Frp Cooling Towers,Dry Cooling Towers,Wooden Cooling Towers,Seamless Cooling Towers,India

FRP Cooling Towers

Wooden Cooling Towers

Seamless Cooling Towers

Round Shaped Cooling Towers

Square Shaped Cooling Towers

Cross Flow Cooling Towers

Natural Draft Cooling Towers

Cooling Tower Spares

Cooling Towers

We are a noted manufacturer and exporter of FRP cooling towers, dry cooling towers, wooden cooling towers, seamless cooling towers, industrial cooling towers. As a quality centric firm, we make sure that all our products are in compliance to ISO standards. Our cooling towers and equipment are known for efficient performance and longer service life. Our cooling towers are installed in various industrial set ups including Aluminum die casting units, A/C plant & cold rooms, Chemical industries, Dairy, Citrus and other food processing industries, Distilleries and Breweries plants, Diesel / Gas Gensets & Megawatt Projects, Glass Mfg. Plant, Herbal,Aromatics & extraction plants, Oil refineries, Steel factory and foundry and across several other industries.

Dry Cooling Towers

We manufacture Dry Cooling Towers / Radiator Cooling towers that are water saving, cost effective and least noise-emitting towers. Our dry cooling towers use the advanced air-cooling technology thus eliminating the need of excess water evaporation. Direct induction from the system to dry cooling tower further eliminates the need of mid-heat exchangers and leads to zero maintenance & long-lasting operational life.

Advantages :

No Scale-formation
No Contamination of air
No Frequent maintenance
No break down
No production loss due to cooling tower
No maintenance cost
Reduce power cost & environment friendly
No need to FRP Cooling Tower
No Water requires after first
No need to raw water tank and pumps.
No Moving parts except fan & motor
No Mixing of dust / dirt / fly ash with water
No need for PHE at Furace & Coil circuit
No de-scaling, fungus
No need of water softening plant & chemicals

Request for Full Specifications

FRP Cooling Towers

Suitable to cool re-cycled water flow from 5M3/Hr to 500M3/Hr in different industries, our FRP cooling towers deliver 100% cooling efficiency. It causes difference in temperature due to uniform water flow over the wet deck and gives maximum cooling efficiency.

Highlighting Features

Compact design
Study structure
Honeycomb type PVC fills
Has maximum heat transfer surface per unit volume
Directly driven fan 'Minimum drift Losses'
Uniform distribution of hot water by rotating arm sprinkler
Non - Corrosive aluminum alloy blades or fan
Storage capacity of sump enhanced
Hot dip galvanized hardware
Bottle shaped profile to withstand wind forces
Best for terrace installations

Request for Full Specifications

Wooden Cooling Towers

We offer wooden cooling towers with multi-blades that are made up of cast aluminum adjustable pitch fan with Hub. The Motor fitted is attached with the system that is special low RPM, TEFC, IP - 55 construction and is very suitable for hot and humid atmosphere. The structural components and other light section of the tower are machined with HDG steel and all joints are bonded with GI bolts and SS nails. The cladding of profile corrugated asbestos cement sheet, the joints of which are lapped to shed water only inside the cooling tower. The treated wooden fills are supported on FRP grids which assure positive and permanent positioning.

Technical Function

Hot water from source is pumped up to the top of the cooling tower.
On top of the FRP Basin is flowed and water moves through target nozzles & flows through the treated wooden plates.
The fresh air is absorbed by the fan and motor from the side louvers of the cooling towers.
The air movement absorbs heat from the water and the cooled water is collected in the RCC tank.

Request for Full Specifications

Seamless Cooling Towers

We nurture expertise in manufacturing seamless cooling towers that are designed & developed with attention to compatibility & high applicability across industries. These are corrosion free, flake / chip / peel resistant towers that hardly need painting or protective coating. Seamlessly engineered, our cooling towers deliver optimum performance in all work conditions. The difference in temperature caused by these cooling towers is due to the uniform water flow over the wet deck. Moreover, maintenance free & durability of these cooling towers makes them highly preferred.

Highlighting Features

Seamlessly engineered
Accurate design & Construct
Honeycomb type PVC fills
Delivers maximum heat transfer surface per unit volume
Minimum drift Losses
Uniform distribution of hot water by rotating arm sprinkler
Non - Corrosive aluminum alloy blades
Corrosion free, flake / chip / peel resistant
Enhanced storage capacity of sump
Hot dip galvanized hardware
Bottle shaped profile
Ideal for terrace installations

Request for Full Specifications

Round Shaped Cooling Towers

These are round shape cooling towers used in different types of industries for cooling the re-cycled water flow from 5M3/Hr to 500M3/Hr. The shape of this tower gives a good appearance and 100% cooling efficiency. The tower leads to difference in temperature and the water flow is uniform over the wet deck and giving maximum cooling efficiency.

Technical Features

The distinguishing features of our product are:

Compact design
Honeycomb type PVC fills to provide maximum heat transfer surface per unit volume
Directly driven fan 'Minimum drift Losses'
Uniform distribution of hot water by rotating arm sprinkler
Non - Corresive aluminium alloy blades or fan
Storage capacity of sump enhanced
Hot dip galvanized hardware
Bottle shaped profile to withstand wind forces
Ideal for terrace installations

Request for Full Specifications

Square Shaped Cooling Towers

We fabricate square shape cooling towers for all types of industries as per clients requirement. These towers cool the water flow (re-cycled water) from 10 M3/Hr to 500 M3/Hr and due to variation in shape it camouflages easily with architectural surroundings. The cooling tower brings difference in temperature from 40 C to 300 C, while the spray nozzles ensure uniform water distribution thus reducing annual operating cost. We ensure to design the nozzles in a manner, which makes it easy cleaning during operation.

Technical Function

Warm water from the heat source is pumped to the water distribution system at the top of the tower.
Water is distributed over the wet deck fill by means of large orifice holes of Spray nozzles.
Air is drawn in through the air inlet louvers at the base of the tower and travels upward through the wet deck fill opposite the tower flow.
Small portion of the water evaporate and removes the heat from the remaining water
Warm moist air is drawn to the top of the cooling tower by the fan and discharged to the atmosphere.
The cool water drains to the basin at the bottom of the tower and is returned to the heat source.

Request for Full Specifications

Cross Flow Cooling Towers

Our cross flow cooling towers are designed & manufactured to deliver utmost space & energy efficient. Another added advantage is that these towers are extremely maintenance free. There is no need of maintenance for the rotary sprinklers or tiny nozzles. One can easily clean the distribution basin and nozzles even when the tower is operating, thus saving pump power. The fan, motor and water distribution system easily maintained.

Technical Function

The tower draws the air through the side and the upwards moving hot water gets collected in the FRP basin fitted on the top and the air passes through the target nozzles and sprinkles over the PVC fills.

Request for Full Specifications

Natural Draft Cooling Towers

These cooling towers does not require fan and PVC fills. 100% guaranteed for No power & No maintenance. Special aero dynamic designed FRP louvers reduces spillage and evaporation loss. Hat Dip galvanized structurals and S.S. Fasteners increase the life time and efficiency of the tower. It can be installed for any range of cooling applications. Non-clog nozzles easy for cleaning and very affordable price for keeping some nozzles as spares.

Request for Full Specifications

Cooling Tower Spares

We use high quality cooling tower spares like Rotary Sprinklers, PVC Fills, Fan Assembly and FRP Castings for cooling towers.

We are also manufacture and supply Cooling tower spares which are available in different sizes for different capacity cooling towers, like:

Nozzles
Sprinkler Pipe
Rotating Sprinkler
Fan
Motor
PVC Fills
Timber Structure Splash Bar

Request for Full Specifications

Our Products

Home | Profile | Our Products | Contact Us | Enquiry