Leishangthem International

AUTOMATIC Battery Life Cycle Tester

Description:

Life Cycle Tester consist of precise timer, which changes the state of battery from discharging to charging and back to discharging at preset time interval. The test stops after the set No. of cycles reached. In case of power failure, the testing stops and when the power is resumed the testing starts from the point where it stopped.

 Features:

 Tests the batteries in accordance with ISI, DIN, SAE, JIS, IEC, BCI, BS etc.

For automotive, industrial and  Maintenance free batteries.

Charge and Discharge 5-500A DC.

Designed with latest Micro-controller Technology.

7 Segment LED display and keyboard for programming and operation.

User-friendly program.

Simple to operate by non-technical person.

Visual indicators for Charge/ Discharge.

Audio/ Visual indicators for test stops.

Technical Specifications:

Discharge time: 1 min to 99hrs 59mins programmable by keyboard

Charging Time: 1 min to 99hrs 59mins programmable by keyboard

Rest Time: 1 min to 99hrs 59mins programmable by keyboard

No. of Cycles: 0-9999 cycles. Programmable by keyboard.

Mode testing: Charge/ Discharge/ Cycling Selectable.

Accuracy: 0.25 to 1.00% of FSD for Current, 0.10 to 0.25% of FSD for Voltage

Cycling :Charge-Rest-discharge-Rest, Discharge-Rest-Charge-Rest, programmable

Charge/ Discharge Termination : Programmable by preset Voltage/ preset time.

Display : By 7 segment LED, voltage, Current, Temprature-3 ½ digits. Real time, Elapsed Time, Cycles and Ampere-Hr.-4digits.

Data Logging: the data’s of voltage, Current AH and temperature with respect to time logged at selected time interval. Charge/discharge log time can be independently programmable. After the completion of the test, Logged datas can be printed out with the help of external printer. Data’s of up to six different voltages, one total voltage, one current, one temperature and one AH can be logged.

RS-232 Serial port: the logged data’s in the memory can be transferred to any IBM PC through RS-232 Serial port. The required software will be supplied.

Automatic Battery Plate Charger

Technical Specifications:

Input Voltage: 415 / 230V /AC Three / Single Phase 50Hz
Output Voltage: 300V. DC (As per requirement ).
Output Current: 1Amp to 100 Amp. (As per requirement)
Wave Form: Full Wave

Protection: Over current, Over Voltage, Short Circuit
Metering: DC Digital Meter to Indicate Charging current & Voltage
Control: Servo based Micro Controller Technology

Battery Plate Pasting Machines

·        The machine is suitable for automotive industrial & VRLA batteries.

·        Belt Pasting with good finish.                                                              

·        Auto feerder for Automotive Grids.

·        Manual feeding for Plates with hanging legs feature available.

• Optimum speed pasting machine
• Double sided pasting
• Low operating cost
• Compact size 
• Suitable for small & medium size industries
• Removes dependence on skilled operators
• A view of the machine with motorized feeding hopper and plate surface finish rollers clearly visible
• Sludge & paste recovery system
• Belt speed variable and setting possibility provided in control panel
• Consistent pasting ensures required plate thickness
• Pasting Speed is 30 to 60 Grid Panels per minute.
• Power : 415 V ,  15 H P
• Pasting Thickness : 1.4 mm to 4.0 mm
• Man Power : 1 Skilled + 2 Unskilled.

This machine is fully integrated with various control equipments for smooth operation.

 \ The salient features of this machine are:

• The machine is semi-Automatic in nature. Only trimming is manual operation
• Suitable for Antimonial & Selenium Alloys for any type of Grid
• Most Suitable to Cast Twin Tubular Spine Grids of size 165mm Spin Length x 145mm Width
• Digital Temperature Controllers for better monitoring & control
• Power: 415v. 22.5KW (Electrically Heated furnance )/ 10.5KW (Diesel or LPG Heated furnace)
• Capacity: 6 to 8 Grid Panels per minute
• Furnace Weight: 800kg