Centrifugal blowers are often made of fabricated sheets of stainless or mild steel. They draw air through the inlet housing and release it at 90 degrees with the assistance of its impeller, from its outlet. Our centrifugal blowers have high efficiency, easy installation and low maintenance. We manufacture a wide range of centrifugal blowers to cater to a large number of industrial applications. Some of the types of centrifugal blowers that we manufacture are:

• Induced Draft Fans (With Direct & V-Belt drive arrangement)
• Forced Draft Fans (With Direct & V-Belt drive arrangement)
• Single Inlet Single Width Fans
• Double Inlet Double Width Fans
• High Pressure
• High Pressure Blower

We manufacture high class industrial axial fans which pull the air from its propeller and throw it in the same direction. They are generally used to for exhausting the stale air, fumes or smoke generated from the industrial processes and supply fresh air and proper room ventilation. Our fans and extractors are easy in installation, low in maintenance, vibration free, less power consuming and noiseless. We also manufacture roof extractors that are mounted on the roofs of industries to aid in ventilation. They are available in three models:

• DIRECT DRIVE ARRANGEMENT ( Starts from 300 mm to 1600 mm )
• V-BELT DRIVE ARRANGEMENT ( Starts from 500 mm to 1600 mm )
• ROOF EXTRACTORS ( Starts from 500 mm to 1200 mm )

We produce heavy duty, compact and vibration free evaporative air cooling machines that converts hot air into cool breeze using the process of evaporation of water. It pulls the Ambient air from outside and passes it through the filters and cellulose pads and then it cools the air through water evaporation. Then its blower circulates the cold breeze throughout a department, Industrial Shed, Hall etc. We are presently manufacturing three kinds of these machines, namely:

• CELLULOSE PAD TYPE AIR WASHER (With Single blower- DIDW Type) (Starts from 3000 CFM to 30000 CFM)
• CELLULOSE PAD TYPE AIR WASHER (With Double blower- DIDW Type) (Starts from 15000 CFM to 60000 CFM)
• SPRAY TYPE AIR WASHER (With Single / Double blower- DIDW Type) (Starts from 10000 CFM to 1,00,000 CFM & above)

We are an industry-leading manufacturer of dust collecting systems. Our product line includes woodworking dust collectors, high-static-pressure dust collectors and portable dust collectors. Our products are used in the automotive, medical, wood, fiberglass and other industries. There are following types of dust collection systems that we offer to our clients:

• PULSE JET TYPE - Conventional Bags (With compressed air cleaning) (Starts from 800 CMH to 40,000 CMH
• PULSE JET TYPE - Cartridge filters (With compressed air cleaning) (Starts from 800 CMH to 40,000 CMH)
• MECHANICAL SHAKING TYPE (Bag shaking through Geared motor) (Starts from 1000 CMH to 15,000 CMH)
• MANUAL SHAKING TYPE (Bag shaking through Manual lever) (Starts from 1000 CMH to 8,000 CMH)
• CYCLONIC SEPARATOR (Starts from 400 MM to 1800 MM DIA )

Note: For bigger quantity / units you have to go in for multiple of above said systems.

We offer cyclonic separator to our clients. It is a mechanical device, which is designed to separate suspended particles from gaseous or liquid stream. The equipment is shaped as a conical cylinder and uses and geometry acceleration to effect separation. A cyclone separator is a very useful piece of equipment for the removal from air streams of particles above 10 micrometer in diameter. The equipment has a settling chamber in the form of a vertical cylinder, so arranged that the particle laden air spirals round the cylinder to create centrifugal forces which throw the particles to the outside walls. There are four common types of cyclone separators, but their principles are based on conventional cyclones. Our cyclonic separators are very effective in collection. Our cyclonic separators are used in the following industries:

• Food industries
• Brass / Metal Buffing Processes
• Flour & Rice Mill (Bran separation process)
• Wood, Rubber, Coal and mostly in every kind of industries

Since, the significance of environmental hygiene has acquired much significance in this era, we offer contemporary products for industrial units in the form of dust proofing/ventilating systems. These systems are used to purify the air from outside by removing the dust particles from it and ventilating the ambient air back to the rooms. Our cost effective and efficient system used by many industries these days. We offer the following types of dust proofing/ventilation systems:
Starts from 3000 CFM up to 1 Lac. and above)

• DUST PROOFING - With Air Cooling arrangement
• DUST PROOFING - Without Air Cooling arrangement
• DUST PROOFING - With Pre Filter & with/without Air Cooling arrangement
• DUST PROOFING - With Pre, Fine Filter & with/without Air Cooling arrangement
• DUST PROOFING - With Pre, Fine, Hepa Filter & with/without Air Cooling arrangement

While many industrial materials are quite non-toxic under normal conditions but, when heated, their by products may be released in the form of highly toxic particulates and gases like chromium, nickel, arsenic, asbestos, cadmium and nitrogen oxides. Breathing of these hazardous fumes and particles for long periods, can damage the lungs and may cause a variety of serious and fatal consequences for the people working in that particular industry.

To overcome such a problem we offer a wide variety of fume and smoke extractors to our clients. These are very efficient, easy to install, easy in usage and quite durable.

Spray painting booths are used for doing coatings of paint on discrete products and equipments during the manufacturing of products in various industries. Often these devices atomize the paint before applying it. We manufacture spray booths with efficient exhaust capture and filtration systems. Our spray painting booths that maintain an average air flow rate (measured when the booth is empty) of:

• 0.3metres /seconds (m/s) for full down draft booths
• 0.4m/s for electrostatic spray painting booths
• 0.5 m/s for any other booths

We offer the following range of spray painting booths:

• SPRAY PAINTING BOOTH - (DRY Type - with filtration system) (Starts from 3 feet to 12 feet )
• SPRAY PAINTING BOOTH - (DRY Type - with water tank system) (Starts from 3 feet to 12 feet)
• SPRAY PAINTING BOOTH - (Wet Type- with water tank & water fall system) (Starts from 3 feet to 6 feet)

These are offered with the following Salient Features:

• Increases humidity in the room / department
• Easy to use and Minimum Maintenance
• Low Operating Cost
• Top rotating Impeller
• No corrosion problem
• High efficiency evaporation
• Atomizes water into a fine mist for rapid evaporation

These humidifiers, find their application in:

• Hotel Rooms
• Nursing Homes & O.T. Rooms
• Food Industries
• Paper & Coir Industries
• Tea & Tobacco Processing Industries
• Fertilizers & Chemical Industries

Technical Specifications:

Performance	Heavy Duty
Humidity Controller	With or Without
Evaporation rate	3 – 5 ltrs./ hr
Empty Weight	10 Kgs.
Electrics	230 V, 50 Hz 1 Phase AC
Power Consumption	100 w
Coverage Area	1000 cubic ft. approx
Dimensions	425 mm dia, 360 mm ht

These are offered with the following Salient Features:

• Easy to Install
• Zero Vibration
• Low Noise Level
• Slek & Compact Design
• Available in Decent Colors
• Dynamically Balanced Impeller
• Heavy Duty Dual Shaft Electric Motor

These find their application in:

• Food & Beverages
• Breweries & Frozen Food Plants
• Food Plazas and Hotel
• Air Conditioned Showroom
• Hospital and Nursing Home
• Pharma Industries
• Shopping Malls & Commercial Buildings

Standards On Environmental Protection:

• Dust Rejection: 80- 90 %
• Insect Rejection: 70- 80 %
• Fume / Gas Rejection: 80- 90 %
• Unwanted Rejection: 80- 90 %

Models Avaialble:

Models	Size (In mm)	Suitable Door Height	Electric Motor Specification			No. Of Blowers	Max. Velocity (At Nozzles)
			H.P.(Amp.)	R.P.M.	Current
CAAC / 1	900	7 Ft.	0.25 x 1	1440	0.75	2	14 -16 m/sec.
CAAC / 2	1050	7 Ft.	0.25 x 1	1440	0.8	2	14 -16 m/sec.
CAAC / 3	1200	7 Ft.	0.25 x 1	1440	1	2	14 -16 m/sec.
CAAC / 4	1500	7 Ft.	0.25 x 2	1440	0.80 x 2	2	14 -16 m/sec.

In Industrial units, where the ventilation systems are already installed and running successfully, there may be malfunctioning of electrical items and mechanical items. Due to improper working of the same, the system will go under break down. In that condition many problems may occur in the plant / shop floor, ultimately which affects the production and quality of the product.
To overcome these problems, we have decided to give the genuine parts to our customers at a reasonable price. The list of the available spares are given below:

• PRE FILTERS - Flange / Cassette type (Efficiency 70 % down to 10 µ )
• FINE FILTERS - Flange / Cassette type (Efficiency 90 % down to 5 µ )
• HEPA FILTERS - Flange / Cassette type (Efficiency 99.9% down to .01 µ )
• WIRE MESH FILTERS - G.I. / AL. / S.S. wire mesh
• CELLULOSE PADS - Imported available with 4", 8" & 12" thickness
• DUST COLLECTION BAGS - Polyester Bags,Cartridge filters & Non woven type
• SOLENOID VALVES - Double diaphragm - Polyester
• ELECTRONIC SEQUENTIAL TIMER - With 6 and 10 Events
• ROTARY AIR LOCKS - With or without Teflon tip
• DAMPERS - Contra Rotating Type (Manual / Mechanical
• AIR GRILLS - M.S. powder coated / Al. powder coated
• GRAVITY LOUVERS - G.I. / Aluminium / M.S.
• ELIMINATORS - PVC / G.I.
• FAN OUTLET SILENCERS - For High Pressure Blower outlets
• CHAIN & SPROCKETS -For rotary air lock
• NOZZLE - PVC / Brass