Electrical Voltage Resistors

CZ series is a molded jumper wire or jumper wire mainly used for inter connecting devices between two points on a PC board.Gener­ally used due to change in design that requires new point connec­tions, circuit tuning by changing point connections.

CUL series is a glass based Thick Metal Oxide film fired at 850°C. Scratch proof film ensures high stability. No reaction or contamination with Capacitor oil. Most preferred application is for HT Capacitor discharge application.

This is also available in a Flat type construction.

CVH series developed with indigenous technology first time in India. Having very high ohmic resistance value up to 200 Gega ohms, voltage with standing up to 25 KV & surge with standing up to 50 KV. Coated with high insulating epoxy paints.

Popularly used in:

1) Particle accelerators, infrared image converters, Ionization chambers, and nuclear instruments.
2) Matched sets for voltage dividers and sticks for bleeder resistor chains.
3) Navigational radars and communication equipments
4) High voltage probes and HV power supplies.

Thick film resistor Hybrid network have Metal Glaze elements on the high alumina Ceramic Substrates with a strong clip constructions terminals. These are coated with a high temp & high insulation resin.They are designed single in line and are most suitable to meet the density of circuit assembly.These have extremely high stability, accu­racy and reliability.
Custom built design with a wide range of application is available on request.

Range up 100 KW, double insulated for 1000V maximum temperature rise 375°C Modular design : resistors in WWR, edge wound, corru­gated ribbon or grid type with or without enclosure. Suitable for indoor or outdoor application, custom built & standard version are available.

Application:

• AC / DC drive


• Traction


• Crane


• Conveyor


• Centrifuges etc.
  

Protect power systems equipments against short circuit 5 lighting features, Rated current upto 5000 Amps, Rated Voltage: 33 KV, Rated time 1 Sec. to continuous.

All stainless steel resistor element & terminal suitable for indoor / outdoor as per IS 2147 All units triple insulated, design & Tested as per IEEE-32 –1972.
Optional : CT, PT'S contactors, relays, isolator etc. can be provided.