Industrial Equipments

CSI 102 (B) Autoclave Horizontal (Triple Walled) (Cylindrical)

Construction: Triple walled construction inner chamber is made of high grade stainless steel sheet of SS-304 Grade. The outer body is also made of thick stainless steel. The coiler is made of S. steel. The lid is made of thick steel plate. The unit is duly fitted with highly efficient M.S. Painted ring & radial locking system duly chrome plated. A three way valve or a multi port valve made of stainless steel is installed for controlling the cycle. The pressure is adjustable from 5psi to 20psi; pressure is controlled by automatic pressure control switch. Fitted with water level indicator and vacuum breaker. The unit is fitted with temperature gauge, vacuum breaker and steam tap. The whole unit is mounted on a robust tubular stand made of MS duly painted with attractive stove enamel.

CSI 102 (A) Autoclave Vertical High Pressure (Triple Walled) (For Dry Sterilization)

Most useful for sterilizing the loaded material under a steam pressure of 5to20 p.s.i. (Adjustable with pressure control switch). It has inner chamber, steam jacket and outer wall made of S.S. duly argon are welded. The space between outer wall and steam jacket is filled with high grade glass wool to minimize the temperature loss. All sterilizers are hydraulically tested upto 40 P.S.I. the lid is made of thick stainless steel and closed by wing release valve, pressure gauge and S.S. basket. Supplied complete with cord and plug to work on 220/230 volts A.C. supply. Fitted with vacuum breaker as a safety device

OPTIONAL ACCESSORIES

Automatic pressure control switch (AUTOMATIC INDFORSS PIEZOSTAT)   

Automatic low water level cut-off device

Automatic 0-60 minutes ”GERMAN” Timer  

Digital temperature display

CSI 101  Autoclave Vertical

It is used for sterilization under saturated steam pressure at any selected point between 5to20p.s.i.(optional adjustable with pressure control switch). These are double walled units with inner chamber (boiler) made of 18 S.W.G. stainless steel and outer chamber is covered with M.S. lid is tightened by radial locking system. Fitted with neoprin rubber gasket, all systems are hydraulically tested upto 40 P.S.I. as a safety measure. All autoclaves are fitted with standard accessories such as water level indicator, pressure gauge, steam release cock, spring loaded safety valve and heating element. Supplied complete with S.S basket, cord and plug to work on 220/230 volts A.C. supply.

ALL DELUXE MODELS besides being fitted with stainless steel/LID and having inner chamber made of S.S. and outer chamber stainless steel, are also fitted with VACUUM BREAKER as a SAFETY DEVICE

OPTIONAL ACCESSORIES

Automatic pressure control switch (AUTOMATIC INDFORSS PIEZOSTAT)   

Automatic low water level cut-off device

Automatic 0-60 minutes ”GERMAN” Timer  

Digital temperature display

CSI 103 Autoclave Portable (Made Of Aluminium)

Fitted with pressure gauge upto 20psi. Spring loaded safety valve adjusts a dead weight safety valve. It is hydraulically tested upto 40psi and is supplied with, electrical fittings, cord and plug to on 220/230volts A.C. supply.

Supplied complete with tripod stand.

CSI 104 Cement Autoclave

Complete with safety, pressure gauge and automatic pressure control switch.

Inner chamber made of MILD STEEL

Inner chamber made of STAINLESS STEEL

CSI 105  B.O.D. Incubator (Low Temperature)(super deluxe Digital model)

Most versatile for biochemical oxygen dead determinations. Castor wheel mounted cabinet is double walled with inner chamber SS and outer wall of MS sheet duly powder coated. The gap of 75mm between the outer of the inner wall is fitted with special grade wool to prevent thermal losses. Triple walled back of the unit is fitted two air circulates fans maintaining temperature uniformity throughout the chamber, fully view inner glass/ Acrylic door permits inspection of specimens, without disturbing the same. Lock and key arrangements is provided in the double walled outer door. Unit is fitted with door operated illumination lamp inside the chamber. Refrigeration unit is formed by ISI marked compressor, the front panel is provided with separate indicator lamps for main, heating and incoming voltage.

Supplied complete with 3 shelves, cord and plug to work on 220/230 A.C. supply. Temperature from 5.c is controlled by MICRO PROCESSOR ELECTRONIC DIGITAL TEMPRATURE INDICATOR-CUM-CONTROLLER with an accuracy of +_ 0.5.c.

OPTIONAL ACCESSORIES

Interior illumination with 3nos.flouresent tubes (temp.10to50.c)

Automatic voltage stabilizer 3kva(TRIPLE RELAY)

All S. Steel body 304/202 grade for GMP standard……..

CSI 106  Seed Germinator (Signal Chamber)(with digital temp. controller)

Most suitable for conducting various experiments on a variety of seeds under different conditions of temperature and humidity. Atmospheric conditions are created within the chamber to perform different experiments without gone the field.

The double walled unit has inner chamber made up of SS and outer chamber of MS sheet duly powder coated. Temperature from 5.c+_1.cis controlled by digital temp. Indicator=cum-controller. Humidity (not Adjustable) is created in a SS water reservoir fitted at the bottom to provide 90% to 95%+_3%RH humidity. Supplied complete with 14 adjustable perforated trays. Complete with cord and plug to work on 220/230 V.A.C. Supply.

INSIDE CHAMBER SIZE SS(304grade)

555mm(W) x 910mm(H) x 605mm(D) (22”x36”x24”)

CSI 107  Seed germinator (Dual chamber)

Details same as scientech-106, but with dual chamber having following parameters:-fitted with heating and cooling system in both the chambers. so as to control temperature from5.c to 50.c+_1.cin both chambers (Supplied with 14 trays)(Cooling in both chambers)inside size of each chamber SS(304 grade) 555mm(W)x910mm(H)x605mm(D)(22”x36”24”)

OPTIONAL ACCESSORIES

Exterior illumination arrangement (For each chamber)

Automatic 0-24hrs timer (for each chamber)

Digital humidity control arrangement 45%to95%+_3%RH(for each chamber)

Automatic voltage stabilizer 3.0kva (triple relay) (for each chamber)

CSI 108 Humidity And Temperature Control Cabinet

Suitable for carrying out different quality control tests under controlled conditions of temperature and humidity.

Inner chamber consists of S.S. and outer wall of ms sheet duly powder coated. The gap of 75mm between the outer and inner wall is filled with special grade glass wool/puf insulation to prevent thermal losses.

A self cooler air circulation fan maintains uniform temperature and humidity conditions throughout the chamber temp. range from 5.c above ambient to 60.c is controlled by “JUMO”/”EGO”GERMAN thermostat

With an accuracy of +_1.c. humidity is controlled throughout an imported humidistat thus controlling the desire set humidity range from atmospheric humidity to 95%+_3%.

INSIDE CHAMBER SIZE   S.S. (304 Grade)

455mm(W)x710mm(H)455mm(D) (18x28x18)

605mm(W)x605mm(H)605mm(D) (24x24x24)

605mm(W)x910mm(H)x605mm(D) (24x26x24)

CSI 109  Humidity And Temperature Control Cabinet (Refrigerated)

Same as CSI-108 but provided with refrigeration system to control temperature range from 5.cto60.c+_2.c and humidity 40%to95%+_3%and fitted with electronic digital temp. & Humidity indicator cum controller.

INSIDE CHAMBER SIZE    S.S. (304 Grade)

455mm(W)x710mm(H)x455mm(D) (18x28x18)

605mm(W)x605mm(H)x605mm(D) (24x24x24)

605mm(W)x910mm(H)x605mm(D) (24x26x24)

OPTIONAL ACCESSORIES

Hygrometer(DIAL TYPE HUMIDITY INDICATOR)

Wet and dry thermometer

Automatic voltage stabilizer3.0kva(Triple relay)(ONLY FOR SE-108)

PID TEMPERATURE CONTROLLER MICRO PROCESSOR.

DIGITAL TEMP & HUMIDITY CONTROL (FOR CSI-108)

CSI 110  Plant Growth Chamber

It has outer wall made of ms sheet duly powder coated and inner wall made up of heavy gauge S.S. sheet. The gap between inner and outer wall is fitted with high grade glass wool to avoid thermal loss. Besides outer double walled door, a full view inner glass door allows inspection of test sample without disturbing the inner chamber conditions. Unit is supplied with three adjustable perforated shelves. Temperature range from 5.cto50.c+_1.c is controlled by DUAL SETTING DIGTAL temperature indicator-cum-controller so as to set two different temperatures for day and night. Exterior illumination with fluorescent tube fitted on both side of the chamber accounts for artificial day light, and the cyclic illumination conditions are regulated by automatic 0-24 hrs. Timer, when all the tubes are on temperature from 15.c can be from ambient to 50.c and the same is achieved by means of injecting steam . Arrangements for increasing the humidity are provided and not for decreasing.

OPTIONAL ACCESSORIES

Digital humidity controller

CSI 111  DE-Humidifier(Fitted with time controlled safety device, in case humidity controller fails, for safety of the compressor)

“SCIENTECH” Dehumidifiers are water condensing type. Base on “Refrigeration cycle” to avoid use of expensive chemicals required for desiccant type models. The unit is self stating and is mounted on a study angle iron frame, fitted with caster wheels, dehumidifier excess moisture from the atmosphere and it fitted with hermetically sealed compressor. Heat exchanger and water condensing coils are made of S. Steel collection tank is provided below the unit to collect condensate water, humidity is controlled by automatic HUMIDISTAT incorporated in the unit upto 30%+_#% RH, depending upon the ambient conditions. To achieve very low humidity, the room should have a independent window type air conditioner to achieve very low humidity, the room should have a independent window type air conditioner to match with the dehumidifier heat load in the room. Suitable to work on 220/230 volts A.C. supply.

CAPACITY:1.5 tone

OPTIONAL ACCESSORIES

Automatic voltage stabilizer 4.0 KVA.(TRIPLE RELAY)

S. Steel body extra

Digital humidity state

CSI 112  (A) Deep Freezer

Double walled with inner chamber made of SS/ plastic and outer of thick PCRC sheet duly enamel painted. Temperature range from ambient to -20.c is achieved by PUF insulation to avoid thermal loss. Body is mounted on a study angle iron frame and is mounted on castor wheels. Unit is fitted compartment whereas vertical models are supplied with three storing shelves.

OPTIONAL ACCESSORIES

Automatic voltage stabilizer 4 KVA.(TRIPLERELAY)

CSI 112  (B): Lyophilyser (Freezer Drier)

It is used for pro- reservation of blood plasma, plants etc. without damaging their cell structure, with cooling contender, vacuum drum and pump in steel cabinet.

3 Liter (condensate cap)

5 Liter (condensate cap)

Model

SH-22

SH-32

SH-42

SH-62

Working size

2’x2’x2’

3’x2’x2’

4’x2’x2’

6’x2’x2’

Size of HEPA filter

2’x2’x6”

3’x2’x6”

4’x2’x6”

3’x2’x6”

No. of HEPA filter

1

1

1

2

Illumination

1x20w

1x20w

2x40w

2x40w

Prices

Deluxe model

2”x2”2”

3”x2”2”

4”x2”2”

6”x2”2”

Power Coated

Complete in storing MS Body/:

Complete in S.S body

Detail same as se 113 but with laminar air flowing vertically from top towards the work table.

CSI 114  Biological Safety Cabinet/ Sampling Booth

The cabinets are fabricated out of thick board duly sun mica clad. Interior surfaces are epoxy painted for its longer life. The work table is made heavy gauge S.S. sheet and is fitted with U.V. germicidal

Light, static pressure manometer, exhaust system (Suitable for 6 feet duck) and virus brun out unit side panels are made out of thick transparent plexi glass duly framed. The unit is fitted with pre-filter and HEPA filter. Air is drawn through pre- filter and is made to pass through highly effective HEPA (High efficiency particular air) filters having efficiency particular air) filters having efficiency retaining all air- borne particles of size 0.3 micron and larger. Using a dynamic balancing machine, the blower and motor assembly is statically and dynamically balanced. Motor of ¼ H.P. Capacity operates with minimum noise level. The working area is illuminated by fluorescent lighting fitted to the unit. The high of the working table provides a comfortable “SIT DOWN” working position for the operation for the operator. In addition to the above futures of a standee vertical laminar flow bench the “SCIENTECH” bio-safe cabinets have arrangements for re-circulating a part of the air thus creating highest level of clean air.

The unit is also convertible to the conventional vertical laminar flow bench with downward air flow by lifting the sliding front door upwards. Air is sucked through the pre-filter and the excess air is thrown out from the top. Through a HEPA filter of size 1’x1’x6’ supplied with glove ports and gauntlets. HEPA filter UV light and fluorescent light.

OPTIONAL ACCESSORIES

Exhaust ducting (per running feet)

Gas burner

Virus burn out unit

CSI 115 Fume Hood

Fabricated out of thick wooden board these are designed so as to throw- out al toxic/harmful vapors, thus protecting costly instrument and the person working in the lab. Outer is finished with sun mica and inner epoxy painted working table top is fitted with acid/alkali resistant tiles/s. steel and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weight. The unit if fitted with fluorescent light and a gas cock for gas/ air supply. The space under the work station can be provided with strong compartments for storage purposed. The front facing panel is fitted with 1/5 AMP socket with switches for exhaust system and flour scent light. To work o 220/230 volts AC supply.

OPTIONAL ACCESSORIES

PVC fume duct (Per ft.)

Inner chamber FRP/SS (perfect)

Lining on working walls extra 

CSI 116 Air Curtain

An air curtain is a modern device which, when installed on a door, forms an invisible  curtain of continuous air and thus prevents escape of conditioned air and entry of out side hot, humid, dirty and unwanted polluted air. The cabinets of air curtain are made of cold rolled mild steels. The blowers are made of high quality aluminum sheets duly balanced both, statically as well as dynamically on computerized digital balancing machines, to provide uniform air with minimum noise and no vibration. All units are thoroughly tested att works and meet the highest standards. The motors used are off continuous rating with sealed ball- bearings. HIGH VELOCITY MODELS (approx 10 meters/ second).

GMP model S.S. body also available……………………………P.O.R.

CSI 117 Tissue Culture Hood  (Made of sun mica clab thick wooden board)

Made out of sunmica clad thick wooden board. And sunmica clad working top the unit frame at front fitted with transparent plexi glass and has an arrangement for keeping the door open if desired. Outside

Size: 1200x600x600mm(ht.at back) (4”x2”2”)

OPTIONAL ACCESSORIES

Build in U.V. Germicidal light

Build in fluorescent light.

S.S.Top in lieu of Sunmica top

Exhaust system to cost extra

CSI 118 Inoculation Chamber

Made of sunmica clad thick wooden board and plywood at back. Thick non- ratting plexi glass window provided on two sides and front folding glass door. In side sunmica clad lower portion is provided with glove ports and gauntlets on front window. Provided with one fluorescent tube and gauntlets on front window. Provided with one fluorescent tube and one ultra violet tube.

Outside size: 40”x24”x22’’

Outside size:27”x20”x16”

CSI 119  Rotary Vacuum Evaporator (Buchitype) (variable speed)

The apparatus consists of an evaporating flask rotated by sparking induction motor in a heating water bath. Vacuum distillation of solvent at high and low temperature is achieved quickly and efficiently by use of a VARIABLE SPEED motor, which prevents foaming and bumping of the liquid (Solvent) into the evaporating flask and also distillation under controlled atmosphere the evaporating flask is pear shaped to give a large surface area of evaporation and is champed to a glass duck which goes through the drive unit and protrudes about 120mm into the condenser. The condenser is fitted with standard joint at the top and the bottom for receiver flask the unit is fitted with a quick action jack. capacity I liter (without water bath & vacuum pump)

OPTIONAL ACCESSORIES 1Liter

Thermostatic water bath (SS

–do- but digital model

Vacuum pump

Micro attachment set

Condenser double coil

Rolaling flask

Collection flask

Clip for holding ball joint 50mm

Clip for holding B-24 (joint)

CSI 120 Distillation Apparatus All Glass (Electrically Heated)

The assembly consists of a glass flask with embedded heating elements fused in spiral with type glass coil internally at bottom. A double wall coiled condenser has standard ground glass joints. Complete with glass fitting metallic stand, ring clamps and electrical fittings. The unit supplied is as per NPL patent design. To work in 220/230 volts A.C. supply.

OPTIONAL ACCESSORIES 1Liter

Automatic low water level cut off device in case water supply is stopped.

With Qurtz heater vertical fitted (Each heater)

CSI 121 All glass distillation unit, with quartz heater tube, vertical type.

These units consist of main boiler. A built in heater enclosed in quartz glass tube. Housing auto water level adjuster, bottom outlet for cleaning waste discharge which is fitted with Teflon screw cap valve. A coil condenser fitted on top for condensing vapors. The whole unit is mounted on epoxy coated metal box stand & covered with acrylic sheet cover for protection. Power supply unit is in built no extra attachment is required. Housing study & reliable power system require 1kw power per heater.

These distillation units are more compact, require less space, reliable. Easy to operate on continue basis.

CSI 122  Water Still (Wall Mounting)

The unit is recommended for making progeny free distilled water of a very high degree of purity. Made out of S.S. special kettle element is fitted with ejection device/auto cut for safety of the element  is provided water supply is stopped. The cock fitted to the unit is of brass C.P.A wall mounting clamp is provided with the unit. Supplied with cord and plug to work on 220/230 volts A.C.

csi 123  ro-wall mounting

8 to 10 liters per hour output it consists of per filter, sediment filter, activated carbon filter, ro. membrane imported, booster pump imported, post carbon filter auto inter control, auto storage tank control,8 liters strong tank.

CSI 124  Water Still (Table Patern- Barnstead type)(Made Of Stainless Steel)

Double walled construction with inner and outer and chamber made of S.S. the gap in between being filled with glass wool. The condenser and top are also made of S.S. the raw water is first made of pass around the tubes in the condenser where it gets heated nearly to the boiling point thus economizing the heating energy. The heated water passes to the evaporator through a water level maintaining pipe. Excess water is let out through the drain, to work on 220/230volrs Ac supply.

CSI 125    Deonizer (double bed)

It consists of an in –built profiler and very high exchanging  capacity  non- corrosive caption and anion resin columns profiled with  imported RESINS for efficient result having treated water parameters conforming to IS-1069/64. it yields chemically pure water equal to multiple distilled water having conducting of less than 10 micro siemens /cm and ph of 7.0 to 9ph. Fitted with a sturdy PVC multi-control valve and can be connected direct to water taps. The conductivity meter operettas on both AC supply and 9.0v DC battery. Supplied with one plastic chemical proof regeneration tank and the complete unit in housed in a painted MS troll for easy mobility. Available with conductivity meter.

CSI 126   Oven universal (Memmerttype)

These are sturdy double walled units with outer chamber made of m.s. sheet duly power coated/painted with inner made up of anodized aluminium or S.S. sheet the gap between inner and outer chamber is filled with high grade glass wool to avoid thermal losses. Beaded heating element is placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjusting perforated shelves to convenient temp.

Temperature is controlled by hydraulic type capillary thermostat from to 250.c+_ 1.c an –L shaped prismatic thermometer is fitted to the unit for reading the temperature. Air ventilators are also provided on the unit. To work on 220/230volts A.C.

OPTIONAL ACCESSORIES

Air circulation fan, [Essential for (e)(f)and (g)]

Digital temperature indicator –cum-controller

PI digital temperature indicator –cum-controller

High temperature oven/driver……………….

CSI 127   Vacuum Oven

These are double walled units with outer made of M.S. sheet duly powder painted and inner made of heavy gauge s. sheet. gap between the two walls is duly filled grade glass wool to avoid thermal loss. Temperature range from ambient to 150.c is controlled by digital temperature controller with an accuracy of +_1.c it is capable of with standing a high vacuum. Provided with vacuum gauge, see through transparent window of toughened glass and one shelf. To work on 220/230 volts A.C. supply.

OPTIONAL ACCESSORIES

PI digital temperature indicator-cum –controller

Vacuum pump 

CSI 128    Bacteriological incubator (Memmert type)

These are study double walled units with outer chamber made of M.S. sheet duly powder coated/painted inner made up of anodized aluminium or S.S. sheet. The gap between inner and putter chamber is filled with high grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjusting perforated selves to convenient height.

The door is fitted with glass viewing window to facilitate inspection of sample without disturbing the test temperature. Temperature is controlled by hydraulic type capillary thermostat From ambient to test temperature. Air ventilators are also provided on the sides of unit. To work on 220/230 volts A.C. supply.

OPTIONAL ACCESSORIES

Air circulation fan, [essential for (e) (f) and (g)

Digital Temperature Indicator- Cum – Controller

PI Digital Temperature indicator –cum- Controller (air circulation fan compulsory)

CSI 129   EGG Incubator

Outer wall is made up of M.S. sheet duly painted and inside of SS the gap between inner and outer wall is fitted with high grade mineral glass wool. Temp rang from ambient to 70.c is controlled by “JUMO” / “EGO” GERMAN capillary type thermostat with an accuracy of +_0.5.c the unit is provided with manual tilting device, so as to tilt tray holding the eggs. To work on 220,230 volts A.C. supply.

OPTIONAL ACCESSORIES

Digital temperature controller

CSI 130 Muffle Furnace Rectangular

Light weight ceramic fiber wool insulation (instead of brick insulation). The outer casting is made of double walled thick P.C.R.C. sheet, duly powder coated. Heighten elements are made of KANTHAL “A-1” wire and backed by high temperature insulation, which avoids loss of energy. Temperature control unit consists of energy regulator, fitted in front of furnace with two pilot lamps. The apparatus is complete with one pyrometer, thermocouple, silver thermal fuse, main lead with power plug. To work on 220/230 volts of 400/440 volts A.C. maximum temp. is 1000.c and working temp.950.c for model of higher temperature the maximum temp. is 1200.c, 1450.c and working temo.1150.c& 1400.c

OPTIONAL ACCESSORIES

Digital temperature indicator-cum-controller extra. For 950.C

PID Temperature controller

CSI 131 Circulating Water Bath

A highly in demand instrument where is required to be circular to be circular to some external source through an f. h. p. pump. Most useful for circulating water to Abe refract meter, condenser coils etc. temperature from ambient to 90.c is controlled through hydraulic type thermostat with an accuracy of +_ 0.5.c inner chamber made of S.S. and outer chamber made  of m.s. sheet duly power coated. Inside bath size 8”x9”x101/2  With a cover at side of size:10”x7” approx. To work on 220x230 volts

CSI 132  Water Bath Rectangular (Single Wall)

Made out of heavy gauge S.S. with concentric rings. Auto-cut heating elements are fitted. To protect the same when bath gets dry. To work on 220/230 volts A.C. supply.

300x250x100mm(6holes of 75mm dia)

355x405x75mm(12holes of 75mm dia)

CSI 133 Water Bath Rectangular Thermostatic (Double Walled)

It is double walled bath with inner chamber made of stainless and outer wall of M.S. sheet duly powder coated/painted. The gap between outer and inner walls in filled with special grade glass wool insulation. The concentric ring can be remove to accommodate containers of various size. Temperature from ambient to 90.c +_2.c is too controlled by thermostat.

OPTIONAL ACCESSORIES

Digital temperature controller 

PID temperature controller 

CSI 134  Serological water bath

These units are double walled with inner chamber made up of S.S. sheet and outside of M.S. duly power oated. The gap between the walls is filled with special grade glass wool in order to avoid thermal loses. A drain plug is also fitted to the unit, the inner chamber fitted with immersion type heating element is covered with perforated removable diffuser tray. The cover is provided with the unit as a standard accessory. Temperature from ambient to 100.c is controlled by hydraulic capillary type thermostat with an accuracy of +_ 1.c supplied complete with 220/230 volts A.C. supply.

OPTIONAL ACCESSORIES

Stirring arrangement with 1/20 H.P. Motor and speed regulator

Digital temperature indicator- cum –controller.

PID temperature controller

CSI 134 (A) Refrigerated Water Bath

Double walled outer M.S. painted, inner S.S. temp. digitally controlled %.C to 60.c+_1.c with heating. Cooling & stirring system.

CSI 135 High Precision Water Bath (With stirring arrangement)

Double wailed chamber has inner made up of thick PCRC sheet duly power coated. A glass window is provided on the front side for an easy inside view. A high speed stirrer with a motor of 1/20hp is fitted to the unit for continuous stirring and thus maintaining a uniform temperature. A speed regulator & digital indicator controller is provided on the front panel to control speed of the stirrer and temperature of bath, the heating mechanism comprises of set of heaters pertaining to faster and slower heating controls the temperature with a sensitivity of +0.1.c, from ambient to 100c to work on 220/230 volts A.C supply.

Chamber size: 430x240x265mm (approx.27ltr.Cap.)

OPTIONAL ACCESSORIES

PI digital temp. indicator-cum-controller

CSI 136 Water Bath Incubator Shaker (Metabolic Shaking Incubator)

It is a double walled unit with inside made of thick S.S. sheet and outer made of M.S. sheet duly power coated prevents falling of condensed water droplets on the specimens. Heating is achieved through a immersion type heater and the temperature is controlled by hydraulic type thermostat with an accuracy of +_ 0.5.c. the bath has an oscillating tray riding on ball rollers oscillated through a geared variable speed motor. Shaking speed range is between 40 to 140 cycles per minute. The shaking tray can either hold test tubes or Erlenmeyer flask of 25ml or 100m or 250 ml or 1000ml. as ordered by the users. (Kindly mentioned the capacity on the flask while ordering). Supplied complete with one shaking tray, paramedical cover, L-shaped thermometer cord and plug, to work on 220/230 volts A.C. supply. Available with heating arrangement only (having temperature range from ambient to 100.c ) or with both heating and cooling arrangements (having temperature range from 5.c to 60.c)

OPTIONAL ACCESSORIES

Spare shaking tray or test tube rack for part (A),(B).or (C)

Digital temperature indicator-cum-controller

PI digital temperature indicator-cum-controller

Digital R.P.M. Meter      

CSI 137 Oil Bath High Temperature

Double walled with inside made of heavy S.S. and outside of M.S. sheet duly power coated. The gap between the two walls is fitted with high grade glass wool to minimize thermal loss temperature range from ambient to 250>c+_2.c is controlled by hydraulic capacity type thermostat. A variable speed stirring arrangement is fitted to the unit for maintaining temperature plug to work on 220/230 volts A.C. supply.       

OPTIONAL ACCESSORIES

Digital temperature indicator- cum- controller

PI digital tem. indicator-cum-controller 

CSI 138 Tissue Floatation Bath

This double walled unit is most suited for preparing wrinkle free tissue specimens. Insides is made up of aluminium S.sheet and outside of M.S. sheet duly power coated. Temperature range from ambient to 90.c+_2,c is controller hydraulic type thermostat. Complete with indicators. Cord and plug, to work on 220/ 230 V.A.C. supply, inside Size:200mm (DIA)x70mm(depth)

CSI 139  Syringe Needle Destroyer

To destroy syringe needles from 18Gto26G, needle burns, noise free with electrical cutter.

Platform Size

Holding Capacity

With motor Capacity

45x45cm

49 Flasks of

25 ml

45x45cm

36 Flasks of

50 ml

45x45cm

25 Flasks of

100 ml

45x45cm

16 Flasks of

250 ml

45x45cm

9 Flasks of

500 ml

55x55cm

36 Flasks of

100 ml

55x55cm

25 Flasks of

250 ml

55x55cm

16 Flasks of

500 ml

65x65cm

36 Flasks of

250 ml

65x65cm

25 Flasks of

500 ml

105x105cm

81 Flasks of

250 ml

105x105cm

64 Flasks of

500 ml

105x105cm

49 Flasks of

1000 ml

180x180cm

Any configuration req.

OPTIONAL ACCESSORIES

Microprocessor based digital PRM counter

Automatic 0-60 minute “GERMAN” TIMER

CSI 141 V.D.R.L. Rotator

Used for V.D.R.L. tests, blood grouping test, various agglutination tests or for mixing of solutions in small bottles, flasks or beakers, it has a platform of size 300x300mm. and can accommodate blood bottles slides or flasks using a spring holder. Supplied complete with cord and plug to work on 220/230 colts A.C.

Fixed speed (Fixed at 180 RPM)

Variable speed

OPTIONAL ACCESSORIES

Automatic 0-60 minutes “German” TIMER

Microprocessor based Digital RPM meter

CSI 142 Kahn (Reciprocating) Shaking Machine

Kahn racks, bottle or flask of different size can be shaken by adjusting the compartments provided on the shaking rack. DC Motor drives with contuously variable electronic speed regulator from 140to250 rpm approximately. To work on 220/230 volts. A.C. supply.

PLATFORM SIZE BODY

20”x13”x4”

31”x17”x4”

36”x18”x4”

OPTIONAL ACCESSORIES

Microprocessor based digital RPM Counter

Automatic0-60minutes”GERMAN”Timer

CSI 143 Wrist Action Shaking Machine

It has a heavy cast iron with rugged construction and side arms for holding flasks. Fitted with a F.H.P. heavy duty motor with variable speed. Can hold flasks from 100to 1000ml. capacity. Supplied with cord and plug to work on 220/230 volts A.C. supply..

To hold 4 flask

To hold 4 flasks and top platform to hold 4 flask/ bottles

To hold 8flasks

To hold 8 flasks and top platform to hold 4 flask/ bottles

OPTIONAL ACCESSORIES

Automatic 0-60 minute “German” timer

Microprocessor based digital RPM meter

CSI 145 Melt Flow Indexer For Plastic (Digital)

The melt flow index apparatus is used to determine the flow of thermoplastic.(Temperature range 0to199.c )Complete with weight & position.

CSI 146  Vortex  Shaker (test tube shaker)

Useful for stirring centrifugal tubes. Test tube or small flask. Fitted with a neoprene rubber cup mounted eccentrically on the shaft against which at its is held the tube with its lower end pressing against the cup. Mixing action is controlled by varying the angle and pressure of the tube against the cup. Fitted with speed control arrangement. To work on 220/230 volts A.C. supply.

With on/off switch

With touch on/off type

CSI 147 Flocculator (jar testing apparatus)

Flocculator has been specially designed for use in water treatment plants to correctly estimate the dosing of alum and such other coagulants for treatment of water and sewage. In provides identical test conditionals for all samples. Illuminated base consists of fluorescent tube mounted below translucent plastic plate to provide diffused cold light through flock sample. Flocculate

Consists of geared continuous run heavy duly 1/20 H.P. Variable speed motor from 10to100 RPM. With built in speed control S.S. stirring rods are provided with adjustable spacer to adjust the depth of stirring paddles. The stirring shaft can be removed without disturbing other stirrers. This unit is supplied without beakers to work on 220/230volts A.C.

OPTIONAL ACCESSORIES

Attachment for feeding docs to all stirring units simultaneously

Automatic 0-60 minute “German” timer

Micros coprocessor based digital RPM counter

CSI 148 Mortuary Chamber

Double walled outer M.S. painted, inner S.S. temp.2.c to5.c digitally controlled. With movable S.S. trays, compressor and door locking system. We are manufacturers of mortuary chambers; our mortuary chambers are conceptualized and designed for long storage of cadaverous under hygienic and cool conditions. Our mortuary chambers are made of corrosion free metal components with advance poly uretherane insulation ensulation ensuring maximum thermal efficiency and durability.

We specialize in both standard and customized models of mortuary chamber specially designed to meet various special requirements for our customers…………………………P.O.R.  

CSI 149 Magnetic Stirrers (Heavy Duty Permanent Magnet)

It has a compact stirring device utilizing a roating magnetic fied (created by a Permanent magnet) which induces variable speed stirring action. Stirring is accomplished by means of small Teflon rotor, which when placed in the liquid to be stirred is capable of rotation by magnetic field applied from below the container. The unit is fitted with lamp. To work on 220/230 volts. A.C.

CSI 150 Laboratory Stirrer

The motor stirrer maximum speed upto 4000 R.P.M. unit is clamped to a C.P. rod fitted on a heavy cast iron base. The height and angle of the stirrer can be adjusted according to the requirement. Variable speed motor with speed regular is fitted with S.S. stirrer rod to give smooth and noiseless operation.

OPTIONAL ACCESSORIES

Automatic 0-60 minutes “GERMAN” Timer

Varic speed regular (Heavy Duty)

CSI 151 Emulsifier (Homogenizer)

Fitted with F.H.P. motor having speed regulator and maximum speed 4000 RPM with perforated S.S. disc. the unit is having arrangement for moving in horizontal and direction(Complete on stand)

With ½ H.P. Motor and S.S. disc and speed regulator

–do-with ¼ H.P. heavy duty motor and speed regulator

–do- with ½ H.P. heavy duty motor and speed regulator

CSI 152 Filter Holder

For Sterlity test: vacuum filter holder for sterility test to hold membrane (without flask)

Made of glass to hold membrane of dia 47mm

Made of S.S.316

CSI 153 Sterility Test Unit

Consists of S.S. holders in manifold of 3 of 6 to hold 47 mm dia, membrane filters, the tops of the holders are connected to the flushing tube with silicon tubing and glass stop cock. A vacuum / pressure pump.) These units are used for sterlity testing when the membrane filter is to be removed from the holder for incubation in culture media. Filtration areas is 12.5 cm and has a holding capacity of 250ml. through only vacuum is required for filleration; some pressure is required for flushing liquids.

3 branch sterility test unit ( made from SS-316)

6 Branch sterility test unit (made from SS-316)

OPTIONAL ACCESSORIES

Mono block vacuum –cum-pressure pump

Oil free  vacuum pump

CSI 154 Sieve Shaker (Table Top)

Fitted with a FHP motor, it can accommodate six sieves of 8” dia. Speed can be regulated through a continuously variable speed regulator fitted to unit. To work on 220/230 volts A.C.(without sieves)

For 8” dia sieves

For 12”dia sieves

OPTIONAL ACCESSORIES

Automatic 0-60 minute “GERMAN” timer

CSI 155 Gyratory Sieve Shaker/ Rotap Sieve Shaker

Designed to carry upto 7 sieves 0f 8” it is driven by ¼ HP electric Motor, through reduction gear. The sieve table does not rotate but is inclined from the vertical axis the direction. In addition to the gyratory motion of the table, there is an upward and downward movement ensuring that each square inch of the sieve is utilized. The whole gear mechanism runs is with adopter for 8” sieves but without test sieve.

Gyratory shaker

Rotap sieve shaker

OPTIONAL ACCESSORIES

Automatic 0-60 minute “GERMAN” Timer

Adapter sieve shaker

CSI 156  Wet Sieve Shaker (Yoder type)

This yoder type motor driven sieve shaker is for carrying out wet sieve analysis of material. Consists of a water reservoir and a holder for sieves which can take upto 7 sieve of 8” dia. the shaker is driven by ¼ HP motor through a belt drive. Suitable to operate on 230 volts, 50 cycle single phase A.C.

OPTIONAL ACCESSORIES

Automatic 0-60 minute “GERMAN” timer

CSI 159  Medico Centrifuge

With 4x15ml Swing out head. (3500 R.P.M.)

With 6x15ml Swing out head. (3500R.P.M.)

With 8x15ml Swing out head. (3500 R.P.M.)

With 4x50ml Swing out head.(3500R.P.M.)

With 4x50ml Swing out head.(3500 R.P.M.)

With Digital Speed & Digital Timer (3500R.P.M.)

CSI 160 Bottle Washing Machine

Electrically operated with quick release chuck taking wide variety of interchangeable nylon brushes for cleaning syringes, test tubes, bottle etc. model (A) and (B) are table model mounted on a heavy base and have single chuck. Machines with soaking tanks have 12 rinses and two drills chucks to hold variety of brushes, and are mounted on study angle iron frame duly painted.

Table model with ¼ H.P. fixed speed motor

Table model with 1/20 H.P. variable speed motor

With G.I. soaking tank of size 30”x20”x18”

With S.S. soaking tank of size 30”x20”x18”

CSI 161 Lab Willey Grinder (Arthur H. Thomas Type)

The chamber is fitted with a hopper provided with a cover. Three delivery S.S. sieves, of 20, 40, 60 mesh and plastic receiver are supplied. A removable plexi- glass plate, permits observation during operation.

Lab willey grinder heavy duty with 1.00 H.P. motor (Automatic) modified model

CSI 162  Ball Mill (Laboratory type)

Electrically operated having a capacity from a few gms. To 1kg. Or 2kg or 5kg. Fitted with a F.H.P. motor upto 2kg.jar and with ¼ H.P. heavy duty motor for 5kg. Jar. Maximum speed 80R.P.M. supplied with steel balls for mixing and grinding. Operates on 220 volts A.C. mains.

OPTIONAL ACCESSORIES

Automatic 0-60 minute “GERMAN” timer

Variable speed regulator 

Digital RPM meter 

CSI 163 Agate Mortar Pestle  (Fisher Type) Electric

For unattended grinding of non gummy and non fibrous materials. Extensively used for preparing coal samples for calorific tests. The motor revolves and the pestle moves  back and fourth in a pattern reaching  all parts of cast aluminium has adjustable posts to hold  mortars of 75 to 135 mm dia. Thew arm of the pestle driving mechanism  has inged, heavy head which cn be raised to inspect or remove the sample or additional material to be added as disered. A build- in timer permits selection of grinding operation up to 60 min. the grinding vessel and motor  are all completely  covered by a clear acrylic cover. To operate on 220 V.A.C.

With 75 mm dia agate mortar & pestle and “GERMAN” Timer

With 100 mm dia agate mortar & pestle and “GERMAN” Timer

CSI 164  Tissue Homogenizer Electrically Operated

S.S. Rod is fitted with Teflon pestle and grinding vessel of Borosil glass. Fitted with 1/20H.P.4000R.P.M. AC/DC motor with a speed regulator. Fitted on a heavy cast iron base. To work on 220/230 Volts A.C.

OPTIONAL ACCESSORIES

Automatic 0-60 min 1200.00 tee “GERMAN” Timer