Cenlub Industries Limited

This pump has its own reservoir. It is piston type, where piston is actuated by a cam, integral with the handle of the pump. On operating the handle, pump discharges oil. As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq.cm. and so on. There is an in-built check valve and pressure reducing system in corporated in the pump. Pump is also equipped with relief valve, which safeguards it from overloading. Pump is also fitted with an oil window to crosscheck the level of oil in the pump and to refill the reservoir from the top opening, once the oil level is nearing the minimum point. Pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir. Suitable mounting holes are provided for vertical mounting of the pump. Pump outlet is suitable for 6 mm dia tube.

This pump has its own reservoir. It is piston type, where piston is actuated by a cam, integral with the handle of the pump. On operating the handle, pump discharges oil. As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq.cm. and so on. There is an in-built check valve and pressure reducing system in corporated in the pump. Pump is also equipped with relief valve, which safeguards it from overloading. The total pump is made out of S.S. Material i.e.body of the pump is S.S., piston and cylinder in S.S. while the rubber parts are viton. Suitable mounting holes are provided for vertical mounting of the pump. Pump outlet is suitable for 6 mm dia tube. The pump is suitable for water operation as well as other chemicals.

This pump has its own reservoir made of Aluminium Die Casting, where the mounting holes are projected on the side. It is piston type, where piston is actuated by a cam, integral with the handle of the pump. On operating the handle, pump discharges oil. As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq.cm. and so on. There is an in-built check valve and pressure reducing system incorporated in the pump. Pump is also equipped with relief valve, which safeguards it from overloading. Pump is also fitted with an oil window to crosscheck the level of oil in the pump and to refill the reservoir from the top opening, once the oil level is nearing the minimum point. Pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir. Suitable mounting holes are provided for vertical mounting of the pump, projected outside the back wall of the pump. Pump outlet is suitable for 6 mm dia tube.

This pump has its own reservoir made of ACRYLIC. It is piston type, where piston is actuated by a cam, integral with the handle of the pump. On operating the handle, pump discharges oil. As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq.cm. and so on. There is an in-built check valve and pressure reducing system incorporated in the pump. Pump is also equipped with relief valve, which safeguards it from overloading. The acrylic body of pump facilitates the crosschecking of the level of oil in the pump and to refill the reservoir from the top opening, once the oil level is nearing the minimum point. Pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir. Suitable mounting holes are provided for vertical mounting of the pump. Pump outlet is suitable for 6 mm dia tube.

This pump has its own reservoir. It is piston type, where piston is actuated by a cam, integral with the handle of the pump. On operating the handle, pump discharges oil. As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the Lubrication line is reduced to 1kg/sq.cm. and so on. There is an in-built check valve and pressure reducing system incorporated in the pump. Pump is also equipped with relief valve, which safeguards it from overloading. Pump is also fitted with an oil window to crosscheck the level of oil in the pump and to refill the reservoir from the top opening, once the oil level is nearing the minimum point. Pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir. Suitable mounting holes are provided for vertical mounting of the pump. Pump outlet is suitable for 6 mm dia tube.

This pump has its own reservoir made of ACRYLIC. It is piston type, where piston is actuated by a cam, integral with the handle of the pump. On operating the handle, pump discharges oil. As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq.cm. and so on. There is an in-built check valve and pressure reducing system incorporated in the pump. Pump is also equipped with relief valve, which safeguards it from overloading. The acrylic body of pump facilitates the crosschecking of the level of oil in the pump and to refill the reservoir from the top opening, once the oil level is nearing the minimum point. Pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir. Suitable mounting holes are provided for vertical mounting of the pump. Pump outlet is suitable for 6 mm dia tube

This pump has its own reservoir. It is piston type, where piston is actuated by a cam, integral with the handle of the pump. On operating the handle, pump discharges oil. As soon as the pulling force on the handle is released, piston returns back by spring force and the pressure in the lubrication line is reduced to 1kg/sq.cm. and so on. There is an in-built check valve and pressure reducing system incorporated in the pump. Pump is also equipped with relief valve, which safeguards it from overloading. Pump is also fitted with an oil window to crosscheck the level of oil in the pump and to refill the reservoir from the top opening, once the oil level is nearing the minimum point. Pump is also equipped with a suction strainer at the inlet and a drain plug at the bottom of the reservoir. Suitable mounting holes are provided for vertical mounting of the pump. Pump outlet is suitable for 6 mm dia tube

This is a simple pump meant for delivering oil in lubrication line. It is ideally suited for general purpose machine, where pump can be inserted into oil reservoir of the machine or can be mounted separately in machine casing below the reservoir. The pump is actuated by hand pull and release of handle for as many times as per lubrication requirement. It is advisable to attach a suction strainer before the inlet of the pump to avoid damage to pump's piston. This strainer is supplied as optional accessory. Relief valve, if required, is available as optional accessory Discharge : 7 cc per stroke Suitable for direct connection of 6mm O.D. Tube

Electrically operated Pump of 12V/24V DC It has built-in reservoir. These type of pumps are quite accepted on earthmoving equipment like shovels, dumpers, excavators, buses and trucks. These pumps have different plunger pumps which are connected to the secondary block on the chassis. Normally 3 plunger pumps are sufficient to cover 25-30 points. The pump is so designed that no foreign particle goes into its reservoir The reservoir once filled with grease is sealed with lock and key arrangement. Discharge Volume : 3 gms / min / pump Maximum Pressure : 200 kg/cm2 Reservoir capacity : 2.0 kg Grease : Upto NLGI 2 Pumping Elements: 3 max.

Discharge : 3 gms / min / pump Electric Supply : 12 / 24 Volt DC Reservoir capacity : 1 kg Grease : NLGI 2 Max. Pressure: 200 Bar

Discharge : 2gm /min/pump Eectric Supply : 24 Volt DC Reservoir capacity : 1 kg Grease : NLGI 1 With On - Off Cycle Timer

Mobile greasing units composed by pneumatic pump, flexible pipe, grease gun and trailer

CIL-R type is a single-line grease distributor which measures accurate amount of grease discharged from pump and it supplies oil to each lubrication suppliers in order. II. When distributor completes 1 cycle indicator moves back and forth on time. if any single pipe is blocked, distributor stops its operation. So, any problem can be detected immediately.

Pneumatic pumping system for greasing with 50:1 / 75:1 / 100:1 compression ratio. Safe : made in conformity with the EEC 89/392 directive and subsequent modifications. Body : anodized alluminium Sleeve : anodized alluminium Pumping : Carbon Steel Packing : NBR / Polyuretane Temp: +10 / +40 degree celcius Type of Fluid: Petrol. grease

It is a manually operated Grease Pump with two outlets. It has got a steel reservoir for storing the grease. On the first stroke of the handle grease comes out from the reservoir under heavy pressure of max. 150 kg cm2. When the handle is pulled back because of the positive suction and spring loaded piston, the grease is pushed into the suction port of the cylinder and ready for the next cycle. There is a telltale rod connected with the piston which indicates the level of the grease in the reservoir. For filling the grease into the reservoir utmost care must be taken against entry of any foreign particle into the reservoir. Grease can be filled from the bottom opening specified on the pump or from the top after opening the lid in both the cases grease quality must be ensured both in terms of lubricant as well as cleanliness. Discharge Volume : 1.0 cc/stroke Max. Pressure : 150 kg.cm2 Reservoir capacity : 700 cc Grease : From 00-NLGI 1 Net Weight : 1.75 kg