Incinerators Systems

We offer our clients a wide range of Solid Waste Incinerator Systems which is specifically designed in order to operate on the controlled air pyrolytic principle of the combustion.

The systems are provided with 2 stage combustion chamber and are meant for loading the waste from the front door directly. The primary chamber can maintain the temperature above 800°C and the secondary chamber can maintain the temperature above 1200° C.

• Heating Media: LDO/HSD/FO/GAS
• Capacity Available: 5 kg. to 2000 kg. per hour
• Fuel Consumption: May vary depends upon calorific value of Hazardous waste

• Compact design, occupying least space
• Hassle free operation with low maintenance
• Scientifically designed by the experts by using advanced techniques and high quality basic materials
• Offered with the high-tech control panel that makes it easy to operate and less man power requirement
• Installed & Operating at small, medium & large scale industries
• Our system is also enlisted with Pollution Control Board
• Auto burners to give cyclonic flame which turns in optimum fuel efficiency

Capacity, Fuel & Power Consumption (Approx)

We offer our clients a wide range of high quality Liquid Waste Incinerator System which is manufactured using quality basic material. These are known for features like high efficiency, longer service life and less maintenance. Besides, these liquid waste incinerator systems can be availed from our clients at competitive prices.

Features

• External Casing: The exterior casing of this unit is made from mild steel plate ( IS 2062 GR.) and further supported with channels and angles internally as well as externally
• Doors: All doors are made of using mild steel ( IS 2062 GR.) and are also lined with a high grade castable cement
• Internal Lining: Inside part of the unit is lined with the high alumina refractory bricks which is backed up by hot & cold face insulation material according to IS 2042 grade
• Stack: A Self supporting chimney along with ladder & sampling point which is given for the disposal of various flue gases and for special requirement its monitoring customized design is provided as well
• Control Panel: A weather proof and powder coated control panel for operating the system in both manual as well as automatic mode. A user friendly control panel contains indicating lamps control switches, automatic timers, on/off push buttons operating systems and temperature controller & indicator
• Burners: Fully automatic, spark ignited and gas or oil fired burners comprising all necessary inter locks which is given in primary as well as secondary chambers along with jet atomizer emitting intense & short flame

• Start up Time: For fast and complete destruction of waste and incinerator has to be pre-fired for attaining the required temperature, Then the waste is charged into an incinerator. The incinerator is under the negative draft and hence when the door is opened mo emitting of hot gases from the door. Further the waste can also be charged at high temperature in this incinerator. This confirms the total destruction of waste without producing odour or smoke. The start up time is only upto 15 minutes in oil fired units and also about an hour in electrical units
• Pollution Control: Scientifically designed including elevated hot hearth, stops the escape of an unburnt waste. The long secondary chamber gives maximum retention time along with the turbulence and temperature of 1100°C. The Incinerator is specifically designed as per the EPA standard

Manufacturer and supplier of Incinerator Systems. These Incinerator Systems are used to incinerate of Bio-medical waste, Hazardous Waste, Municipal Waste, Refinery Waste, Industrial Waste, garbage, Paper Waste.

Our clients can avail from us a wide range of Gas Incinerator which is manufactured using quality basic components. The waste gases include numerous sulfur compounds like (H2S, COS, CS2) that are not released in the atmosphere directly. Hence, incineration is commonly used for the disposal. In order to support the combustion, fuel gas is also needed to retain temperatures mandatory for the oxidation of various sulfur compounds. This is a unique primary purpose of this incineration role. Its secondary function is to scatter the incineration items into the atmosphere. This can be achieved by the discharge at a high temperature by a tall stack. The pollution control agencies can establish the optimum permissible ground level concentration of SO2.

We are engaged in manufacturing and supplying a wide range of Combined (Solid cum Liquid) Incinerator. This is provided with a dual purpose incineration facility by a dynamic operational by using of combined incinerator for incarnating liquid and solid waster altogether. The plant also operates according to the same principle of operation. Further, the efficiency of this combined system is 99% like the individual incineration plants.

We are engaged in offering our clients a wide range of Industrial Common Hazardous Waste Incinerator which is specifically designed to handle the large volumes of waste. Many organizations should prohibit the waste according to the mentioned standards. The hazardous wastes produced by varied industries are unhealthy and dangerous and therefore the organizations must be handled according the Hazardous Waste, Management & Handling Rules, 1989. All the industrial waste are perfectly incarnated by using our incinerators. Besides, the divided organic residues and the highly concentrated effluents like toxic effluents and mother liquors are not suited for biological and physic-chemical treatment. Further, these can also receive proper disposal through the incinerator offered by us.

Avail from us Effluent Treatment Plant (ETP), from the simple plant where an effluent is also neutralized before the discharge to sewer and to complex facilities employing biological and physical processes. This is specifically designed for maximum utilization of resources and decreased total operating costs. Our plants are also widely used for the treatment of effluent which is created by the production processes despite of its strength and amount.

We can also provide these in customized specifications for the cost-effective pollution control.

Our range of effluent treatment plants find application in these below mentioned areas:

• Textile Mills
• Slaughter Houses
• Diaries
• Paper Mills
• Oil Refineries
• Cold Rolling Mills
• Glass Factories
• Chemical Industries
• Processing Industries

Our effluent treatment plants are as per the norms of State Pollution Control Boards. The waste water is also recycled for its re use in gardening and cooling. We also undertake custom made batch and semi automatic or automatic plants which is based on the characteristics, nature and concentration of pollutants and the complete waste volume produced.

We offer our clients a wide range of  Burners which is technically designed to meet the varying conditions. Whether is is a dusty environment of cement plants or road construction or a ventilated process heating plant. It also proves successful in high temperature incinerators of furnaces or a bakery. The importance of fuel economy is needed while designing the burner and our team is always conduct research in the combustion technology field.

Features

• Our offered Burners are carefully designed keeping in mind the every minute details. These are also available in gas & light or heavy oil firing which has completely automatic arrangement along with high/low and on-off or modulating mode of operation with an arrangement for operating on manual controls in the event of series failure
• Besides, These are basically pressure automatized burners which is mostly known as pressure jet burners
• Burner controls as well as prevents fuel wastage in the case of insufficient fuel temperature or pressure and flame failure. System immediately responds to varying loads or demands