Have a requirement?
Chat with us
Have a requirement?
Chat with us
Laboratory & Pilot Scale Equipment
Mini Rapid Mixer Granulator GMP Model
Get Latest Price
- In compliance with cGMP guidelines
- Modular Design
- Mixing of substances uniformly and homogeneously with special design Mixer & Chopper blades.
- Electro-Pneumatic Operated Discharge
- Quick Interchangeable Pots (2 Ltr, 5 Ltr, 10 Ltr, 15 Ltr.)
- Easy to clean machine
- Fully Automatic Operation through Programmable Logic Controller – PLC (Optional)
- Binder addition system (Optional)
- Flameproof Construction (Optional)
MODEL | CPMRMG-10 |
Gross Volume Ltr. | 10 |
Working volume Ltr.* | 8 |
Mixer Motor (HP) | 1.5 |
Chopper Motor (HP) | 1 |
Compressed Air Pressure (bar) | 6 |
Electrical Supply** | 220 V(± 10 %), 1 Ø, AC |
View Complete Details
Mini Roll Compactor GMP Model
Get Latest Price
CM Mini Roll Compactor is totally based on method of Dry Granulation.
The powder charged in the feed hopper is predensified and fed between two counter rotating rolls.
As the volume decreases through the region of maximum pressure, the material is formed into a solid compacted sheet.
The densified sheets can then be granulated to any desired mesh size with use of CM Granulator or CM Communiting Mill.
CM Mini Roll Compactor is designed to the same principle and mode of operation as that of production size CM Roll Compactor.
MODEL | CPMMRC |
Working Capacity* | 2 to 5 kg / hr. |
Roll Force Max | 8 Tons |
Roll Speed | 3-29 RPM Variable |
Feed Screw Speed | 5-86 RPM Variable |
Electrical Supply** | 2.5 HP, 1Ø, A.C. |
View Complete Details
Mini Roll Compactor with cake Crusher & Granulator
Get Latest Price
Cantilever type Roll Compactor with cake Crusher & Two Stage Oscillating Granulator
This high end model operates in completely enclosed manner to comply with highest standard of cGMP guidelines by optimum utilization and at minimal operating cost and wastage.
FEATURES:- Cantilever rolls design
- In line roll compactor with cake crusher & 2 stage granulator
- Comply with cGMP requirements
- WIP Provision
- Water jacketed
- Contact parts S.S.316 without roll
- Machine mobility
- PLC system
- 21 CFR part 11 compliance. (Optional)
MODEL | CPMMRCCG 100/25 C1 |
Working Capacity | 2 To 5 Kg/hr* |
Roll Size | Ø100 X 25 W |
Roll Speed | 3 To 29 RPM |
Feed Screw Speed (Horizontal) | 60 RPM |
Feed Screw Speed (Vertical) | 200 RPM |
Roll Force | 5 Ton |
Electrical Supply** | 5.5 HP, 1Ø , A.C. |
View Complete Details
Pilot Press GMP Model
Get Latest Price
MODEL | PP- I D | PP- I B | PP- II D | PP- II B |
No of Stations | 10 | 10 | 10 | 10 |
Tooling | “D” | “B” | “D” | “B” |
Max. Output (Tab/hr) * | 25,200 | 25,200 | 25,200 | 25,200 |
Max. Operating Load | 4 Ton | 4 Ton | 4 Ton | 4 Ton |
Max. Pre-comp. Load | - | - | 1 Ton | 1 Ton |
Max. Tablet Dia | 23 mm | 16 mm | 23 mm | 16 mm |
Depth of Fill | 20 mm | 17mm | 20 mm | 17 mm |
Main Electric Motor | 2HP | 2HP | 2HP | 2HP |
Feeder Electric Motor | 0.25HP | 0.25HP | ||
Electrical supply** | 2 HP, 1Ø, A.C. | 2 HP, 1Ø, A.C. | 2.5 HP, 1Ø, A.C. | 2.5 HP, 1Ø, A.C. |
View Complete Details
IOTA Press GMP Model
Get Latest Price
The Single sided rotary tableting machine has been designed to use for tablet making of product of
Pharmaceuticals and any other similar process industries.
- In compliance with cGMP guidelines
- Out put upto 19,200 Tablets/hour.
- Combination Tooling ‘B’ & ‘D’ available to suit the R & D requirements
- Force Feeding System
- AC variable frequency drive for Main Motor and Force Feeder Motor
- Main compression of 40 kN/4 Ton
- Pre-compression of 10 kN/1Ton
- Adjustable upper punch penetration
- Upper guard interlocking
- Lower cam for two different filling depth
- Available in dial-less model also
- Monitoring of individual Punch Force Data with graphical representation (optional)
- Audit trails and summary reports (optional)
- Batch data reporting and printing (optional)
MODEL | CPMIOTA “ B” & “D” TOOLING | CPMIOTA “D” TOOLING | CPMIOTA “B” TOOLIN G |
No. of stations | 4 4 = 8 | 8 | 8 |
Tooling | 4B & 4D | “D” | “B” |
Max. Operating Load | 4 Ton | 4 Ton | 4 Ton |
Max. Pre-comp. Load | 1 Ton | 1 Ton | 1 Ton |
Max. Output (Tab/hr) * | 9,600 | 19,200 | 19,200 |
Max. Tablet Dia (mm) | 23 for “D” Tooling16 for “B” Tooling | 23 | 16 |
Depth of fill (mm) | 17 | 17 | 17 |
Upper punch penetration (mm) | 3 to 6 | 3 to 6 | 3 to 6 |
Main electric motor(Driven through ACVFD) | 2HP | 2HP | 2HP |
Feeder electric motor(Driven through ACVFD) | 0.25HP | 0.25HP | 0.25HP |
Electrical supply** | 2.5 HP, 3 Ø, A.C. | 2.5 HP, 3 Ø, A.C. | 2.5 HP, 3 Ø, A.C. |
View Complete Details
Fluid Bed Processor
Get Latest Price
- cGMP Concept
- Single Pot technology for mixing, granulating, drying, blending.
- Yield nearly approaches 99% with negligible handling losses due to single pot.
- Quick Dismantling of Dutch Sieve & Perforated Sheet at the Product container
- Machine with Inbuilt Blower and AHU
- Online Sampling Device
- Fully Automatic Operation through Programmable Logic Controller
- Accurate temperature control within ± 2 ° C
- Flameproof Construction (Optional)
- Bottom Spraying system (Optional)
** Motor HP will be changed in case of Bottom spraying system
MODEL | Ci-3 |
Container Gross Volume Ltr. | 8 |
Max. Batch Capacity (0.5 bd) kg* | 1.2 to 3 |
Blower Motor HP ** | 2 |
Air Flow (CFM) | 270 |
Steam Pressure (kg/cm2) | 3.5 |
Steam Consumption (kg/hr) | 22 |
Electric Heater Non FLP (KW) | 9 |
Compressed Air Pressure (bar) | 8 |
Drying Temp (C) | 35-80 |
Electrical Supply** | 2 HP, 3Ø, A.C. |
View Complete Details
Tablet Coating Machine
Get Latest Price
MODEL | Ci 375 |
Working Capacity* – kg | 2-4 |
Pan Diameter – mm | 375 |
Pan mouth Diameter – mm | 170 |
Pan Speed – RPM | 2-18 |
Main Drive Motor HP | 1 |
Inlet Fan Air Volume (CFM ± 10 %) | 240 |
Outlet Fan Air Volume (CFM ± 10 %) | 300 |
Electric Heater – kW | 9 |
Compressed Air Pressure (bar) | 6 |
Electrical Supply** | 415 V 10%, 3 Ø, AC |
- Interchangeable pan 12″ with trolley
View Complete Details
Tablet Making Machines
Get Latest Price
IOTA Ci4208 is a premium machine typically designed to cater to Research and Development sections of the pharmaceutical companies. This Single Rotary Tableting Machine confirms to the cGMP norms and is packed with all desired features required by the scientists of today. To meet all the international standards the machine is equipped with features like Supervisory Control and Data Accusation System (SCADA). It can also be provided as PLC controlled machine with limited features.
While designing the machine all the major facets like operator safety, ease of operation and cleaning, minimum changeover time for tool and product were taken into consideration.
The machine confirms to all the required regulatory require-ments like cGMP Norms/Schedule M Requirements/US FDA Regulations in case of Automated Machines.
FEATURES:- In compliance with cGMP guidelines
- Out put upto 19,200 Tablets/hour.
- Combination Tooling ‘B’ & ‘D’ available to suit the R & D requirements
- Force Feeding System
- AC variable frequency drive for Main Motor and Force Feeder Motor
- Main compression of 40 kN/4 Ton
- Pre-compression of 10 kN/1Ton
- Adjustable upper punch penetration
- Upper guard interlocking
- Lower cam for two different filling depth
- Available in dial-less model also
- Monitoring of individual Punch Force Data with graphical representation (optional)
- Audit trails and summary reports (optional)
- Batch data reporting and printing (optional)
MODEL | CPMIOTA “ B” & “D” TOOLING | CPMIOTA “D” TOOLING | CPMIOTA “B” TOOLIN G |
No. of stations | 4 4 = 8 | 8 | 8 |
Tooling | 4B & 4D | “D” | “B” |
Max. Operating Load | 4 Ton | 4 Ton | 4 Ton |
Max. Pre-comp. Load | 1 Ton | 1 Ton | 1 Ton |
Max. Output (Tab/hr) * | 9,600 | 19,200 | 19,200 |
Max. Tablet Dia (mm) | 23 for “D” Tooling 16 for “B” Tooling | 23 | 16 |
Depth of fill (mm) | 17 | 17 | 17 |
Upper punch penetration (mm) | 3 to 6 | 3 to 6 | 3 to 6 |
Main electric motor (Driven through ACVFD) | 2HP | 2HP | 2HP |
Feeder electric motor (Driven through ACVFD) | 0.25HP | 0.25HP | 0.25HP |
Electrical supply** | 2.5 HP, 3 Ø, A.C. | 2.5 HP, 3 Ø, A.C. | 2.5 HP, 3 Ø, A.C. |
View Complete Details
need
details