Metal Glaze Resistors,Load Bank Resistors,Metal Glaze Resistors Manufacturers,Load Bank Resistors Manufacturers,India

Home

Profile

Products Range

Enquiry

	Quick Search

Products Range

Metal/Carbon Film Resistors

Metal Oxide Resistors

Metal Glaze/Thick Film Resistors

Thick Film Hybrid Resistors

High Voltage Resistors

Unlacquered Resistors

NGR-Nutral Ground Resistors/Load Bank Resistors

Wire Wound Resistors

Wire Wound Power Resistors

Al. Housed Wire Wound Resistors

Dynamic Breaking Resistors

Zero Ohm Resistors

Electrical Resistors

Cermet is a leading manufacture of electronics/electrical resistors in India with rich experience of 42 years in research & development.Cermet is eco-conscious RoHS compliance company, manufactures of Thick film/Metal Glaze/High Voltage/Hybrid resistors in India and have the widest range of Carbon film/Metal film/Wire Wound, Metal Oxide resistors and Wire Wound Power resistors up to 1200 W. Cermet! has a large network of dealers all over India. It directly caters to the requirements of over 450 small and big industries. Cermet also has exports to China, Russia, Middle East and Brazil. Cermet also has the first state of the art hybrid resistor manufacturing facility in India. The major breakthroughs achieved by the Cermet team are metal glazed resistors, fusible film & fusible wire wound resistors, hybrid network resistors, power film resistors,dynamic breaking resistors, resistor load banks, edge wound resistors etc. Cermet has one of the most well equipped Q.C.

Metal/Carbon Film Resistors

CMR series, metal film is a group of metal film fixed resistors applying high alumina contents base material vacuum sputtered by NiCr alloy film and excellent heat proof special resin for protective coating. Produce by fully automated process available in 0.25w to 2w & standard tolerance 0.1% to 5%.Lower TCR available 15 ppm to 100 ppm. Confirms to defense standard jss 50401.Flame proof coating are also available on request.

CCR series, carbon film resistors TCR is relatively high; supplied in tape form for automatic insertion systems popularly used in consumer electronics application.

Send Business Enquiry

Metal Oxide Resistors

CSN series is a electric power type high reliable fixed resistors with a special metal oxide film thermo chemically burned on the high heat conducive based material, coated with flame resisting non flammable coating.

CMSN series is available in small size metal oxide film resistors with high alumina content ceramic cores. These are comparatively small, electrical & mechanical stability, high reliability.These have low noise with high resistance value. Epoxy coating and marking resist trichloroethelyne, freon and other cleaning agents.

Send Business Enquiry

Metal Glaze/Thick Film Resistors

CMGR Series, metal glaze elements on ceramic substrate with a tinned copper wire terminal and are coated with special epoxy coating very high ohmic value upto 200G ohms. These have extremely high stability, accuracy & reliability.

CSK Series, Thick film metal oxide resistors having high resistance value in a small size. Low noise, high heat dissipation. Available upto 12W.

Non inductive type & unlacquered types are also available.

Send Business Enquiry

Thick Film Hybrid Resistors

Thick film resistor Hybrid network have Metal Glaze elements on the high alumina Ceramic Substrates with a strong clip constructions terminals. These are coated with a high temp & high insulation resin.They are designed single in line and are most suitable to meet the density of circuit assembly.These have extremely high stability, accuracy and reliability.
Custom built design with a wide range of application is available on request.

Send Business Enquiry

High Voltage Resistors

CVH series developed with indigenous technology first time in India. Having very high ohmic resistance value up to 200 Gega ohms, voltage with standing up to 25 KV & surge with standing up to 50 KV. Coated with high insulating epoxy paints.

Popularly used in:

1) Particle accelerators, infrared image converters, Ionization chambers, and nuclear instruments.
2) Matched sets for voltage dividers and sticks for bleeder resistor chains.
3) Navigational radars and communication equipments
4) High voltage probes and HV power supplies.

Send Business Enquiry

Unlacquered Resistors

CUL series is a glass based Thick Metal Oxide film fired at 850°C. Scratch proof film ensures high stability. No reaction or contamination with Capacitor oil. Most preferred application is for HT Capacitor discharge application.

This is also available in a Flat type construction.

Send Business Enquiry

NGR-Nutral Ground Resistors/Load Bank Resistors

Protect power systems equipments against short circuit 5 lighting features, Rated current upto 5000 Amps, Rated Voltage: 33 KV, Rated time 1 Sec. to continuous.

All stainless steel resistor element & terminal suitable for indoor / outdoor as per IS 2147 All units triple insulated, design & Tested as per IEEE-32 –1972.
Optional : CT, PT'S contactors, relays, isolator etc. can be provided.

Send Business Enquiry

Wire Wound Resistors

CSIA series is a high grade Ni-Cr wire wound element on ceramic core, coated with non-corrosive high insulating flame retardant material.Aryton-Perry winding ensures low inductance. CCA series is encased in Ceramic cases suitable for printed circuit board mounting.

CCV series is a vertical mounting ceramic stand off for space savings on PCB's.

CCT series is a terminal stand-off height which are adaptable to wave soldering.

CVF series is a Low inductance Ni-Cr ribbon element encased in a slim ceramic case.

Send Business Enquiry

Wire Wound Power Resistors

CSFR series is a high power wire wound industrial grade resistors up to 1200 W. Most suitable for load bank, high stabilty, flame proof silicon coated. Non Inductive. Custom built mounting brackets are available. Multi- terminal types and adjustable types are also available.

Send Business Enquiry

Al. Housed Wire Wound Resistors

CAH series is a professional grade Aluminum housed wire wound resistors with a screw mounted chassis to enhance heat sink effect & complete environmental protection. Non-inductive type, very low ohmic values are also available.

Send Business Enquiry

Dynamic Breaking Resistors

Range up 100 KW, double insulated for 1000V maximum temperature rise 375°C Modular design : resistors in WWR, edge wound, corrugated ribbon or grid type with or without enclosure. Suitable for indoor or outdoor application, custom built & standard version are available.

Application:

AC / DC drive

Traction

Crane

Conveyor

Centrifuges etc.

Send Business Enquiry

Zero Ohm Resistors

CZ series is a molded jumper wire or jumper wire mainly used for inter connecting devices between two points on a PC board.Generally used due to change in design that requires new point connections, circuit tuning by changing point connections.

Send Business Enquiry

Products Range

Home | Profile | Products Range | Contact Us | Enquiry