Classic Group

Oil Burner Safety Control, is designed for use with fully automatic oil burning equipment. It provides safe light up and shutdown sequences for burners and incorporates pre-purge, pre-ignition ,post-ignition and lock out safety time intervals.In addition the control allows the option of interlocking with the burner air damper system and direct lockout or recycle operating on running flame failure and a two stage firing sequence. Control box TMO 720 operates in conjuction with the FZ 711 photo resistor assembly which monitors oil burner flame.

The TMG 740-2 Gas Burner Control is suitable for most types of fully automatic forced and induced draught gas burners. It provides a safe light-up and shut -down sequence for the burner and incorporates pre-purge, ignition and ignition safety time intervals, start gas flame or pilot gas flame , main flame and modulation stages.The TMG 740-2 control is suitable for use on UV (Ultra Violet) with the UVZ 780 flame detector, or flame ionisation principals of flame detection.

Oil Burner Control LOA 21,LOA 24.....The LOA... series of burner controls serve - in conjunction with the QRB...type light detectors - for the fully automatic start-up and supervision of single or two stage pressure-jet oil burners of small capacity
LAL 1.25, LAL 2.25, LAL 2.65...The burner controls of the LAL... range are designed for the control and supervision of atomizing expanding flame burners of medium to high capacity.They are universally applicable and can be used for both multi-staged and modulating burners as well as for burner of stationary air heaters.

Photocell QRB1,QRB3 Small,compact flame detectors for yellow burning oil flames, available with different sensitivities QRB1, QRB3 Photoresistive Detectors for use with LAL... and RAR 7 - Selenium Photocell with LAL 2.25 and LAE 10 for supervision of oil flames.

One of the world's leading manufacturer of components and complete systems for gas safety and control technology. Classic Engineers being dealers in India for Dung's Gas Train Products offers perfectly matched mechanical , pneumatic and electronic system components for atmospheric and forced air burner heater unit , forced air burners and combustion systems.


Dungs GW..range of Pressure Switches and Differential Pressure Switches are compact adjustable pressure switches for automatic burner controls.They are suitable for switching a circuit on ,off or over on changes in actual pressure value relative to the set reference value.
Dung's Product Range, which is widely used by European Gas Burners Manufacturer.

Dungs Safety Shut-off valves are available in single stage,two stage Models for Gas Burners and Gas appliances. Different models are available depending on fast opening , slow opening, fast closing of solenoid valves. The solenoid valve is used for securing, limiting, shutting off and releasing gas supply to Gas burners and Gas appliances.

Different Ignition Transformers are available for intermittent ignition Oil and Gas Burners which are compact in size and have different specifications.Please inform the model no./specification of Ignition Transformer while ordering.

Different Ignition Transformers of COFI are available for intermittent & continuous application for ignition of Oil and Gas Burners which are compact in size and have different specifications. These transformer are widely used on Ecoflame burners and also by other manufacturer of Burners in Europe. Please inform the model no. / specification of Ignition Transformer while ordering.

CLASSIC GROUP offers the Damper Actuators for Burners from the range of Connectron. Various Models like LKS 120,130,160 are widely used for Single Stage & Double Stage Oil & Gas Burners.

RWF 40.The controller RWF 40 has been designed specifically for the control of multifunctional boiler temperature and pressure control in oil or gas fired heat-generating plants. The RWF40 alongwith the respective detectors ,Pressure detector type QBE 61 temperature detector type QAE 21 used primarily for temperature and pressure control..QBE61 - Pressure Sensor for water,steam or air upto 40 bar is available.

CLASSIC GROUP offers the leading range of fluid handling Solenoid Valves from Luciefer & Parker. These Solenoid Valves are widely used on Oil Burners for oil application.
Various Models with different specifications in Normally Open, Normally Close types are available. Most Popular series used on Oil Burner are 121 K, 122 K, VE 131 X T09. Classic Engineers are also supplying the spare coils for these Solenoid valves.

Air and gas valve with electro hydraulic actuators : electro hydraulic actuators type skp suitable for use with all valves : slow opening , rapid closing skp10 actuator with safety shut-off function. Skp20 actuator with safety shut-off function and integral gas pressure governor skp27 actuator with safety shut-off function and integral gas pressure governor with motorized set point adjuster skp70 air / gas ratio controller with safety shut off function and integral gas pressure governor, operation is a function of air pressure signal.

(QRA 2,QRA 10 C...)The U.V. detectors QRA... . Are used with Gas Burner Controls & Flame Safe Guard Relay for the supervision of gas flames, yellow or blue burning oil flames, and for ignition spark proving.

QRA. UV Detectors are available with plastic, Die cast aluminum housing, with different sensitivities and accessories like Quartz Glass(AGG01),Heat Insulation Glass(AGG02) etc.