high coervice force are used to get high starting torque at nominal voltage.

Armature is dynamically balanced and supported with Ball Bearings.

This Motor is a Universal motor. Operating voltage 230Vac, Speed 18000 rpm, used in Barrel Pump Application. Motors for typically made for industrial application upto 1HP. The motor brushes are of carbon copper content for more life and better lubrication. With holders made of brass quality for long life. Motor RPM ranges from 8000 to 16000 with 30 minutes rating on load. Armature are dynamically balanced, supported with well lubricated ball bearings making the motor intact. To know details please contacts. Skeleton type are also available.

Motor Body is made out of carbon steel, end shields out of aluminium alloy. These are protected against corrosion by pretreatment and finally powder coated. Hard ferrite magnets with high coervice force are used to get high starting torque at nominal voltage. Motor can be made in any voltage required from min of 500 rpm to 5000 rpm. Motor gears are made of high tensile strenght polymides, long lasting life. Motor can be offer from 1 rpm to 300 rpm, gears can also be offered in phosphor bronze on request. Motor can also provided with magnetic incremental encoder with RPM indicator without increasing the size of the motor. Armature is dynamically balanced and supported with ball bearings.
These are face mounting motors and can be installed in any desired position.

Product Code:

PMGXXXX

Motor Body is made out of carbon steel, end shields out of aluminium alloy. These are protected against corrosion by pretreatment and finally powder coated. Hard ferrite magnets with high coervice force are used to get high starting torque at nominal voltage. Motor can also provided with magnetic incremental encoder and RPM indicator. Armature is dynamically balanced and supported with ball bearings. These are face mounting motors and can be installed in any desired position.