We offer industrial sound proofing to reduce noise of air compressors placed at construction sites and diesel generators used in industries. For this functions, we have devised two types of sound proofing methods. One of the method is of cladding the room where the DG or the compressor is installed and the other type is to make a canopy for out door or mobile applications. Further, our range includes the following: Room Cladding We provide a 3” thick cladding of rock wool and further fastened with the help of mild steel perforated sheets with a lining of glass fiber tissue for the DG or the compressor, which is placed inside a room. In addition to this, we also provide sound attenuators for the exhaustion of the radiator air. Furthermore, to cool the room, we incorporate our product with axial flow fan with sound proof cowls. This helps to prevent ant kind of sound leakage from the fan and enables to sound proof the room. Canopy The other range is canopy, which is suitable for DG or compressor that is placed out doors or mounted on a trolley. For this, we offer a mild steel frame work with interchangeable panels filled with woven glass pads of 2” thick or more on the mild steel perforated sheets. Furthermore, we also provide fiber tissue protection for the proper holding of the material in the panels. Apart from this, we also provide the axial flow fan in the room to exhaust the excess heat generated by the engines or compressors from the canopy as the containment is smaller than the room.

Our range of acoustic room treatment are incorporated with panel, stuffing, ventilation and doors. The wall panels are made of prefabricated tiles of 700mm X 1100mm to suit wall conditions. In addition, the tiles are pre filled and placed on the wall for direct fitment. Further, the thickness of the tiles is about 0.6 mm GI and the perforations are of 3 mm diameter holes with 8 mm pitch. The perforated open area shall not be less than 40% for maximum absorption of sound levels and all engine frequencies. Further, the stuffing of our products is of 50mm thick and made of mineral wool and 25mm thick of glass fiber wool. It is of 48 kgs density per cubic meter and 24 kgs density per cubic meter respectively. Our stuffing works as the media or the absorption media of sound. For protection of our range, we offer protective film like fiber glass tissue paper, which is made of fine glass fiber. Further bonded with resin bonds and compressed to formulate a smooth and sturdy fine porous protective layer. In addition to this, we also provide ventilation axial flow fan, which are six aero foil blades casted out of aluminum LM 6 grade. These are robust and sturdy for the replenish of air on a regular basis to ensure that the engine does not over heat or does not starve from aspirating air for the burning of its fuel. Apart from this, our products are incorporated with doors of 100mm thick. These are fabricated out of mild steel of 2mm thickness and coated with one coat of epoxy paint to provide a uniform weather protection.

We offer acoustic enclosure and canopy, which are fabricated using sheet metal of thickness 14/16G. These are used to reduce the noise level of DG set and also functions as a weather proof housing. Further, we incorporate genset of multi fold sheet channels and ISMC sections. The enclosure construction is fully bolted and the doors are provided with specially designed hinges. Moreover, lockable handles, battery, fuel tank is housed outside the enclosure. In addition to this, we also use acoustic materials like compressed glass fibber in the form of slabs of 75-100 mm thickness and 96 kg/metric cube density. To increase the durability of acoustic material, we provide resin coated fibber glass tissue on exposed surface of glass wool slabs and the panels are supported by perforated sheets. Our products are surface treatment with weather proof and anti-corrosion treatment (seven tank process) to the entire structure along with pure polyester powder coating. For ventilation, our products are designed in such a way that there are no hot pockets around engine and it is provided with suitable designed engine radiator / or additional axial flow fan that do not allow the temperature to rise more than 5-7°C above ambient temperature. Moreover, the provisions are made in such a way that engine gets combustion air & cooling air within 2° C of ambient temperature. In addition to this, to achieve optimal output and minimum sound level from the DG set, we provide suitable openings with acoustic hoods, which helps increasing the inflow of air required for combustion & forced ventilation. We also incorporated air intake and exhaust fans or single unit velocity axial flow fans as per the requirement of our customers.

With a commitment to provide quality products, we offer reconditioned diesel engine with new alternator and present it as a silent generator to our clients. These generators are available in various range to our customers, which can also be customized as per their specifications. We make use of best quality products in making these sound proof products, which have got usage in varied industries. The products are offered at the most competitive prices to our clients.

We provide complete installation for Diesel and Fuel Oil based power plants as per the requirement of our customers. These are installed with the help of our experienced team and use of latest techniques. Further, our installation services are offered at competitive prices and made of high quality raw materials to ensure optimum performance at clients end.

Our well equipped manufacturing unit enables us in gas generating set erection as per the specific requirement of our customers. The installation of compressed natural gas gensets from 50 kwe to 1160 kwe can be provided on individual basis.

We provide complete installation of compressed natural gas based engine run power plants for our esteemed clients. To offer flawless installation, we have with us services of expert workforce and also a well equipped manufacturing unit. These are cost effective and can be customized to meet the exact requirement of our customers.

With the support of our team who have domain expertise in their respective fields helps us in providing designing, fabrication and erection of exhaust stack. These are offered in accordance with the pollution control board norms. Moreover, our range is offered at minimum cost and are designed and developed to give efficient performance to end users.

We provide complete installation of diesel A.C. power generating sets as per the given specifications and requirements of our customers. These are fabricated with superior grade raw materials to enhance the durability and efficient performance at clients end.

With our domain expertise, we are able to provide complete diesel and fuel oil based power plants to our esteem customers. These erection is offered as per the demands and requirements of our clients. Moreover, our range is offered at affordable price and within a short time span.

Our wide range of industrial blowers are fabricated as per AMCA 210 standards. In addition to this, we use mild/ stainless steel in our products and are aerodynamically designed in order to provide maximum efficiency to the blower. Further, for the required combination of air quantity and static pressure, we specially design the impeller and rotor. Apart from this, the shaft used in our range have 20% higher speed than the normal operating speed.

We offer to our clients pedestal, bracket and tabular universal types man coolers, which are made of alloy cast aluminum and high efficiency aero foil blades, which are fitted with totally enclosed induction motor. The three types of man coolers we offer include: I. Bracket type man coolers Our range is available in 500 mm(20") to 1000mm (40') diameter with a tilting arrangement of 22.5° angle in vertical positions. The coolers are mainly used in machine shop and other factories like rubber plant, chemical plant etc. II. Pedestal type man coolers Our products are available in 500 mm (20") to 1000 mm (40") diameter. These are incorporated with a tilting arrangement of 22.5° angle in vertical positions as well as on any side in horizontal positions. Further, our range is widely used in machine shop floor, rolling mill etc. III. Tubular type man coolers These coolers also come in range between 500 mm(20") to 1000 mm(40") diameter with tilting arrangement to 22.5° angle and are mainly used for machine cooling furnace cooling air quenching used in many factories like plywood, rubber, rolling mill etc.