With over 2 decades of our experience in manufacturing XLPE cables, we have become a leading name in the industry. Available in customized options, our XLPE cables are in accordance with the industry established standards.

Advantages of central XLPE cables:

• Resistance to chemicals and corrosive gases, make them suitable for installation in polluted atmosphere
• Also supplied with flame retardant and low smoke sheath
• Better Resistance to surge currents
• Higher emergency over load rating
• Higher short circuit rating
• Longer designed life
• Higher current rating, permitting use of one size lower than with PVC Insulation
• Resistance to vibration and hot impact and local hotspots
• Higher resistance to moisture (100 times more than that of PVC)
• Simple jointing and termination compared to PILC and PVC Cables
• Higher insulation resistance (1000 times more than that of PVC
  
• Lower Installation cost, because of light weight, smaller dimension and more flexibility
• Low charging current (lower dielectric constant)
• Smaller bending radius

Technical specifications:

• XLPE insulated 1100v - 33kv, single core/ multiple cores, armoured/ unarmoured, aluminum/ copper conductor cables conform to the following standards:
• National standards- IS: 7098 Part I (1988) & Part II (1985)
• International standards- IEC 60502 & IEC 60811

 

We are a top-notch manufacturer of PVC cables, which are reckoned for its excellent electrical, abrasion, thermal and mechanical properties. Fabricated in accordance with the industry established standards, our PVC cables provide an advantage, where insulation is required to be resistant to fire.
 
Technical data:

• PVC insulated 240v-11kv, single core/ multiple core, armoured/ unarmoured, aluminum / copper conductor that are in conformance with the following standards:
• National standards-IS: 1554 Part-I (1988) & Part-II(1988)
• International standards- BS-6346(1989), VDE-0271(1986)

We put forth a range of aerial cables or aerial bunched cables, which are manufactured using PVC / polyethylene / cross linked polyethylene insulation with aluminum conductors that are twisted over a central bare/ insulated aluminum alloy messenger wire Used for overhead distribution of power, our messenger wire serves as the earth cum neutral wire. The phase conductors are therefore not under tension.

Technical Data:

• XLPE, PVC, polyethylene insulated, 1.1 kv-33kv that conforms to the following standards:
• IS: 14255(1995), IS:7098 Part I(1988) & Part II(1985)
• IS:1554 Part-I (1988) & Part II(1988)

We hold expertise in providing a gamut of FRLS cables (fire retardant low smoke cables), which accordance with the industrial standards. Available in tailored options, our fire retardant low smoke cables are priced competitively.

Features and specifications:

• High temperature index that is greater than 250°C as against 120°C for general purpose PVC
• High resistance to flame propagation
• Low emission of acidic fumes, reducing corrosion
• Low toxic gas generation
• Critical oxygen index much greater than general purpose PVC
• High resistance to ignition
• Low smoke emission thereby not obstructing visibility

Our FRLS cables conform to the following specifications:

• IEC 2843
• IEC 2863
• IEC 754 Part-I
• IEC 332 Part-II
• IEEE 383
• SS 421475 

We offer a spectrum of control cables, which are PVC insulated color coded cables (earthed or unearthed )that are used for control circuits in industrial installations such as power plants, steel plants, cement plants and other allied units as well as signaling network of railways.

Manufactured using premium grade raw material such as solid / stranded annealed, bare / tinned copper wire that is usually 1.5 sqmm or 2.5 sqmm in size and ranges from 2 cores to 61 cores, our control cables as per international standards. Further, the round wire / flat strip are used for armouring.  Our control cables are capable with d.c. systems for rated voltage up to 1500 V.
 
Specifications:

• PVC insulated 650 / 1100 V cable
• Conforms to:
• National standards: IS: 1554 Part I (1988), IS: 8130(1984.)
• International standards: BS 6346, IEC 227-I

Our range of power cables also includes instrumentation cables, which are ideal for process control, A/D converters and other modern microprocessor based instrumentation circuits. Designed to offer excellent resistance to electrical noise and induction phenomena that interfere in instrumentation circuits, our instrumentation cables fabricated with soild, stranded, bare, tinned, silver plated annealed, high conductivity EC grade copper with sizes ranging from 0.5 sq.mm to 2.5 sq.mm in multi core, multi-pair, multi-quad and laid up concentrically or in units. Further, the insulation is done by PVC , solid PE or thermoplastic material heat resistant compound.

Technical Data:

• PVC insulated 650 / 1100 v cable
• Standards conforming to
• National Standards: IS: 5608 I, II, III,
• International Standards : BS 5308 Part-I, BS 1584 Part-I,II,III, IEC189-5 Part-III,BS 6360, BS 5099 Part-II

We hold expertise in providing a gamut of mining cables, which are manufactured uing qualitative raw material. Owing to its ability to fulfill the requirements of coal such as:

• Armour conductivity at least 75% of main conductor conductivity
• Copper as conductor

Our cables are differentiated with "MINING” embossed on the outer sheath.