This is mini hydraulic power pack fitted with a motor and rotary positive displacement pump.
The unit is designed for intermittent run only and is best suited for single shot lubrication.
Unit is fitted with a suitable pressure switch, float switch and a transparent reservoir (for visually checking the oil level).
During on cycle, the electrically driven pump discharges the oil with high pressure, adjustable between 25-28 bars, with the help of an in-built relief valve, which is also safeguarding the system from over–loading and the pressure can be read on the pressure gauge fitted on the unit.
During off cycle the pressure in the lubrication line is reduced to 1 kg/sq. Cm. And so on.
The system is also provided with a bleed valve near the outlet port to automatically bleed air if entrained in system.
For vertical mounting of the unit, two holes are provided at the back of the system.
There is an inbuilt check valve and pressure reducing system incorporated in the pump.
This is mini hydraulic power pack fitted with a motor and rotary positive displacement pump.
the unit is designed for intermittent run only and is best suited for single shot lubrication.
Unit is fitted with a suitable pressure switch, float switch and a transparent reservoir (for visually checking the oil level).
During on cycle, the electrically driven pump discharges the oil with high pressure, adjustable at 28 bars, with the help of an in-built relief valve, which is also safeguarding the system from over–loading and the pressure can be read on the pressure gauge fitted on the unit.
During off cycle the pressure in the lubrication line is reduced to 1 kg/sq. Cm. And so on.
The system is also provided with a bleed valve near the outlet port to automatically bleed air if entrained in system.
For vertical mounting of the unit, two holes are provided at the back of the system.
There is an inbuilt check valve and pressure reducing system incorporated in the pump.
This is mini hydraulic power pack fitted with a motor and rotary positive displacement pump.
The unit is designed for intermittent run only and is best suited for single shot lubrication.
Unit is fitted with a suitable pressure switch, float switch and a transparent reservoir (for visually checking the oil level).
During on cycle, the electrically driven pump discharges the oil with high pressure, adjustable between 10-20 bars, with the help of an in-built relief valve, which is also safeguarding the system from over–loading and the pressure can be read on the pressure gauge fitted on the unit.
During off cycle the pressure in the lubrication line is reduced to 1 kg/sq. Cm. And so on.
The system is also provided with a bleed valve near the outlet port to automatically bleed air if entrained in system.
For vertical mounting of the unit, two holes are provided at the back of the system. There is an inbuilt check valve and pressure reducing system incorporated in the pump.
Unit is supplied with an adoptor (outlet port) of m10x1 tapping, fitted with a locking screw and a cone (ferrule), suitable for 6mm od tube.
Pneumatic pumping system for oil transfer with 1:1 / 3:1 / 5:1 / 3. 5:1 and 2. 5:1 compression ratio. safe : made in conformity with the eec 89/392 directive and subsequent modifications. Body : anodized alluminium Sleeve : anodized alluminium Pumping : carbon steel Packing : nbr / polyuretane / teflon
Pump is the heart of the system and therefore high reliability pumps are employed in oil circulatory systems. Any of the following types of pumps are generally used depending upon system requirements.
Gear pumps offer a cost effective solution and these are most commonly used for oil circulatory systems. Double and tripple screw pumps are selected for critical Application as there is no grazing of idle spindle with drive spindle and no wear and tear of moving elements takes place even when operating at high speeds. For application where pressure is low, centrifugal pumps are used. All these pumps are generally coupled directly to the motor through suitable frame. The pump suction is connected to the tank through suction filters or 'y' type strainers and pump output is fed to main oil supply line through check valves, gate valves etc. As per system requirements.
Alpha Power A company of up to 50 employees, we are a leading reputed manufacturer and supplier of pumping equipment, swimming pool heat pump and swimming pool pumps.
Processing...
