Turbine Flow Meter & Accessories

We are highly instrumental in offering a wide range of Mini Flow Meter. These mini flow meter offered by us are derived from the family of low flow rate measurement devices based on pelton wheel like rotor. In addition to this, the offered range provides flow measurement from 0.007 GPM to 3.5 GPM in twelve over lapping ranges. The offered range of mini flow meter is widely utilized in different low gas applications as a high accuracy flow transducer.

Our firm is a leading name, which is engaged in offering a wide and superior range of Flow Computer & Indicator. These flow computers & indicators offered by us are utilized to control the variety of flow applications ranging for simple volumetric flow rate indication / tantalization to mass flow measurement. Along with this, the offered range is admired among the clients, owing to its flow meter linearizion & RS 232 or RS 485 communications.

Application areas:

• Batch processing
• Cryogenics
• CNG

In order to meet the diverse requirements of esteemed clients, we are delivering a wide and superior range of Turbine Flow Meters for Liquid Service. These turbine flowmeters offered by us are manufactured utilizing optimum grade raw material, which is sourced from the dependable vendors of the market. Along with this, the offered range is appreciated for below stated features:

• Low cost
• Outstanding accuracy
• Provides wide flow ranges (10:1 to 100:1 turn down ranges available)
• Wide variety of process connections available
• Wide selection of construction materials
• Operate over a wide range of temperatures and pressures

Specifications:

• Over range: 150 % of maximum flow (intermittently)
• Linearity: ± 0.5 % of reading ( ± 0.25 % typical) over tabulated linear flow range
• Repeatability: ± 0.1 % ( ± 0.05 % typical) over tabulated repeatable range
• Available turn down range: 10 :1 to 100 : 1
• Available temperature range: - 450° F to + 450° F standard high temperature option to +850° F
• Refer to various flow meter configurations for pressure ratings, outline dimensions and available sizes
• Pressure drop characteristics: 4 to 5 PSI at maximum linear flow rate at one CSTK
• End fittings: Available in NPT, MS flared and flanged styles. Other types available on request
• Bearing styles: Ceramic hybrid ball bearings and sleeve bearings in tungsten carbide and hard carbon composite are available
• Material: 316 stainless steel standard. Consult with applications group for corrosive applications. Broad material list available

Our firm ensures to dispatch the offered range of Premier Gas Series Turbine Flow Meter. These premier gas series turbine flowmeter offered by us are known to find out the volumetric flow of gas through a pipeline. Angular velocity is directly proportional to the velocity of the gas being measured. The rotor blades pass a non-intrusive pickup coil that generates an electrical signal, referred to as a pulse as soon as the turbine starts. At a at a reference density of .1 /Ft3. A 10 point calibration certificate (traceable to NIST or other recognized national laboratory) is supplied with each meter the calibration process for these products are done.

Benefits:

• Exceptionally wide flow turn down ranges
• Multiple rotor assemblies available with varying blade angles in each meter size to optimize meter performance for the flow range
• Multiple coil outputs for signal redundancy, direction detection and meter diagnostics
• NIST traceable gas calibrations with uncertainties to ± .25 % available
• Self-lubricating, ceramic hybrid ball bearings require no external lubrication or maintenance
• CE, CSA, cenelec and various other approvals available on most versions of the premier gas meter
• Meter design does not require seals or o-rings, no through holes in housing
• Significantly lower pressure drop compared to conventional “turbo” flowmeters
• Over 100,000 installations worldwide.
• Limited number of internal parts reduce friction, increasing accuracy and repeatability, while limiting replacement/wearing parts
• Can be installed in either a horizontal (preferred) or vertical orientation

We are comprehensively delivering a wide and an unparalleled range of Turbine Flow Meters for Liquids & Gases Product. These products offered by us are used to check the liquid and gas flow in medium to large diameter pipes with accuracies as per the turbine flowmeter at a substantially better prices rates. In addition to this, the offered range is available in different specifications such as fixed, adjustable, bi-directional and high pressure.

Features:

• Low cost
• Low pressure drop
• Wide flow turndown ranges for both liquids and gases
• Outstanding accuracy
• Applications from 4” to 72” pipe diameters. Specials upon request
• Process connection flexibility
• May be installed or removed from active line without stopping service
• 20 to + 400° F standard operating temperature range with viton seal

To meet the diverse requirements of respected customers, we are offering a wide range of Flow Indicator. These flow indicators offered by us are known as HIT-2A and are a DC, AC, loop or battery powered indicator, which is able to accept magnetic pickup, DC pulse or switch closure inputs. In addition to this, the offered range is appreciated among the clients for its featuring 5 digits of rate and 8 digits of total. This range is available with optional powered loop 4-20mA output, which is utilized to render power.

Features:

• 5 digit rate display, 8 digit totalizer display
• Local magnetic or remote reset
• 4-20 mA analog output
• Powered from battery, DC supply, 4-20 mA output
• Loop or AC line
• 20 Pt. linearizion option
• Isolated scaled pulse output
• Alarm output for rate or total
• Windows® configuration program
• RS 232 port for configuration and monitoring
• Diagnostics for pulse, alarm and analog output
• Password protection for menu and reset