Comfit low pressure ball valves offer quick, quarter turn shut off valves. With its blow out resistant stem, the low-series is an excellent, cost effective choice for tubing applications for ball valves.
Salient Features
Blow-out resistant stem
Positive handle stops
Straight through flow path
Stainless steel construction
Ranging in size from 1/4” to 1”.
Pressure rating: 2000 psig (137.9 bar) CWP
Temperature rating: -65 °F to 350 °F (-54 °C to 177 °C)
Orifice: 7 mm to 22 mm
Body configuration: Inline
Port connections: ODT, Male Thread, Female Thread, SW, BW.
Technical Specification
Material : Are available in SS 316, Brass, Monel- Alloy 400 & NACE MR-01-75
Thread Standard : NPT as per ANSI B1.20.1 , BSP Taper as per BS21, BSPP as per BS2779, Socket Weld as per ANSI B 16.11, Buttweld as per ANSI B 36.10.
Product Application
The Comfit pipe fittings has been specifically designed for use on chemical, petrochemical, oil & gas, pulp & paper, and instrumentation applications.
We are manufacturing and supplying, ball valves, which have an anti-blow out stem for safety. These go through 100% Hydrostatic testing and are available in following models:
BALL VALVE – 2WAY
MODEL : C2IBV
BALL VALVE – 3WAY
MODEL : C3IBV-L
BALL VALVE – 3WAY
MODEL : C3IBV-T
BALL VALVE – 5WAY
MODEL : CI5BV
BALL VALVE BOLTED TYPE
MODEL : CSBV
Features
COMFIT Ball valves include 2/3/5 way & bolted body & 3 piece design
Choice for material of construction i.e.AISI 316 Carbon Steel, Monel 400
Optional panel mounting or ISO mounting can be supplied
Floting ball design to ensure leak proof shtt-off
Anti-blow out stem for safety
Maximum pressure uoto 5000 psi
Material of construction can be AISI 316, Carbon steel, Monel 400 & supplied to meet the requirement of NACE MR-01-75
Check valves are one primery isolation globe type needle valves, assembled & option drain port is given with plug on the periphery of the flange. The check valves are directly mounted to the vessel or process pipe. Instruments may be directly mounted to the valve outlet or alternatively remotely mounted with gauge lines and impulse pipe work.
Salient Features
Process (Inlet) :
Flange Size : 1/2", 3/4", 1", 1-1/2", 2"
Flange Class : 150#, 300#, 600#, 900#, 1500#, 2500#
We are engaged in manufacturing and supplying of check valves, which are designed for UNI-DIRECTIONAL flow control of fluids & gases. These are provided to our clients in customized specifications as per their requirements.
Features:
Check valve are designed for UNI-DIRECTIONAL flow control of fluids & Gases.
These check valve are blow out proof & leak tight shut off seat design.
Back stopped poppet prevents the spring from being over-stressed.
Cracking pressure includes 1.5, 10,25,50,75 & 100 psig.
Back pressure may be required to reseal the valve with nominal cracking pressure of 5 psig or lower
Sizes available 1/8” to 1” with end connection (male & female) NPT,BSPT,SAE & ODT.
Working pressure 6000 psig.
Choice of material of construction i.e. AISI 316, Carbon steel, Monel 400.
Condensate pots are chambers made from seamless carbon steel pipe and weld caps. The interior of each chamber is cleaned by removing foreign elements. All pipe connections are 3,000# half-couplings mounted on 90 angles assuring proper installation. Salient Features
Body, fabricated from seamless pipe and weld caps.
All pipe connections are 3000# half-couplings & mounted with plastic cap.
All welding as per ASME SEC. IX & butt weld joints will be 100% radiographed and fillet weld will be D.P. tested.
All material will have mother test certificates.
Piping code compliance ASME B31.1 and PED category I, Module - A.
Optional Sour Gas service valves are available confirming to NACE Std. MR - 01 - 75
NPT thread as per ANSI B2.1
Socketweld as per ANSI B16.11
Buttweld as per ANSI B16.9
All condensate are 100% Factory tested prior to shipment.
Thread Standard : NPT as per ANSI B1.20.1 , BSP Taper as per BS21, BSPP as per BS2779, Socket Weld as per ANSI B 16.11, Buttweld as per ANSI B 36.10.
Product Application
Condensate pots are used to catch and hold condensate and foreign material.This helps to keep manifold orifices clean and free of foreign material. They are located upstream of the instrument and have a bottom drain so that they may be cleaned.
We manufacture and supply gauge valves. Bar stock needle valves are designed for standard PTFE stem packing & self centering non-rotating stem, back-seated needle design, it gives complete sealing security. Stem threads above packing protects stem from media.
Salient Features
Size : Inlet
1/2"NPT(M)
3/4"NPT(M)
Size : Outlet
1/2"NPT(F)
1/2"NPT(F)
Connections : NPT, BSPT
Working Pressure - 6000Psig
Temperature Rating - PTFE 450°F (232 C) / Grafoil 700° F (371 C)
Packing - PTFE, Grafoil
Panel mounting on request.
All valves are 100% factory tested prior to shipment.
Lubrication - Dye molly sulphide.
Bonnet Design
Screwed bonnet design
Stem - Ground and thread rolled
Hard seat - with non-rotating stem tip (with ST6). / with rotating stem tip-regulating & Soft seat .
Dust Cap on bonnet pusher protects stem threads from external contamination.
Packing and sealing are leak tight for easy operation.
Technical Specification
Material : Straight configuration fittings, are available in SS 316, Brass, Monel- Alloy 400 & NACE MR-01-75
Thread Standard : NPT as per ANSI B1.20.1 , BSP Taper as per BS21, BSPP as per BS2779, Socket Weld as per ANSI B 16.11, Buttweld as per ANSI B 36.10.
Product Application
Gauge valves are applied in pressure gauges, differential pressure, pressure transmitters suitable for block & bleed assemblies to test pressure source required in sampling line or plug valve.
We are offering to our clients, Gauge Valves in material like Material SS 316, SS 304, C.S., F11, Hastelloy and Monel. These are provided to our clients in customized specifications as per their varied requirements. We offer the following kinds of valves:
We are offering to our clients, Instrument Manifold, which rated for pressures as high as 6000 PSI. These comprises 1/2" NPT(F), pipe to flange or flange to flange connections on 54mm (2 1/8") centers, and 1/4" NPT(F) for drain. The features are as follows:
COMFIT 2/3/5 valve manifolds pipe to pipe (R), pipe to flange (T) and flange to flange (H) designed for connecting system impulse lines & transmitters.
These manifolds consist of 1/2" NPT(F), pipe to flange or flange to flange connections on 54mm (2 1/8") centers, and 1/4" NPT(F) for drain.
The manifolds are rated for pressures as high as 6000 PSI.
Temperature rating : PTFE 450Deg.F(232Deg.C) Grafoil 700 Deg.F(371Deg.C)
Pressure & temperature ratings are selected from ANSI B 16.34 for STD Class 2500
MATERIAL OF CONSTRUCTION : SS 316,SS 304,Monel,C.S, Valve can be supplied to meet current revision of NACE-MR-01-75
Sizes available: 1/4" & 1/2" with NPT BSPT & Socket weld end connections.
Two valve, instrument manifold valves are designed for straight type of remote mounting and for process measurement to static pressure transmitters, With a broad selection of Comfit fittings connections to a large range of inch or metric tubes is possible.
Three & five valve manifold valves are designed for direct mounting or remote mounting for process measurement to differential pressure transmitters with 54mm (2.125”) mounting centres. Salient Features
Process conn. 1/2” NPT(F) or Flange.
Instrument conn. 1/2” NPT(F) or Flange.
Drain conn. 1/4” NPT(F)
Bonnet Design
Screwed bonnet design
Stem - ground and thread rolled.
Hard seat - with non-rotating stem tip (with ST6).
With rotating stem tip-regulating & Soft seat .
Dust Cap on bonnet pusher protects stem threads from external contamination.
Packing and sealing are leak tight for easy operation.
Technical Specification
Material : are available in SS 316, Brass, Monel-Alloy 400 & NACE MR-01-75
Thread Standard : NPT as per ANSI B1.20.1 , BSP Taper as per BS21.
Product Application
The instrument manifold valves, for use with pressure guages, differential pressure transmitters, pressure switches & similar pressure measurement equipment.in chemical, petrochemical, oil & gas, pulp & paper, and instrumentation applications.
We provide monoflange valves. One-piece forged or bar stock body combines a compact design with strength and reduced potential leak paths compared to conventional designs. In monoflange valves one primery isolation globe type needle valve is assembled & option drain port given with plug on the periphery of the flange. Where the valve is directly mounted to the vessel or process pipe. Instruments may be directly mounted to the valve outlet or alternatively remotely mounted with gauge lines/impulse pipe work.
Salient Features
Process (Inlet) :
Flange Size : 1/2", 3/4", 1", 1-1/2", 2"
Flange Class : 150#, 300#, 600#, 900#, 1500#, 2500#
We are engaged in manufacturing and supplying of Monoflange Valves, which go through Hydrostatic shell test performed at 1.5 times the working pressure. We offer various types of valves as below:
Material - C.S. (ASTM A 105), S.S. (ASTM A 182 – F316), Monel M 400, Duplex - ASTM A 182 – F51 Hastelloy C – 276, Valve can be supplied to meet the Current version of NACE MR – 01 – 75
Packing - PTFE, Grafoil
All valves are 100% factory tested prior to shipment.
Lubrication - Dye molly sulphide.
Test conducted - Pneumatic seat test is performed at ¼ of working pressure.
Hydrostatic shell test is performed at 1.5 times the working pressure.
Bar stock needle valves are designed for standard PTFE stem packing & self centering, non-rotating stem and back-seated needle designs. Needle valves gives a complete sealing security. Stem threads above packing protects stem from media.
Salient Features
Bar stock needle valve
Design with back seated blowout proof.
Stem - Ground and thread rolled.
Hard seat - with non-rotating stem tip , - with rotating stem tip-regulating & Soft seat .
Dust Cap on bonnet pusher protects stem threads from external contamination.
Packing and sealing are leak tight for easy operation.
Low torque operating T bar handle.
Externally adjustable gland
Bonnet lock pin fitted as standard for 6000 psig and for high pressure lock plate as per the design required.
Temperature Rating - PTFE 450˚F, (232˚C) / Grafoil 700˚F (371˚C)
Material - SS 316, SS 304, C.S., F11, Hastelloy, Monel, Valve can be supplied to meet the current revision of NACE MR-01-75 (Sour Gas service).
Packing - PTFE, Grafoil
Panel mounting on request.
All valves are 100% factory tested at 1000psig.
Lubrication - Dye molly sulphide.
Technical Specification
Material : Are available in SS 316, Brass, Monel- Alloy 400 & NACE MR-01-75
Thread Standard : NPT as per ANSI B1.20.1 , BSP Taper as per BS21, BSPP as per BS2779, UNEF as per ANSI A 1.1, Socket Weld as per ANSI B 16.11, Buttweld as per ANSI B 36.10.
Product Application
The Comfit pipe fittings has been specifically designed for use on wide variety of fluids on applications such as: sampling lines, hydraulic and pneumatic systems, gages, meters, test benches and panels. Wide variety of fluids on applications such as sampling lines, hydraulic and pneumatic systems, gages, meters, test benches and panels.
We are offering Needle Valves, which include screwed/integral/union bonnet needle valve, High pressure Needle valve, and High pressure Needle valve for severe service. Our valves are available in following models:
SCREWED BONNET NEEDLE VALVE
CSNV
INTEGRAL BONNET NEEDLE VALVE - BAR STOCK -
CINVB
INTEGRAL BONNET NEEDLE VALVE - FORGED -
CINVF
HIGH PRESSURE NEEDLE VALVE
CHPNV
UNION BONNET NEEDLE VALVE - HIGH PRESSURE – SEVERE SERVICE -
CUNVS
UNION BONNET NEEDLE VALVE - LOW PRESSURE -
CUNV
FEATURES
COMFIT Needle valves includes screwed/integral/union bonnet needle valve, High pressure Needle valve, and High pressure Needle valve for severe service.
Straight/Angle design in bar stock or forged body with optional panel mounting.
Metal to metal or ST6 seats. Stem threads rolled and harden stem tip with ST6.
Hard seat- with non rotating stem tip (with ST6), Rotating stem tip (ST6), Regulating stem tip & soft seat.
Variety of end connections includes COMFIT single or double ferrule, Male or Female NPT/ISO threads, Socket weld, Butt weld.
Maxi working pressure/Temp. Rating: 6000 Psig (414 Bar) / PTFE 450 Deg.F (232Deg C), Grafoil 700 Deg. F (371 Deg. C), 10000 Psig (700 Bar) / PTFE 450 Deg.F (232Deg C), Grafoil 700 Deg. F (371 Deg. C)
Material of Construction: AISI 316, AISI 304, Carbon steel, Hastelloy, Monel.
A. V. Valves Industries Manufacturer and supplier of valves, air valves, ball valves, butterfly valves, check valves, butterfly valves, foot valves, globe valves, plug valves and sluice valves etc.
Processing...
