We manufacture cooling towers which are made from strong wood. Equipped with fans, these are efficient in working.

Specifications for Wooden type of Cooling towers:

• Casing and Louvers: Corrugated asbestos cement board casing is applied horizontally and lapped to shed water.
• Filling and Support:
  Cross Flow Towers: Filling is made up of splash bars with rectangular cross–section stacked in pyramidal fashion so as to provide more time & area for water-air contact. Counter Flow Towers: Filling is made up of splash bars with triangular cross-section which not only allow more time & area for air-water contact but also offers least resistance to air flow thereby reducing power consumption considerably. Splash bars and supporting structure frame are preservative-treated wood.
• Drift Eliminator: High efficiency, single bank, double pass system designed for maximum removal of water droplets at operating face velocities. Particularly herringbone type / double pass, restricts drift losses to mere 0.2% thus minimizing make up water requirement.
• Fan Assembly: Fan motor is totally enclosed.           Direct driven fan assemblies: The fan blades are fitted to Hub with help of U-Box / Clamps and have variable pitch. In this the fan assembly is dynamically balanced. Gear box driven fan assemblies – Motor is connected to gear box through a propeller shaft with flexible couplings at both the ends. The entire assembly is dynamically balanced to avoid vibration and is easy for maintenance. It is supported on a rigid fabricated M.S. HDG Frame.

This is another kind of cooling tower which are made of wood, FRP and metal. These cooling towers are completely fanless and are excellent in working. It is energy efficient cooling tower with zero maintenance.

Our convern is a leading names in manufacturing FRP induced draught counter flow cooling towers.

Following are its parts with their respective physical features:

Casing: 
Made of Gel coated fiber glass reinforced polyester and resins.

Fill: 
Honeycomb and ring type P.V.C. fills are continuously vacuum formed and specially treated to provide the maximum contact area for heat exchange.

The crossing of air and water streams in close proximity creates a diffused turbulence conducive to evaporation and efficient heat transfer.

Sprinkler: 
Cell Cooling Systems has specially designed sprinkler for uniform distribution of water over the honeycomb P.V.C. fill. 

There is no motor, but with the jet recoil force to rotate and distribute the water. This is made of cast aluminum to avoid corrosion. 

It consists of P.V.C. pipes, on which series of apertures are drilled longitudinally fitted on a light weight, aluminum rotary head and mounted on sealed ball bearings.

Fan:
We provide fans made of aluminum alloy, these blades are energy efficient. Alternatively Aerodynamic FRP hallow blades can also be provided on demand. This is trying to be in line with our basic aim of economizing cooling tower cost by significantly cutting down on power consumption.

Drift Eliminator:
To reduce carry over losses through entertainment of moisture drop in air strain. Cell Cooling Systems Pvt. Ltd., employ a unique honeycomb channel structure to effectively remove moisture from the rising air stream at the crucial moment.

Supports and Hardware:
All components like tower supports, motor supports, leg supports etc. are either hot dip galvanized or epoxy coated. Hardware is Galvanized Steel, Stainless Steel or Phosp

We understand that machines need repairing and improvments after every few time. So we provide jobs involving major repairs, overhauling, and rebuilds etc, which are of a very tedious nature and are neglected by many in the industry. In this way we are catering in a cost effective manner to various industries which might spend a lot . We are providing repairing for all the cooling towers even those which we are not producing. Along with repairing we also do performance upgradation.

We provide time to time checking of our prodcuts so that any loopholes can easily be eliminated. Our cooling towers are updated after each gap of time. We offer tailor-made solutions to our customers by creating required capacities thereby helping them to save costs considerably without compromising on the quality and output of the equipment.

We are widely engaged in providing spare parts which are utilized across the industrial usage. Our concern believes in providing optimum services for the clients regarding the product. They consist of following parts and their respective characterstics:

Fill: Honeycomb and ring type P.V.C. fills are continuously vacuum formed and specially treated to provide the maximum contact area for heat exchange. The crossing of air and water streams in close proximity creates a diffused turbulence conducive to evaporation and efficient heat transfer.

Sprinkler: Cell Cooling Systems has specially designed sprinkler for uniform distribution of water over the honeycomb P.V.C. fill. There is no motor, but with the jet recoil force to rotate and distribute the water. This is made of cast aluminum to avoid corrosion. It consists of P.V.C. pipes, on which series of apertures are drilled longitudinally fitted on a light weight, aluminum rotary head and mounted on sealed ball bearings.

Fan: We provide fans made of aluminum alloy, these blades are energy efficient. Alternatively Aerodynamic FRP hallow blades can also be provided on demand. This is trying to be in line with our basic aim of economizing cooling tower cost by significantly cutting down on power consumption.

Our annual maintaenence is provided on a contract basis to all our clients. Certain stipulated contarct period is created within which we provide all the maintenence services regaring the our prodcuts. Our such customer centric services have made us a preferred name to work with.